利用超音速等离子喷涂技术在45钢表面制备了铁基合金涂层,利用球盘式疲劳磨损实验机评价了铁基涂层在两种载荷条件下的疲劳磨损性能,利用两参数Weibull分布表征了涂层的疲劳寿命,采用扫描电子显微镜(SEM)分析了涂层的微观结构和失效形貌,利用有限元方法研究了涂层内部应力分布.实验结果表明,载荷条件可以显著地影响涂层的寿命和失效形貌,高载下涂层的寿命明显降低;随着载荷的增加,主要失效形式由表面磨损失效转换成剥层失效,其中表面磨损是由于粗糙接触引起,而剥层则与应力分布机制有关.
参考文献
| [1] | 徐滨士.再制造工程基础及应用[M].哈尔滨:哈尔滨工业大学出版社,2005 |
| [2] | 刘家浚.材料磨损原理及耐磨性[M].北京:清华大学出版社,1993 |
| [3] | 关耀辉,徐杨,郑仲瑜,佟晓辉.等离子喷涂纳米FeS涂层的摩擦磨损性能研究[J].摩擦学学报,2006(04):320-324. |
| [4] | 姚舜晖,苏演良,高文显,郑凯文.纳米碳化钨增强镍基合金热喷涂涂层的摩擦磨损性能研究[J].摩擦学学报,2008(01):33-38. |
| [5] | A. Yoshida;M. Fujii .Influence of soft surface modification on rolling contact fatigue strength of machine element[J].Tribology International,2002(12):837-847. |
| [6] | R. Ahmed .Contact fatigue failure modes of HVOF coatings[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2002(3/4):473-487. |
| [7] | AHMED R;HADFIELD M .Rolling contact fatigue performance of detonation gun coated elements[J].Tribology International,1997,30:129-137. |
| [8] | R. Ahmed;M. Hadfield .Failure modes of plasma sprayed WC-15%Co coated rolling elements[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,1999(1):39-55. |
| [9] | X. C. Zhang;B. S. Xu;F. Z. Xuan;S. T. Tu;H. D. Wang;Y. X. Wu .Rolling contact fatigue behavior of plasma-sprayed CrC-NiCr cermet coatings[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2008(11/12):1875-1883. |
| [10] | X. C. Zhang;B. S. Xu;S. T. Tu;F. Z. Xuan;H. D. Wang;Y. X. Wu .Fatigue resistance and failure mechanisms of plasma-sprayed CrC-NiCr cermet coatings in rolling contact[J].International Journal of Fatigue,2009(5):906-915. |
| [11] | X.C. Zhang;B.S. Xu;F.Z. Xuan;S.T. Tu;H.D. Wang;Y.X. Wu .Fatigue Resistance Of Plasma-sprayed Crc-nicr Cermet Coatings in Rolling Contact[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2008(13):3734-3744. |
| [12] | Masahiro Fujii;Akira Yoshida;Jiabin Ma;Sadato Shigemura;Kazumi Tani .Rolling contact fatigue of alumina ceramics sprayed on steel roller under pure rolling contact condition[J].Tribology International,2006(9):856-862. |
| [13] | Masahiro Fujii;Jiabin Ma;Akira Yoshida;Sadato Shigemura;Kazumi Tani .Influence of coating thickness on rolling contact fatigue of alumina ceramics thermally sprayed on steel roller[J].Tribology International,2006(11):1447-1453. |
| [14] | S. Zhu;B. Xu;J. Yao .High Quality Ceramic Coatings Sprayed by High Efficiency Hypersonic Plasma Spraying Gun[J].Materials Science Forum,2005(Pt.5):3981-3984. |
| [15] | 吴子健.热喷涂技术与应用[M].北京:机械工业出版社,2005 |
| [16] | 张平.热喷涂材料[M].北京:国防工业出版社,2006 |
| [17] | 楚建新 .热喷涂镍铝放热反应[J].粉末冶金技术,1987,5(03):147-151. |
| [18] | HERTZ H .On the contact of elastic solids[J].Journal fur die Reine und Angewandte Mathematik,1882,92:156-171. |
| [19] | JOHNSON K L.Contact Mechanics[M].Cambridge:Cambridge University Press,1992 |
| [20] | Kenneth Holmberg;Allan Matthews;Helena Ronkainen .Coatings tribology -contact mechanisms and surface design[J].Tribology International,1998(1/3):107-120. |
| [21] | SUH N P .Overview of delamination theory of wear[J].Wear,1977,44:1-16. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%