研究了一种利用蒸汽加热和冷却水冷却的变模温注塑工艺,制定了其工艺流程.以LCD面板为例,通过构建变模温注塑工艺分析模型,利用ANSYS对其加热、冷却过程进行了数值模拟,研究了加热、冷却过程中型腔表面和聚合物熔体的热响应规律,为优化变模温注塑工艺参数提供理论依据.最后,通过构建LCD面板变模温注塑实验生产线,并将分析结果应用于实验生产,验证了模拟分析的有效性和准确性.结果表明,利用本工作提出的变模温注塑工艺,可在不降低生产效率的同时,彻底消除塑件表面熔接痕和提高塑件表面光泽度.
参考文献
| [1] | THEILADE U A;HANSEN H N .Surface microstructure replication in injection molding[J].International Journal of Advanced Manufacturing Technology,2006,33(1-2):157-166. |
| [2] | Chen SC;Jong WR;Chang JA .Dynamic mold surface temperature control using induction heating and its effects on the surface appearance of weld line[J].Journal of Applied Polymer Science,2006(2):1174-1180. |
| [3] | KIM B;YAO D G .Method for rapid mold heating and cooling[P].United States Patent:6846445,2005-01-25. |
| [4] | Donggang Yao;Byung Kim .Development of rapid heating and cooling systems for injection molding applications[J].Polymer engineering and science,2002(12):2471-2481. |
| [5] | JANSEN K M B .Heat transfer in injection moulding systems with insulation layers and heating elements[J].International Journal of Heat and Mass Transfer,1995,38(02):309-316. |
| [6] | Donggang Yao;Byung Kim .Developing rapid heating and cooling systems using pyrolytic graphite[J].Applied thermal engineering: Design, processes, equipment, economics,2003(3):341-352. |
| [7] | 韓志翔;劉文斌 .气体式变模温控制技术应用[R].台北:台湾区计算机辅助成型技术交流协会,2007. |
| [8] | 張沛頎;陳建羽;黃聖杰 等.红外线变模温系统设计与分析[R].台北:台湾区计算机辅助成型技术交流协会,2007. |
| [9] | 邱彥程;楊文賢;許嘉翔 .变模温射出成型之CAE模拟技术[R].台北:台湾区计算机辅助成型技术交流协会,2007. |
| [10] | WILLIAM K;MICHAEL C.Convective Heat and Mass Transfer[M].New York:McGraw-Hill,1980 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%