欢迎登录材料期刊网

材料期刊网

中国科学院金属研究所 科学出版社
高级检索
  1. 首页
  2. 期刊
  3. 材料工程
  4. 微动疲劳研究进展

材料工程, 2010, (12): 86-91. doi: 10.3969/j.issn.1001-4381.2010.12.019

微动疲劳研究进展

沈明学 1, , 彭金方 2, , 郑健峰 3, , 宋川 4, , 莫继良 5, , 朱旻昊 6,

1.西南交通大学,牵引动力国家重点实验室摩擦学研究所,成都,610031

2.西南交通大学,牵引动力国家重点实验室摩擦学研究所,成都,610031

3.西南交通大学,牵引动力国家重点实验室摩擦学研究所,成都,610031

4.西南交通大学,牵引动力国家重点实验室摩擦学研究所,成都,610031

5.西南交通大学,牵引动力国家重点实验室摩擦学研究所,成都,610031

6.西南交通大学,牵引动力国家重点实验室摩擦学研究所,成都,610031

基金项目:   国家重大基础研究计划资助项目(973项目)(2007CB714704)   国家自然科学基金(50821063)   牵引动力国家重点实验室自主研究资助项目(2008TPL_ZIO)  

关键词： 摩擦磨损 , 微动摩擦学 , 微动疲劳

Study and Development of Fretting Fatigue

介绍了微动疲劳的概念和实验装置,详细综述了微动疲劳的国内外研究现状,全面地分析讨论了微动疲劳的影响因素(接触压力、滑移幅值、实验频率、摩擦力、环境、材料性质)、损伤机理、寿命评估方法和防护措施,并提出了今后研究的展望.

