通过激光熔化沉积工艺制备出TiCp(5wt％ )/Ti60复合材料薄壁材料,分析了材料的显微组织及600℃下的拉伸性能.结果表明,TiCp/Ti60复合材料熔化析出的TiC相呈断续链状,均匀分布于基体中,TiC与钛合金基体的界面结合良好,但是TiCP,/Ti60复合材料中存在少量未完全熔化的TiC颗粒.采用同轴输送球磨混合粉末的工艺可以很好地解决未熔TiC颗粒的难题.TiCp/Ti60复合材料在600℃下的最大抗拉强度为775MPa.TiCp/Ti60复合材料在600℃下的断口特征比较复杂,既有沿晶断裂和准解理断裂也有局部的韧性断裂.
参考文献
| [1] | Hsiung L M;Nieh T G .Microstructure and properties of powder metallurgy TiA1 alloys[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2004,364(1/2):1-10. |
| [2] | M.T. Jovanovic;B. Dimcic;I. Bobic .Microstructure and mechanical properties of precision cast TiAl turbocharger wheel[J].Journal of Materials Processing Technology,2005(1):14-21. |
| [3] | 傅恒志,丁宏升,陈瑞润,毕维生,王艳丽,白云峰,徐达鸣,苏彦庆,郭景杰.钛铝合金电磁冷坩埚定向凝固技术的研究[J].稀有金属材料与工程,2008(04):565-570. |
| [4] | WEIPING LIU;J. N. DuPONT .Fabrication of Carbide-Particle-Reinforced Titanium Aluminide-Matrix Composites by Laser-Engineered Net Shaping[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2004(3a):1133-1140. |
| [5] | Qu HP;Wang HM .Microstructure and mechanical properties of laser melting deposited gamma-TiAl intermetallic alloys[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2007(1-2):187-194. |
| [6] | A. Genc;R. Banerjee;D. Hill .Structure of TiB precipitates in laser deposited in situ, Ti-6Al-4V-TiB composites[J].Materials Letters,2006(7):859-863. |
| [7] | R. BANERJEE;A. GENC;D. HILL .Nanoscale TiB Precipitates in Laser Deposited Ti-Matrix Composites[J].Scripta materialia,2005(12):1433-1437. |
| [8] | F. Wang;J. Mei;H. Jiang .Laser fabrication of Ti6A14V/TiC composites using simultaneous powder and wire feed[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2007(0):461-466. |
| [9] | F. Wang;J. Mei;Xinhua Wu .Direct laser fabrication of Ti6Al4V/TiB[J].Journal of Materials Processing Technology,2008(1-3):321-326. |
| [10] | D. Liv;S.Q. Zhang;A Li;H.M. Wang .High temperature mechanical properties of a laser melting deposited TiC/TA15 titanium matrix composite[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2010(1/2):189-195. |
| [11] | D. Liu;S.Q. Zhang;A. Li;H.M. Wang .Creep rupture behaviors of a laser melting deposited TiC/TA15 in situ titanium matrix composite[J].Materials & design,2010(6):3127. |
| [12] | 周彦邦.钛合金铸造概论[M].北京:航空工业出版社,2000:56-61. |
| [13] | Boyer R;Collings E W;Welsch G.Materials Properties Handbook[M].Ohio:Materials Park,1994:337-354. |
| [14] | 黄伯云;李成功;石力开.中国材料工程大典(第4卷)有色金属材料工程[M].北京:化学工业出版社,2006:568-569. |
| [15] | Liu D;Zhang S Q;Li A;Wang H M .Microstructure and tensile properties of laser melting deposited TiC/TA15 titanium matrix composites[J].Journal of Alloys and Compounds,2009,485(1-2):156-162. |
| [16] | 石卫民,王青江,刘建荣,魏寿庸,李献民,王鼎春.Ti60高温钛合金环材组织与性能的研究[J].钛工业进展,2010(01):32-35. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%