电弧喷涂成形是新近发展起来的一项重要金属快速成形技术.对比分析电弧喷涂快速成形技术与近终喷射成形和等离子喷涂成形技术之间的差异与特点,综述电弧喷涂在模具快速制造领域的研究应用现状,并讨论了电弧喷涂成形材料,以及喷涂成形雾化与沉积工艺过程中的传热传质、残余应力和氧化行为等关键性问题.最后,展望了电弧喷涂厚成形技术的重点研究方向与解决途径.
参考文献
[1] | 王建强.喷射成形技术的研究发展及展望[J].世界科技研究与发展,2000(01):62-65. |
[2] | 陈永雄,徐滨士,许一,魏世丞,刘燕.高速电弧喷涂技术在装备维修与再制造工程领域的研究应用现状[J].中国表面工程,2006(z1):169-173. |
[3] | MANOL G;FARGHAL M;ENRIQUE L .The effect of ceramic reinforcements during spray atomization and codeposition of metal matrix composites[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1992,23A:831-835. |
[4] | 张济山;孙祖庆 .雾化喷射沉积成形材料制备基本过程的分析[J].北京科技大学学报,1996,18(05):1-18. |
[5] | ORME M;LIU Q B;SMITH R .Molten aluminum micro-droplet formation and deposition for advanced manufacturing applications[J].Aluminum Trans J,2000,3(01):95-103. |
[6] | TRESLON A.Realization of thin shells by thermal spraying[A].Kobe:ASM International,1995:123-125. |
[7] | LUTZ E H .Microstructure and properties of plasma ceramics[J].Journal of the American Ceramic Society,1994,5:1274-1280. |
[8] | LUTZ E H .Plasma ceramics[J].PMI,1993,3:131-137. |
[9] | ZHANG H;NAKAGAWA T.Injection molding tool produced by powder spray of stainless steel[A].Beijing:Springer Netherland,1998:388-394. |
[10] | DA X;LIU Y;YAN X.Study on unbaked ceramic mold casting processes based on rapid prototyping technology[A].Beijing:Springer Netherland,1998:381-387. |
[11] | 徐文骥 .等离子熔射成形法制造零件技术的基础研究[D].大连理工大学,2000. |
[12] | D. I. Wimpenny;G. J. Gibbons .Metal spray tooling for composite forming[J].Journal of Materials Processing Technology,2003(1/3):443-448. |
[13] | GARNER P J .New mold making technique[J].Spine Journal,1971,27:18-21. |
[14] | C. K. Chua;K. H. Hong;S. L. Ho .Rapid tooling technology. part 2. a case study using arc spray metal tooling[J].The International Journal of Advanced Manufacturing Technology,1999(8):609-614. |
[15] | A. P. Newbery;R. M. Jordan;A. R. E. Singer;B. Cantor .Electric arc spray forming of an Ni_3Al based alloy[J].Scripta materialia,1996(1):47-51. |
[16] | MOHANTY P S;HART A.Thermal spray based rapid manufacturing,part refurbishing and reengineering[A].Basel:ASM International,2005:46-48. |
[17] | 宋宝通,于林奇,卫淑玲.电弧喷涂制模技术的研究及应用[J].电加工与模具,2000(01):39-41. |
[18] | 王伊卿 .电弧喷涂制造模具关键技术及材料开发研究[D].西安交通大学,2001. |
[19] | J.C. Fang;W. J. Xu;Z. Y. Zhao .Arc spray forming[J].Journal of Materials Processing Technology,2005(0):1032-1037. |
[20] | Z.Y. Zhao;J.C. Fang;H. Wang;H.Y. Li .Arc Spray Forming of Stainless Steel Mould[J].Key engineering materials,2005(291/292):603-608. |
[21] | J. Wang;X. P. Wei;P. Christodoulou .Rapid tooling for zinc spin casting using arc metal spray technology[J].Journal of Materials Processing Technology,2004(3):283-288. |
[22] | 张富文,秦国义,张婕,宁远涛.超音速电弧喷射成形技术及其在贵金属领域中应用的展望[J].贵金属,2004(02):57-60. |
[23] | RAYMENT T;GRANT P S.Optimisation of an electric arc gun cluster design for the sprayform tooling process[A].Ohio:ASM International,2002:7-10. |
[24] | Paul D. A. Jones;Stephen R. Duncan;Tim Rayment;Patrick S. Grant .Control of Temperature Profile for a Spray Deposition Process[J].IEEE transactions on control systems technology: A publication of the IEEE Control Systems Society,2003(5):656-667. |
[25] | S. Hoile;T. Rayment;P.S. Grant .Oxide formation in the Sprayform Tool Process[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2004(1):50-57. |
[26] | T. Rayment;S. Hoile;P.S. Grant .Phase Transformations and Control of Residual Stresses in Thick Spray-Formed Steel Shells[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2004(6):1113-1122. |
