欢迎登录材料期刊网

材料期刊网

中国科学院金属研究所 科学出版社
高级检索
  1. 首页
  2. 期刊
  3. 材料工程
  4. TiAl合金板材的制备及研究现状

材料工程, 2010, (5): 96-100. doi: 10.3969/j.issn.1001-4381.2010.05.021

TiAl合金板材的制备及研究现状

杨非 1, , 孔凡涛 2, , 陈玉勇 3, , 肖树龙 4,

1.哈尔滨工业大学,材料科学与工程学院,哈尔滨,150001

2.哈尔滨工业大学,材料科学与工程学院,哈尔滨,150001

3.哈尔滨工业大学,材料科学与工程学院,哈尔滨,150001

4.哈尔滨工业大学,材料科学与工程学院,哈尔滨,150001

基金项目:   国家自然科学基金(50674037)  

关键词： TiAl合金板材 , 铸锭冶金 , 粉末冶金 , 发展趋势

Manufacture and Present Status of TiAl Alloy Sheet

本文综述了铸锭冶金和粉末冶金方法制备TiAl合金板材的工艺和国内外研究现状,介绍了铸轧技术、流延成形以及物理气相沉积等方法制备TiAl合金板材的工艺过程和材料性能,论述了上述方法的特点和发展趋势.

