研究了冷拉拔铜包铝细丝合理的退火工艺及其对材料力学性能、铜包覆层组织及界面扩散层厚度的影响规律.结果表明:铜包铝细丝的最佳退火工艺为300℃×60min.低于200℃退火时,铜包铝细丝铜包覆层处于回复阶段,细丝强度从冷拉态的361MPa急剧下降到236MPa,延伸率略有降低;300℃退火后,铜包覆层的再结晶完成,细丝的抗拉强度下降至约152MPa,延伸率升到最高,达到16.3%;400℃退火后,铜包覆层晶粒显著长大,界面处生成脆性金属间化合物,延伸率急剧下降.界面扩散层的厚度随退火温度和保温时间的增加而增大,当退火温度低于300℃时,扩散层厚度随退火时间增加缓慢;当退火温度高于350℃后,扩散层厚度快速增大.延伸率随扩散层厚度的增加先升高后降低,当界面扩散层厚度为2μm时,铜包铝细丝的延伸率最高.
参考文献
| [1] | BRAUNOVIC M;ALEKSANDROV N .Intermetallic compounds at aluminum-to-copper and copper-to-tin electrical interfaces[J].IEEE Holm Conference on Electrical Contacts,1992,18-21(10):25-34. |
| [2] | XU Rongchang,TANG Di,REN Xueping,WANG Xiaohong,WEN Yonghong.Improvement of the matrix and the interface quality of a Cu/Al composite by the MARB process[J].稀有金属（英文版）,2007(03):230-235. |
| [3] | C.G. Kang;Y.J. Jung;H.C. Kwon .Finite element simulation of die design for hot extrusion process of Al/Cu clad composite and its experimental investigation[J].Journal of Materials Processing Technology,2002(1/2):49-56. |
| [4] | 姜喜成;唐可洪;魏福玉.铜包铝线退火工艺的初步探讨[J].电线电缆,1999(01):34-35. |
| [5] | I. E. Lee;D. H. Bae;W. S. Chung;K. H. Kim;J. H. Lee;Y. R. Cho .Effects of annealing on the mechanical and interface properties of stainless steel/aluminum/copper clad-metal sheets[J].Journal of Materials Processing Technology,2007(0):546-549. |
| [6] | HENESS G;WUHRER R;YEUNG W Y.Interracial strength de-velopment of roll-bonded aluminium/copper metal laminates[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2007 |
| [7] | Chih-Yuan Chen;Hao-Long Chen;Weng-Sing Hwang .Influence of Interfacial Structure Development on the Fracture Mechanism and Bond Strength of Aluminum/Copper Bimetal Plate[J].Materials transactions,2006(4):1232-1239. |
| [8] | 王立东;阮雪榆 .Cu/Al双金属固相结合的实验研究[J].机械科学与技术,1996,15(06):606-607. |
| [9] | Won-Bae Lee;Kuek-Saeng Bang;Seung-Boo Jung .Effects of intermetallic compound on the electrical and mechanical properties of friction welded Cu/Al bimetallic joints during annealing[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2005(1/2):212-219. |
| [10] | X. K. Peng;R. Wuhrer .On the interface development and fracture behaviour of roll bonded copper/aluminium metal laminates[J].Journal of Materials Science,1999(9):2029-2038. |
| [11] | 祖国胤,于九明,温景林.在线高频电阻加热工艺对碳钢/铝复合带组织与力学性能的影响[J].中国有色金属学报,2004(08):1431-1436. |
| [12] | 耿相英,何艳玲,李世春.固相扩散Cu/Al界面研究[J].中国石油大学学报（自然科学版）,2006(02):78-80,84. |
| [13] | M. Abbasi;A. Karimi Taheri;M.T. Salehi .Growth rate of intermetallic compounds in Al/Cu bimetal produced by cold roll welding process[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2001(1/2):233-241. |
| [14] | 祖国胤,刘刚,王宁,于九明,温景林.退火工艺对镍/铝复合带金属间化合物的影响[J].材料热处理学报,2007(02):54-59. |
| [15] | 谢军,吴卫东,杜凯,郑凤成,叶成钢,黄丽珍,袁光辉.Al/Cu微米级厚度薄膜扩散连接工艺及显微组织分析[J].原子能科学技术,2004(z1):120-124. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%