研究了玻璃纤维制备复合材料夹层结构X-cor的工艺,探索了X-cor夹层结构压缩性能及植入角度、密度、Pin直径等因素对压缩性能的影响.同普通泡沫夹层结构相比,X-cor夹层结构的压缩强度提高9.7倍,压缩模量提高17.9倍.随着植入角的增加,单位体积分数的Pin对X-cor夹层结构的强度和模量的增强效率均提高;不同直径Pin对X-cor夹层结构影响不同,大直径Pin对X-cor夹层结构强度增强效率高;小直径Pin对X-cor夹层结构模量增强效率高.
参考文献
| [1] | Carstensen T;Cournoyer D;Kunkel E;Magee C.X-Cor advanced sandwich core material[A].Seattle,Washington,2001 |
| [2] | Kay B F.RWSTD Airframe Technology-Foundation For The 21th Century[A].Washington,DC,2001 |
| [3] | Partridge IK;Carti DDR;Bonnington T.Manufacture and performance of Z-pinned composites[M].CRC Press,Inc,2003 |
| [4] | 田旭,肖军,李勇.X-cor夹层结构试制与性能研究[J].飞机设计,2004(01):22-25. |
| [5] | 杜龙 .X-cor夹层复合材料力学性能研究[D].西北工业大学,2007. |
| [6] | 颜鸣啤.现代飞机主要用材料[J].航空材料,1980(04):1-7. |
| [7] | 颜鸿斌,孙红卫,凌英,蒋文革,付求舟.树脂基复合材料/泡沫塑料夹层结构成型技术研究进展[J].宇航材料工艺,2004(01):12-15. |
| [8] | PALAZOTTO A N;HERUP E J;HARRINGTON T.An experimental investigation of sandwich panel under low velocity impact[A].Florida:ASCE,1996 |
| [9] | PALAZOTTO A N;GUMMADI L N B;VAIDYA U K.Low velocity impact dama-ge characteristic of Z-fiber reinforced sandwich panels-an experimental study[A].Kissim-Mee:AIAA,1997 |
| [10] | PALAZOTTO A N;GUMMADI L N B;VAIDYA U K et al.Low velocity impact dam-age characteristic of Z-fiber reinforced sandwich panel~an experimental study[J].Computers & Structures,1999,43:275-288. |
| [11] | U. K. Vaidya;A. N. Palazotto .Low Velocity Impact and Compression-After-Impact Response of Z-Pin Reinforced Core Sandwich Composites[J].Journal of engineering materials and technology,2000(4):434-442. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%