采用机械合金化工艺制备Cu-xFe(x=1,2,4,质量分数/%)过饱和固溶体,研究时效对其硬度和导电性能的影响.X-ray衍射分析结果表明:机械合金化显著提高了Fe在Cu中的固溶度,Cu-4Fe复合粉末经32h球磨.Fe完全固溶于Cu基体中,此时Cu晶粒尺寸为20nm,点阵常数降低到0.3621nm.硬度和导电率测试结果表明:时效处理能促进过饱和固溶体发生分解,Cu-4Fe过饱和固溶体冷压成型压坯在400℃保温8h后显微硬度HV由时效前的175降低到96,电导率由35%IACS(国际退火铜标准)提高到60%IACS.
参考文献
| [1] | Suryanarayana C.;Boldyrev VV.;Ivanov E. .The science and technology of mechanical alloying[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2001(0):151-158. |
| [2] | NOVAKOVA A A;AGLADZE O V;SVESHNIKOV S V et al.Supersaturated solid solutions and metastable phases formation through different stages of mechanical alloying of FeTi[J].Nano-Structured Materials,1998,10(03):365-374. |
| [3] | 王尔德,刘京雷,刘祖岩.机械合金化诱导固溶度扩展机制研究进展[J].粉末冶金技术,2002(02):109-112. |
| [4] | 陈振华;陈鼎.机械合金化与固液反应球磨[M].北京:化学工业出版社,2006 |
| [5] | SCHWARZ R B;PETRICH R R;SAW C K .The synthesis of amorphous Ni-Ti alloy powders by mechanical alloying[J].Journal of Non-Crystalline Solids,1985,76(2-3):281-302. |
| [6] | HUANG B-L;PEREZ R J;LAVERNIA E J et al.Formation of supersaturated solid solutions by mechanical alloying[J].Nano-Structured Materials,1996,7(1-2):67-79. |
| [7] | Xueran Liu;Yongbing Liu;Xu Ran .Fabrication of the supersaturated solid solution of carbon in copper by mechanical alloying[J].Materials Characterization,2007(6):504-508. |
| [8] | 夏冬生,李博,郭建亭,李谷松,于彦.NiAl（Co）-TiC粉末的机械合金化原位制备纳米复合材料[J].材料工程,2004(09):33-37. |
| [9] | 许士跃,张金仓,钟敏建,陈杭德,张正明,何正明.机械合金化制备的Fe1-xCx固溶体的结构和磁性研究[J].上海大学学报（英文版）,2005(06):550-556. |
| [10] | Fogagnolo JB;Amador D;Ruiz-Navas EM;Torralba JM .Solid solution in Al-4.5 wt% Cu produced by mechanical alloying[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2006(1-2):45-49. |
| [11] | 柏振海,黎文献,唐嵘,谭敦强.机械合金化制备镍基固溶体细微粉末[J].粉末冶金材料科学与工程,2001(01):54-57. |
| [12] | E. Botcharova;M. Heilmaier;J. Freudenberger .Supersaturated solid solution of niobium in copper by mechanical alloying[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2003(1/2):119-125. |
| [13] | V. de P. Martinez;C. Aguilar;J. Marin .Mechanical alloying of Cu-Mo powder mixtures and thermodynamic study of solubility[J].Materials Letters,2007(4/5):929-933. |
| [14] | P. A. Rojas;A. Penaloza;C. H. Worner .Supersaturated Cu-Li solid solutions produced by mechanical alloying[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2006(1/2):334-338. |
| [15] | 左可胜,席生岐,周敬恩,刘国元,朱蕊花.铜锌粉末低温机械合金化[J].中国有色金属学报,2005(10):1577-1582. |
| [16] | 刘平,黄金亮,曹兴国.快速凝固高强度高导电Cu-Cr合金的组织和性能[J].兵器材料科学与工程,1999(01):12. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%