为了获得等径角挤压碳纳米管增强镁基复合材料的最佳挤压温度参数,在不同温度下,采用模角为90°的模具对经退火处理后的碳纳米管增强AZ31镁基复合材料进行了一道次的等径角挤压实验.结果表明:在不同温度下,CNTs/AZ31镁基复合材料经过一道次的等通道角挤压后, 复合材料中有大量的超细晶粒出现.复合材料在220℃挤压时可以得到表面光滑的完整试样,有利于实现多道次的挤压,同时晶粒也得到了较好的细化效果.
参考文献
| [1] | SEGAL V M;REZNIKOV V I;DROBYSHEVSKIY A D.Plastic working of metals by simple shear[J].Russian Metallurgy,1981(01):99-105. |
| [2] | Segal VM. .MATERIALS PROCESSING BY SIMPLE SHEAR[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1995(2):157-164. |
| [3] | BAUGHMAN R H;ZAKHIDOV A A;HEER W A et al.Carbon nanotubes the route toward applications[J].Science,2002,297(5582):787-792. |
| [4] | Deng CF;Wang DZ;Zhang XX;Li AB .Processing and properties of carbon nanotubes reinforced aluminum composites[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2007(1/2):138-145. |
| [5] | Kuzumaki T.;Ichinose H.;Ito K.;Miyazawa K. .Processing of carbon nanotube reinforced aluminum composite[J].Journal of Materials Research,1998(9):2445-2449. |
| [6] | Kyung Tae Kim;Seung II Cha;Seong Hyeon Hong .Microstructures and tensile behavior of carbon nanotube reinforced Cu matrix nanocomposites[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2006(1/2):27-33. |
| [7] | WANG H Y;JIANG Q C;WANG Y et al.Fabrication of TiB2 particulate reinforced magnesium matrix composites by powder metallurgy[J].Materials Letters,2004,58(27-28):3509-3513. |
| [8] | 李淑波,郑明毅,甘为民,吴昆.SiCw/AZ91镁基复合材料及AZ91镁合金的高温变形行为[J].复合材料学报,2005(03):103-108. |
| [9] | Furukawa M.;Horita Z.;Nemoto M.;Langdon TG.;Iwahashi Y. .The shearing characteristics associated with equal-channel angular pressing[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1998(2):328-332. |
| [10] | A. GHOLINIA;P. B. PRANGNELL;M. V. MARKUSHEV .THE EFFECT OF STRAIN PATH ON THE DEVELOPMENT OF DEFORMATION STRUCTURES IN SEVERELY DEFORMED ALUMINIUM ALLOYS PROCESSED BY ECAE[J].Acta materialia,2000(5):1115-1130. |
| [11] | 石凤健 .ECAP工艺与材料组织性能控制的研究[D].江苏大学,2003. |
| [12] | Valiev RZ.;Alexandrov IV.;Islamgaliev RK. .Bulk nanostructured materials from severe plastic deformation [Review][J].Progress in materials science,2000(2):103-189. |
| [13] | 毕见强,孙康宁,刘睿,王素梅,范润华.剪切应变量对Al-3%Mg多晶材料性能的影响[J].人工晶体学报,2005(04):593-596. |
| [14] | HUMPHREYS F J;HATHERLY M.Recrystallization and Related Annealing Phenomena[M].Oxford:Elsevier Science Ltd,2004 |
| [15] | 靳丽 .等通道挤压变形镁合金微观组织与力学性能研究[D].上海:上海交通大学,2006. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%