欢迎登录材料期刊网

材料期刊网

中国科学院金属研究所 科学出版社
高级检索
  1. 首页
  2. 期刊
  3. 材料工程
  4. 热喷涂粒子氧化机理分析及其保护方法概述

材料工程, 2009, (6): 78-82. doi: 10.3969/j.issn.1001-4381.2009.06.018

热喷涂粒子氧化机理分析及其保护方法概述

张林伟 1, , 魏琪 2, , 李辉 3, , 栗卓新 4,

1.北京工业大学,材料科学与工程学院,北京,100124

2.北京工业大学,材料科学与工程学院,北京,100124

3.北京工业大学,材料科学与工程学院,北京,100124

4.北京工业大学,材料科学与工程学院,北京,100124

基金项目:   北京市教委科技发展项目(KM200610005026;JP00901220 0803)   北京工业大学博士科研启动基金(52009999200701)  

关键词： 热喷涂粒子 , 氧化机理 , 保护方法

Oxidization Behavior of Thermally Sprayed Particles and the Relevant Protective Techniques

热喷涂涂层由大量撞击到基体后变形铺展的扁平粒子堆积而成, 热喷涂过程中粒子的氧化对涂层的相组成、微观组织以及涂层性能都会有较大影响.本文综述了热喷涂粒子在喷涂过程中的氧化机理及减少粒子氧化的方法.

