通过T6热处理、蠕变性能测试和SEM,TEM组织观察,研究了T6处理对Ti-6Al-4V合金组织结构与蠕变性能的影响.结果表明,锻造态Ti-6Al-4V合金在400℃/575MPa条件下具有较好的塑性和较低的蠕变寿命,并具有明显的温度敏感性.T6处理可明显提高合金的蠕变激活能和蠕变抗力,与锻造态合金相比,T6处理态合金在蠕变稳态期间具有较低的应变速率,并使蠕变寿命由66h提高到548h.锻造态合金的组织结构由a+β相组成,T6处理后,合金的组织结构由a相与"网篮"相组成,其中"网篮"中大量针状β相沿不同取向析出是提高合金蠕变寿命的主要原因.蠕变期间,合金的蠕变机制是双取向的
参考文献
| [1] | 周廉.美国、日本和中国钛工业发展评述[J].稀有金属材料与工程,2003(08):577-584. |
| [2] | Zhao Yongqing .Research of High Temperature Titanium Alloys[J].Titanium Industry Progress,2001,18(01):33-36. |
| [3] | D.K.Peacock .Aerospase application for titanium[J].Sheet Metal Industries,1988,65(08):406-408. |
| [4] | N. Gey;M. Humbert;H. Moustahfid .Study of the α → β phase transformation of a Ti-6Al-4V sheet by means of texture change[J].Scripta materialia,2000(6):525-530. |
| [5] | Ari-Gur P.;Semiatin SL. .Evolution of microstructure, macrotexture and microtexture during hot rolling of Ti-6Al-4V[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1998(1):118-127. |
| [6] | Lee Woei shyan;Liu Che-Feng .High temperature deformation of Ti-6Al-4V alloy evolution by high strain rate compression tests[J].Journal of Materials Processing Technology,1998,25(1-3):127-136. |
| [7] | L. Zeng;T.R. Bieler .Effects of working, heat treatment, and aging on microstructural evolution and crystallographic texture of alpha, alpha', alpha" and beta phases in Ti-6Al-4V wire[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2005(1/2):403-414. |
| [8] | B.Gong;Z.H.Lai;N.Mitsuo;K.Toshiro .Improvement in tensile properties of a+β type Ti alloys by hydrogen treatment[J].Actal Metal,1993,6(02):121-124. |
| [9] | 张霜银,林鑫,陈静,黄卫东.热处理对激光成形TC4合金组织及性能的影响[J].稀有金属材料与工程,2007(07):1263-1266. |
| [10] | 熊爱明,黄维超,陈胜晖,林海,李淼泉.热处理制度对TC6钛合金显微组织的影响[J].中国有色金属学报,2002(z1):206-209. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%