欢迎登录材料期刊网

材料期刊网

高级检索

采用透射电镜和扫描电镜研究了SiC纤维增强Ti基复合材料的界面反应,重点分析了C涂层对界面行为的影响.结果表明,C涂层可以明显改善纤维和基体之间的界面结合状况;SiC/C/Ti-6Al-4V复合材料的界面反应产物是主要为TiC,而无C涂层SiC/Ti-6Al-4V的界面反应产物为TiC,Ti5Si3和Ti3SiC2界面反应层生长受扩散控制,其厚度增长满足抛物线生长规律,SiC/C/Ti-6Al-4V由于C涂层消耗完毕前后的不同情况,其界面反应层生长并不完全符合这一规律,C涂层的存在可以有效的抑制界面反应的进行.

参考文献

[1] 傅恒志.未来航空发动机材料面临的挑战与发展趋向[J].航空材料学报,1998(04):52.
[2] 罗国珍.钛基复合材料的研究与发展[J].稀有金属材料与工程,1997(02):1-7.
[3] 赵永庆,周廉,Alain Vassel,曾立英,曲恒磊,毛小南.SiC长纤维增强钛合金基复合材料的界面研究[J].稀有金属材料与工程,2004(04):359-362.
[4] SHSTWELL R A .Fiber-matrix interfaces in titanium matrix composites made with sigma monofilament[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,1999,259:162-170.
[5] 吕祥鸿,杨延清,马志军,陈彦.SiC连续纤维增强Ti基复合材料界面反应扩散研究进展[J].稀有金属材料与工程,2006(01):164-168.
[6] Yang Y.Q.;Werner A.;Dudek H.J. .TEM investigations of interfacial processes in SCS-6 SiC/TiB_2/Super #alpha#_2 composites[J].Composites, Part A. Applied science and manufacturing,1999(10):1209-1214.
[7] 朱艳,杨延清.SiC/Ti基复合材料界面反应的研究现状及发展趋势[J].稀有金属快报,2003(10):4-7.
[8] 吴自勤;王兵.薄膜生长[M].北京:科学出版社,2001
[9] ARNOLD S M;ARYA V K;MELIS M E et al.Reduction of thermal residual stresses in advanced metallic composites based upon a compensating/compliant layer concept[J].Journal of Composite Materials,1992,26(09):1287-1309.
[10] JANSSON S;LECKIE F A .Reduction of thermal stresses in continuous fiber reinforced metal matrix composites with interface layers[J].Journal of Composite Materials,1992,26(10):1474-1486.
[11] XUN Y W;TAN M J;ZHOU J T et al.Processing and interface stability of SiC fiber reinforced Ti-15V-3Cr matrix composites[J].Journal of Materials Processing Technology,2000,10:2215-2220.
[12] Yang YQ.;Kumpfert J.;Dudek HJ. .Interfacial reaction and stability of SCS-6 SiC/Ti-25Al-10NB-3V-1MO composites[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1998(1/2):213-220.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%