参考文献

[1] WATERHOUSE R B.Fretting fatigue[M].London;Applied Science Publishers Ltd,1981
[2] D. Nowell;D. Dini;D. A. Hills .Recent developments in the understanding of fretting fatigue[J].Engineering Fracture Mechanics,2006(2):207-222.
[3] 周仲荣;VINCENT L.微动磨损[M].北京:科学出版社,2002
[4] 何明鉴.机械构件的微动疲劳[M].北京:国防工业出版社,1994
[5] EDEN E M;ROSE W N;CUNNINGHAM F L .The endurance of metals[J].Proceedings of the Institution of Mechanical Engineers,1911,81(04):839-974.
[6] TOMLINSON G A .The rusting of steel surface in contact[J].Proceedings of the Royal Society A,1927,115:472-483.
[7] WARLOW-DAVIES E J .Fretting corrosion and fatigue strength:brief results of preliminary experiments[J].Proceedings of the Institution of Mechanical Engineers,1941,146:32-38.
[8] ATTIA M H;WATERHOUSE R B.[A].Philadelphia,USA:ASTM STP 1159,1992:1-7.
[9] Kozo Nakazawa;Norio Maruyama;Takao Hanawa .Effect of contact pressure on fretting fatigue of austenitic stainless steel[J].Tribology International,2003(2):79-85.
[10] SATO K;FUJI H;KODAMA S .Crack propagation behavior in fretting fatigue[J].Wear,1986,107:245-262.
[11] NISHIOKA K;HIRAKAWA K .Fundamental investigations of fretting fatigue[J].Bulletin of the JSME,1969,52(12):397-414.
[12] B. Alfredsson .Fretting fatigue of a shrink-fit pin subjected to rotating bending: Experiments and simulations[J].International Journal of Fatigue,2009(10):1559-1570.
[13] BILL R C.Review of factors that influence fretting wear[A].USA:ASTM Publisher,1982:165-182.
[14] WATERHOUSE R B;周仲荣;金雪岩;朱旻昊.微动磨损与微动疲劳[M].成都:西南交通大学出版社,1999
[15] IYER D;MALL S .Effects of cyclic frequency and contact pressure on fretting fatigue under two-level block loading[J].Fatigue & Fracture of Engineering Materials & Structures,2000,23(04):335-346.
[16] VINGSBO O;SODERBERG S .On fretting maps[J].Wear,1988,126(02):131-147.
[17] WATERHOUSE R B .The effect of clamping stress distribution on the fretting fatigue of alpha brass and Al-Mg-Zn alloy[J].Trans Am Soc Lubr Engr,1968,11(01):1-5.
[18] ENDO K;GOTO H .Initiation and propagation of fretting fatigue cracks[J].Wear,1976,38:311-324.
[19] ADIBNAZARI S;HOEPPNER D W .A fretting fatigue normal pressure threshold concept[J].Wear,1993,160(01):33-35.
[20] Z. R. Zhou;K. Nakazawa;M. H. Zhu;N. Maruyama;Ph. Kapsa;L. Vincent .Progress in fretting maps[J].Tribology International,2006(10):1068-1073.
[21] JIN O;MALL S .Effects of independent pad displacement on fretting fatigue behavior of Ti-6A1-4V[J].Wear,2002,253:585-596.
[22] SODERBERG S;BRYGGMAN U;MCCULLOUGH T .Frequency effects in fretting wear[J].Wear,1986,110:19-34.
[23] C. D. LYKINS;S. MALL;V. JAIN .A shear stress-based parameter for fretting fatigue crack initiation[J].Fatigue & Fracture of Engineering Materials and Structures,2001(7):461-473.
[24] POON C J;HOEPPNER D W .The effect of environment on the mechanism of fretting fatigue[J].Wear,1979,52(01):175-191.
[25] COLLINS J A;TOVEY F M .Fretting fatigue mechanisms and the effect of direction of fretting motion on fatigue strength[J].J Mater,1972,7(04):460-464.
[26] FENG I M;UHLIG H H .Fretting corrosion of mild steel in air and in nitrogen[J].Journal of Applied Mechanics,Transactions of the ASME,1954,21(04):395-400.
[27] HALLIDAY J S;HIRST W .The fretting corrosion of mild steel[J].Proceedings of the Royal Society of London,1956,236 A:411-425.
[28] GAUL D J;DUQUETTE D J .The effect of fretting and environment on fatigue crack initiation and early propagation in a quenched and tempered 4130 steel[J].Metallurgical and Materials Transactions,1980,11(09):1555-1559.
[29] 周仲荣;朱旻昊.复合微动磨损[M].上海:上海交通大学出版社,2004
[30] RUIZ C;BODDINGTON P H B;CHEN K C .An investigation of fatigue and fretting in a dovetail joint[J].Experimental Mechanics,1984,24(03):208-217.
[31] Lykins C.D.;Mall S. .An evaluation of parameters for predicting fretting fatigue crack initiation[J].International Journal of Fatigue,2000(8):703-716.
[32] Carlos Navarro;Sergio Munoz;Jaime Dominguez .On the use of multiaxial fatigue criteria for fretting fatigue life assessment[J].International Journal of Fatigue,2008(1):32-44.
[33] L. Chambon;B. Journet .Modelling of fretting fatigue in a fracture-mechanics framework[J].Tribology International,2006(10):1220-1226.
[34] ROOKE D P;JONES D A .Stress intensity factors in fretting fatigue[J].Journal of Strain Analysis,1979,14(04):1-7.
[35] NOWELL D;HILLS D A .Crack initiation criteria in fretting fatigue[J].Wear,1990,136(02):329-343.
[36] GIANNAKOUPOULOS A E;LINDLEY T C;SURE SH S.Application of fracture mechanics in fretting fatigue life assessment[A].West Conshohohocken:ASTM STP,2000:80-89.
[37] T. Hattori;M. Nakamura;T. Watanabe .Simulation of fretting-fatigue life by using stress-singularity parameters and fracture mechanics[J].Tribology International,2003(2):87-97.
[38] WATERHOUSE R B.The effect of surface treatment on the fatigue and fretting-fatigue of metallic materials[A].Oxford;Pergamon Press,1987:31-40.
[39] FU Y Q;WEI J;BATCHELOR A W .Some considerations on mitigation of fretting damage by the application of surfacemodification technologies[J].Journal of Materials Processing Technology,2000,99:231-245.
[40] 朱旻昊,罗唯力,周仲荣.表面工程技术抗微动损伤的研究现状[J].机械工程材料,2003(04):1-3,29.
[41] RAJASEKARAN B;GANESH SUNDARA RAMAN S;JOSHI S V et al.Performance of plasma sprayed and detonation gun sprayed Cu-Ni-In coatings on Ti-6A1-4V under plain fatigue and fretting fatigue loading[J].Materials Science and Engineering,2008,479:83-92.
[42] 何庆复,刘伟,郭少中,张云,陈善忠.列车车轴抗微动损伤热喷涂层组织结构研究[J].铁道学报,2001(04):102.
[43] CHAKRAVARTY S;DYER J P;CONWAY J C.Influence of surface treatments on fretting fatigue of Ti-6242 at elevated temperatures[A].West Conshohocken:ASTM STP 1367,2000:491-505.
[44] A. King;A. Steuwer;C. Woodward;P.J. Withers .Effects of fatigue and fretting on residual stresses introduced by laser shock peening[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2006(1/2):12-18.
[45] MATTHEWIS A;HOLMBERG K;FRANKLIN S.A methodology for coating selection[A].Amsterdam:Elsevier Science,1993:422-439.
[46] HOEPPNER D W;GATES F L .Fretting fatigue consideration in engineering design[J].Wear,1981,70:155-164.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
作者相关
文章评分
  • 您的评分：
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%

版权所有©2010中国科学院金属研究所中国科技出版传媒股份有限公司

本系统由北京仁和汇智信息技术有限公司设计开发

技术支持：info@rhhz.net