[27] | D. J. Branagan;M. Breitsameter;B. E. Meacham;V. Belashchenko .High-Performance Nanoscale Composite Coatings for Boiler Applications[J].Journal of Thermal Spray Technology,2005(2):196-204. |
[28] | GEORGIEVA P;THORPE R;YANSKI A.An innovative turnover for the wire arc spraying technology[J].Advanced Materials & Processes,2006(04):18-21. |
[29] | Newbery AP;Grant PS;Neiser RA .The velocity and temperature of steel droplets during electric arc spraying[J].Surface & Coatings Technology,2005(1):91-101. |
[30] | A.P. Newbery;T. Rayment;P.S. Grant .A particle image velocimetry investigation of in-flight and deposition behaviour of steel droplets during electric arc sprayforming[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2004(1):137-145. |
[31] | KELLAR M;HUSSARY N;SCHEIN J.Optical diagnostics and modeling of gas and droplet flow in wire arc spraying[A].Nice:ASM International,1998:329-334. |
[32] | WANG X D .Investigations into the two-wire arc spraying process[D].University of Minnesota,1996. |
[33] | GRANT P S .Solidification in spray forming[J].Metallurgical and Materials Transactions,2008,38A:1520-1529. |
[34] | MOULLA L;SALHI Z;PLANCHE M P.On the measurement of substrate temperature during thermal spraying[A].Basel:ASM International,2005:679-683. |
[35] | T. RAYMENT;P.S. GRANT .Modeling the Heat Flow in Spray Formed Steel Shells for Tooling Applications[J].Metallurgical and Materials Transactions, B. Process metallurgy and materials processing science,2006(6):1037-1047. |
[36] | Xiaoling Sheng;Calvin Mackie;Carsie A. Hall III .Heat transfer characterization of the solidification process resulting from a spray forming process[J].International Communications in Heat and Mass Transfer,2005(7):872-883. |
[37] | R. Ghafouri-Azar;J. Mostaghimi;S. Chandra;M. Charmchi .A stochastic model to simulate the formation of a thermal spray coating[J].Journal of Thermal Spray Technology,2003(1):53-69. |
[38] | Yanxiang Chen;Guilan Wang;Haiou Zhang .Numerical simulation of coating growth and pore formation in rapid plasma spray tooling[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,2001(1/2):13-19. |
[39] | Zhu YL;Liao HL;Coddet C .Transient thermal analysis and coating formation simulation of thermal spray process by finite difference method[J].Surface & Coatings Technology,2006(16/17):4665-4673. |
[40] | 刘辉祥,张海鸥,韩光超,王桂兰.机器人等离子熔射路径对皮膜残余应力的影响[J].华中科技大学学报(自然科学版),2004(11):21-23. |
[41] | MATEJICEK J;SAMPATH S .In situ measurement of residual stresses and elastic modul in thermal sprayed coatings,part 1:apparatus and analysis[J].Acta Materialia,2003,51:863-872. |
[42] | Gan ZH;Ng HW;Devasenapathi A .Deposition-induced residual stresses in plasma-sprayed coatings[J].Surface & Coatings Technology,2004(2/3):307-319. |
[43] | Guilan Wang;Yanxiang Chen;Haiou Zhang .Effects of scanning path on the deposition process in rapid plasma spray tooling: Modeling by homogenization theory[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,2003(1/2):124-130. |
[44] | Mostaghimi J.;Chandra S.;Ghafouri-Azar R.;Dolatabadi A. .Modeling thermal spray coating processes: a powerful tool in design and optimization[J].Surface & Coatings Technology,2003(0):1-11. |
[45] | A.P. Newbery;R.S. Grant .Oxidation during electric arc spray forming of steel[J].Journal of Materials Processing Technology,2006(1/3):259-269. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%