参考文献

[1] Edward A. Loria .Gamma titanium aluminides as prospective structural materials[J].Intermetallics,2000(9/11):1339-1345.
[2] 陈玉勇,孔凡涛.TiAl基合金新材料研究及精密成形[J].金属学报,2002(11):1141-1148.
[3] F.R.N. Nabarro .Two-phase materials for high-temperature service[J].Intermetallics,2000(9/11):979-985.
[4] Tetsui T. .Development of a TiAl turbocharger for passenger vehicles[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(0):582-588.
[5] KIM Y W;DIMIDUK D M .Progress in the understanding of gamma titanium aluminides[J].JOM,1991,8:40-47.
[6] GERLING R;CLEMENS H;SCHIMANSKY F P .Powder metallurgical processing of intermetallic gamma titanium aluminides[J].Advancde Engineering Materials,2004,6:23-38.
[7] D. Hu .Effect of boron addition on tensile ductility in lamellar TiAl alloys[J].Intermetallics,2002(9):851-858.
[8] HUANG B Y;HE Y H;ZHOU K C et al.Grain refining of TiAl alloy by rapid deformation[J].Materials Science and Engineering,1997,A239-240:709-712.
[9] 徐丽华,徐向俊,林均品,王艳丽,宋西平,林志,陈国良,李树索,苏喜孔,韩雅芳.包套锻造对高Nb-TiAl基合金组织的影响[J].材料工程,2004(08):21-24.
[10] SZEWCZAK E;PASZULA J;LEONOV A V et al.Explosive consolidation of mechanically alloyed Ti-Al alloys[J].Materials Science and Engineering,1997,A226-228:115-118.
[11] SENKOV O N;CAVUSOGLU M;FORES F H .Synthesis and characterization of a TiAl/Ti5Si3 composite with a submicrocrystalline structure[J].Materials Science and Engineering,2001,A300:85-93.
[12] SENKOV O N;UCHIC M D;MENON S et al.Crystallization kinetics of an amorphous TiAl sheet produced by PVD[J].Scripta Materialia,2002,46:187-192.
[13] FORES F H;SENKOV O N;BABURAJ E G .Synthesis of nanocrystalline materials-an overview[J].Materials Science and Engineering,2001,A301:44-53.
[14] CLEMENS H;KESTLER H .Processing and applications of intermetallic TiAl-based alloys[J].Advanced Engineering and Materials,2000,2:551-560.
[15] Koeppe C.;Clemens H.;Schretter P.;Glatz W.;Bartels A. .OPTIMIZING THE PROPERTIES OF TIAL SHEET MATERIAL FOR APPLICATION IN HEAT PROTECTION SHIELDS OR PROPULSION SYSTEMS[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1995(1/2):182-193.
[16] BARTELS A;KESTLER H;CLEMENS H .Deformation behavior of differently processed γ-titanium aluminides[J].Materials Science and Engineering,2002,A329-331:153-162.
[17] CLEMENS H .Intermetallic γ-TiAl based alloy sheet materials-processing and mechanical properties[J].Zeitschrift fur Metallkunde,1995,86:814-822.
[18] S.L. SEMIATIN;V. SEETHARAMAN .Deformation and Microstructure Development during Hot-Pack Rolling of a Near-Gamma Titanium Aluminide Alloy[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,1995(2):371-381.
[19] Y-W. Kim;A. Rosenberger;D.M. Dimiduk .Microstructural changes and estimated strengthening contributions in a gamma alloy Ti-45Al-5Nb pack-rolled sheet[J].Intermetallics,2009(12):1017-1027.
[20] SEMIATIN S L;VOLLMER D C;EL-SOUDANI S M et al.Understanding the failure of near gamma titanium aluminides during rolling[J].Scripta Metallurgica,1990,24:1409-1413.
[21] SEMIATIN S L;OHLS M;KERR W R .Temperature transients during hot pack rolling of high temperature alloys[J].Scripta Metallurgica,1991,25:1851-1856.
[22] SEMIATIN S L;SEETHARAMAN V .Load-signature analysis for pack rolling of near gamma titanium aluminide alloys[J].Metallurgical Transactions,1994,A25:2539-2542.
[23] IMAYEV V M;IMAYEV R M;KUZNETSOV A V.Development of novel sheet rolling process of ingot-metallurgy γ-TiAl+α2Ti3Al based alloys for production of sheets with enhanced mechanical properties[A].Darmstadt,Germany:WILEY-VCH Verlag GmbH & Co.KGaA,2003:2257-2264.
[24] 张俊红,黄伯云,周科朝,李志友,何双珍,刘咏,贺跃辉.包套轧制制备TiAl基合金板材[J].中国有色金属学报,2001(06):1055-1058.
[25] 缪家士,林均品,王艳丽,林志,陈国良.高铌钛铝基合金板材的高温包套轧制[J].稀有金属材料与工程,2004(04):436-438.
[26] JEWETT T J;DAHMS M .Protective coatings for reactively synthesizing TiAl sheet material[J].Journal of Materials Science Letters,1996,15:1432-1434.
[27] 江垚,贺跃辉,汤义武,李智,黄伯云.元素粉末冷轧成形及反应合成制备Ti-Al合金板材[J].中国有色金属学报,2004(09):1501-1507.
[28] Jian-Guo Luo;Viola L. Acoff .Processing gamma-based TiAl sheet materials by cyclic cold roll bonding and annealing of elemental titanium and aluminum foils[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2006(1/2):334-342.
[29] Oh J.;Pyo SG.;Lee S.;Kim NJ. .Fabrication of multilayered titanium aluminide sheets by self-propagating high-temperature synthesis reaction using hot rolling and heat treatment[J].Journal of Materials Science,2003(17):3647-3651.
[30] GERLING R;BARTELS A;CLEMENS H et al.Structural characterization and tensile properties of a high niobium containing gamma TiAl sheet[J].Intermetallics,2004,3:275-280.
[31] WANG G;DAHMS M;LEITNER G et al.Titanium aluminides from cold-extruded elemental powders with Al-contents of 25-75at%Al[J].Journal of Materials Science,1994,29:1847-1853.
[32] DAVID E A;JEFFREY A H;ARTHUR V P et al.Processing intermetallic composites by self propagating,high-temperature synthesis[J].JOM,1994,46:31-35.
[33] 刘峰晓,贺跃辉,刘咏,黄伯云,李智.粉末冶金制备TiAl基合金板材的研究现状及趋势[J].稀有金属材料与工程,2005(02):169-173.
[34] CLEMENS H;APPEL F;BARTELS A.Processing and application of engineering γ-TiAl based alloys[A].Darmstadt,Germany:WILEY-VCH Verlag GmbH & Co.KGaA,2003:2123-2136.
[35] R. Gerling;F.P. Schimansky;A. Stark .Microstructure and mechanical properties of Ti 45Al 5Nb + (0-0.5C) sheets[J].Intermetallics,2008(5):689-697.
[36] 张俊红,黄伯云,贺跃辉,周科朝,唐建成.TiAl基合金板材制备技术的发展现状[J].材料导报,2002(02):16-18,53.
[37] ADAMS A G;RAHAMAN M N;DUTTON R E .Microstructure of dense thin sheets of γ-TiAl fabricated by hot isostatic pressing of tape-cast monotapes[J].Materials Science and Engineering,2008,A477:137-144.
[38] Senkov ON.;Uchic MD. .Microstructure evolution during annealing of an amorphous TiAl sheet[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):216-224.
[39] 章德铭,陈贵清,韩杰才,姚振中.EB-PVD制备γ-TiAl基合金薄板的研究[J].航空材料学报,2006(04):35-38.
[40] HAN J C;ZHANG D M;CHEN G Q et al.Microstructure and properties of electron beam-physical vapor deposited TiAl sheet and TiAl and Nb laminated composites[J].Transactions of Nonferrous Metals Society of China,2006,16:s449-s452.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
作者相关
文章评分
  • 您的评分：
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%

版权所有©2010中国科学院金属研究所中国科技出版传媒股份有限公司

本系统由北京仁和汇智信息技术有限公司设计开发

技术支持：info@rhhz.net