对铝合金电解加工工艺特性进行基础实验研究.通过分析影响电解加工平衡间隙的因素,利用正交试验对加工电压、电解液温度及工件进给速度对平衡间隙的影响进行了研究.实验表明:加工电压与工件进给速度的影响较大.并同时利用实验对电解加工中的重要参数平衡状态下的实际体积电化当量ηω进行了计算.
参考文献
| [1] | 赵长喜,李继霞.航天器整体壁板结构制造技术[J].航天制造技术,2006(04):44-48. |
| [2] | X. Jiawen;Y. Naizhang;T. Yangxin .The modelling of NC-electrochemical contour evolution machining using a rotary tool-cathode[J].Journal of Materials Processing Technology,2005(2):272-277. |
| [3] | S. VAN DAMME;G. NELISSEN;B. VAN DEN BOSSCHE .Numerical model for predicting the efficiency behaviour during pulsed electrochemical machining of steel in NaNO_3[J].Journal of Applied Electrochemistry,2006(1):1-10. |
| [4] | BEJAR M A;GUTIERREZ F .On the determination of current efficiency in electrochemical machining with a variable gap[J].Journal of Materials Processing Technology,1993,37(02):691-699. |
| [5] | Haisch T;Mittemeijer EJ;Schultze JW .High rate anodic dissolution of 100Cr6 steel in aqueous NaNO3 solution[J].Journal of Applied Electrochemistry,2004(10):997-1005. |
| [6] | Mount AR.;Clifton D.;Eley KL. .Theoretical analysis of chronoamperometric transients in electrochemical machining and characterization of titanium 6/4 and inconel 718 alloys[J].Journal of Applied Electrochemistry,2000(4):447-455. |
| [7] | 葛媛媛,徐家文,赵建社,王福元.镍基高温合金GH4169电解加工ηω-i曲线测定[J].宇航材料工艺,2006(04):38-41. |
| [8] | 张士林;任颂赞.简明铝合金手册[M].上海:上海科学技术文献出版社,2006:444-500. |
| [9] | CRITCHLOW G W;BREWIS D M.Review of surface pretreatments for aluminium alloys[J].International Journal of Adhesion and Adhesives,1996(16):255-275. |
| [10] | 王建业;徐家文.电解加工原理及应用[M].北京:国防工业出版社,2001:40-65. |
| [11] | 庄楚强;吴亚森.应用数理统计基础[M].广州:华南理工大学出版社,2002:383-495. |
| [12] | 王沫然.MATLAB 6.0与科学计算[M].北京:电子工业出版社,2001:218-220. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%