采用自行研制的两种焊丝,进行了新型铝锂合金自动钨极氩弧焊接,测量了焊态下两种焊丝焊接接头的室温力学性能,观察了接头的显微组织和拉伸断口形貌.并采用鱼骨形抗裂实验,评定了该合金的热裂纹敏感性.实验结果表明,焊接工艺规范显著影响接头的焊缝成形,采用交流脉冲焊接方法和研制焊丝作填充材料可明显改善合金的抗裂性能,焊态下两种研制焊丝的接头强度系数均能达到60%.
参考文献
[1] | 向曙光,蒋呐,王彬,陈代伦.2195铝锂合金热处理工艺与性能[J].铝加工,2002(02):51-53. |
[2] | BROWN W F.Aerospace Structural Metals Handbook[M].Cindas:Perdue University,1998 |
[3] | 熊焕.低温贮箱及铝锂合金的应用[J].导弹与航天运载技术,2001(06):33-40,46. |
[4] | CHEN D L;CHATURVEDI M C .Effects of welding and weld hseat-affected zone simulation on the microstructure and mechanical behavior of a 2195 aluminum-lithium alloy[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,2000,32A(11):2001-2729. |
[5] | 夏德顺.航天运载器贮箱结构材料工艺研究[J].导弹与航天运载技术,1999(03):32-41. |
[6] | ELLIS M B D .Fusion welding of aluminum-lithium alloys[J].Welding & Metal Fabrication,1996,64(02):55-60. |
[7] | 北京航空材料研究院.航空材料焊接性能手册[M].北京:国防工业出版社,1978 |
[8] | GARLAND J G;DAVIES G J.A modified Houldcroft hot cracking test with improved reproducibility[J].Metal Construction and British Welding Journal,1969(12):565-568. |
[9] | A. Kostrivas;J. C. Lippold .Weldability of Li-bearing aluminium alloys[J].International Materials Reviews,1999(6):217-237. |
[10] | 田燕.焊接区断口金相分析[M].北京:机械工业出版社,1991 |
[11] | BJORKMAN G;RUSSELL C .Aluminum lithium alloy 2195 fusion welding improvements with new filler wire[R].MarshallSpace Flight Center,2000. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%