参考文献

[1] 曲敬信;汪泓宏.表面工程手册[M].北京:化学工业出版社,1997
[2] Brandl W;Toma D;Kruger J;Grabke HJ;Matthaus G;Max Planck Inst Eisenforsch GmbH D-40237 Dusseldorf Germany.;OSU Maschinenbau GmbH D-44577 Castrop Rauxel Germany. .The oxidation behaviour of HVOF thermal-sprayed MCrA1Y coatings[J].Surface & Coatings Technology,1997(1/3):21-26.
[3] BHARAT K;PANT V;ARYA B S et al.Development of low-oxide MCrAlY coatings for gas tribune applications[J].Journal of Thermal Spray Technology,2007,16:275-280.
[4] FAUCHAIS P;FUKUMOTO M;VARDELL A .Knowledge concerning splat formation:an invited review[J].Journal of Thermal Spray Technology,2004,13:337-360.
[5] Cheng K;Chen X;Wang HX;Pan WX .Modeling study of shrouding gas effects on a laminar argon plasma jet impinging upon a flat substrate in air surroundings[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,2006(0):724-728.
[6] Syed AA;Denoirjean A;Fauchais P;Labbe JC .On the oxidation of stainless steel particles in the plasma jet[J].Surface & Coatings Technology,2006(14/15):4368-4382.
[7] Espie G;Denoirjean A;Fauchais P;Labbe JC;Dubsky J;Schneeweiss O;Volenik K .In-flight oxidation of iron particles sprayed using gas and water stabilized plasma torch[J].Surface & Coatings Technology,2005(1):17-28.
[8] FAUCHAIS P A;VARDELLE;DUSSOUBS B .Quo vadis thermal spraying[J].Journal of Thermal Spray Technology,2001,10:44-66.
[9] DESJ;AMDE S;SAMPATH S et al.Mechanisms of oxidation and its role in microstructure evolution of metallic thermal spray coatings-Case study for Ni-Al[J].Surface and Coatings Technology,2006,200:5395-5406.
[10] LAGNOUX O;COUDERT J F;WITTMAN K.Study of air entrainment within dc plasma jet[A].Las Vegas:ASM International,2000:71-77.
[11] Planche MP;Liao H;Coddet C .Oxidation control in atmospheric plasma spraying coating[J].Surface & Coatings Technology,2007(1):69-76.
[12] VOLENIK K;LEITNER J;HANOUSEK F et al.Oxides in plasma-sprayed chromium Steel[J].Journal of Thermal Spray Technology,1997,6(03):327-334.
[13] D.A.Stewart;P.H.Shipway .Microstructural evolution in thermally sprayed WC-Co coatings: comparison between nanocomposite and conventional starting powders[J].Acta materialia,2000(7):1593-1604.
[14] Alcala J.;Suresh S.;Sampath S.;Gaudette F. .Instrumented spherical micro-indentation of plasma-sprayed coatings[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2001(1/2):1-10.
[15] VOLENIK K;NOVAK V;DUBSKY J et al.Properties of alloy steel coatings oxidized during plasma spraying[J].Materials Science and Engineering,1997,234-236:493-496.
[16] MENNE U;MOHR A;BAMMER M.Investigation of wear mechanisms of heat exchanger tubes under erosion conditions[A].Las Vegas:ASM International,1993:277-282.
[17] ESPIE G .Oxydation de particules de fer dans un plasma Ar-H2 s′écoulant dans l′air.Influence sur les propriétés du dépt[D].Limoges:University of Limoges,2000.
[18] WILLIAMSON R L;FINCKE J R;CRAWFORD D M et al.Entrainment in high-velocity,high-temperature plasma jets.Part II:computational results and comparison to experiment[J].International Journal of Heat and Mass Transfer,2003,46:4215-4230.
[19] FINCKE J R;CRAWFORD D M;SNYDER S C et al.Entrainment in high-velocity,high-temperature plasma jets.Part I:experimental results[J].International Journal of Heat and Mass Transfer,2003,46:4201-4213.
[20] KAMNIS S;GU S .Numerical modeling of propane combustion in a high velocity oxygen-fuel thermal spray gun[J].Chemical Engineering Progress,2006,45:246-253.
[21] XIONG H B;ZHENG L L;SAMPATH S et al.Three-dimersional simulation of plasma spray effects of carrier gas flow and particle injection on plasma jet and entrained particle behavior[J].International Journal of Heat and Mass Transfer,2004,47:5189-5200.
[22] OBERKAMPF W L;TALPALLIKAR M .Analyis of a high-velocity oxygen-fuel(HOVF) thermal spray torch[J].Journal of Thermal Spray Technology,1996,5(01):53-61.
[23] Kamnis S;Gu S .3-D modelling of kerosene-fuelled HVOF thermal spray gun[J].Chemical Engineering Science,2006(16):5427-5439.
[24] DAI S L;DELPANQU J P;LAVERNIA E J .Microstructural characteristics of 5083 Al alloys processed by reactive spray deposition for net-shape manufacturing[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1998,29:2597-2611.
[25] DIGNAM M J;FAWCET W R;BOHNI H et al.The kinetics and mechanism of oxidation of superpurity aluminum in dry oxygen[J].Journal of the Electrochemical Society,1966,113:656-662.
[26] N.Zeoli;S. Gu;S. Kamnis .Numerical simulation of in-flight particle oxidation during thermal spraying[J].Computers & Chemical Engineering,2008(7):1661-1668.
[27] A.M.Ahmed;R.H.Rangel;V.V.Sobolev .In-flight oxidation of composite powder particles during thermal spraying[J].International Journal of Heat and Mass Transfer,2001(24):4667-4677.
[28] LIN Y J;ZHOU Y Z;ENRIQUE J et al.Numerical study of oxidation behavior during reactive atomization and deposition[J].Metallurgical and Materials Transactions B:Process Metallurgy and Materials Processing Science,2004,35(B):1173-1186.
[29] OKADA M;MARUO H .Gas shording for coating oxidation control[J].British welding Journal,1968,15:371-373.
[30] REITER C;SOLOTHURN;S WITZERLAND .Device for the producton of a protective gas mantle in plasma sparying[P].USA Patent:5154354,1992-10-13.
[31] JACKSON .Method for shielding a gas effluent[P].USA Patent:3470347,1969-09-30.
[32] CHEN H C;DUAN Z;HEBERLEIN J.Influence of shroud gas flow and swirl magnitude on arc jet stability and coating quality in plasma spray[A].Las Vegas:ASM international,1996:553-559.
[33] LARRY N;MOSKOWITZ;DONALD J et al.High desity thermal spray coaitng and process[P].USA Patent:5019429,1991-05-28.
[34] KURODA S;IBARAK;TAKESHI et al.Method of forming metal coating with HOVF spray gun and thermal spry aparaturs[P].USA Patent:2005/0199739 A1,2005-09-15.
[35] Jin Kawakita;Seiji Kuroda;Takeshi Fukushima;Toshiaki Kodama .Development of dense corrosion resistant coatings by an improved HVOF spraying process[J].Science and technology of advanced materials,2003(4):281-289.
[36] A. Dolatabadi;J. Mostaghimi;V. Pershin .Effect of a cylindrical shroud on particle conditions in high velocity oxy-fuel spray process[J].Science and technology of advanced materials,2002(3):245-255.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
作者相关
文章评分
  • 您的评分：
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%

版权所有©2010中国科学院金属研究所中国科技出版传媒股份有限公司

本系统由北京仁和汇智信息技术有限公司设计开发

技术支持：info@rhhz.net