采用无压浸渗方法成功制备了钛铜合金浸渗石墨基金属复合材料.浸渗温度控制在合金成分的熔点附近(1273～1373K),浸渗时间在5～20s,然后保温10min以充分浸渗.采用X射线衍射、扫描电镜和元素能谱分析等手段对该复合材料进行的研究表明,复合材料中由C,TiC,Cu和TiCu组成,浸渗组织呈均匀网状分布于石墨基体,浸渗相和石墨基体的界面处主要为TiC.对浸渗前后材料的密度、孔隙率和摩擦因数进行的比较研究表明采用该工艺进行的钛铜合金浸渗可填充石墨预制体82%的原有孔隙,浸渗效果良好;复合材料中界面处浸渗相显微硬度达到660(HV),具有较高硬度,使获得的石墨/合金复合材料摩擦因数降低1/3,改善了材料的耐磨性.
参考文献
| [1] | 马庆春.炭石墨材料浸渍改性的探讨[J].炭素,2004(02):16-20. |
| [2] | T.Etter;P.J.Uggowitzer;M.Papakyriacou;P.Schulz .Physical properties of graphite/aluminium composites produced by gas pressure infiltration method[J].Carbon: An International Journal Sponsored by the American Carbon Society,2003(5):1017-1024. |
| [3] | ETTER T .Strength and fracture thoughness of interpenetrating graphite/aluminium composites produced by the indirect squeeze casting process[J].Materials Science and Engineering,2004,38(06):62-64. |
| [4] | 池淑芬,刘强,吕洪全,赵吉存.炭石墨材料浸渍金属机理的探讨[J].炭素,2003(02):24-27,19. |
| [5] | MANTELL C H.Carbon and graphite hand book[M].New York:Interscience Publishers,1968 |
| [6] | Kaczmar J.W.;Pietrzak K. .The production and application of metal matrix composite materials[J].Journal of Materials Processing Technology,2000(1/3):58-67. |
| [7] | F.F.O.Orumwense;B.A.Okorie;E.O.Okeakpu .Sintered copper-graphite powder compacts for industrial applications[J].Powder Metallurgy,2001(1):62-66. |
| [8] | OKU T;KURUMADA A;SOGABE T et al.Effects of titanium impregnation on the thermal conductivity of carbon/copper composite materials[J].Journal of Nuclear Materials,1998,257(01):59-66. |
| [9] | DEVINCENT S M;MICHAL G M .Improvement of thermal and mechanical properties of graphite copper composites through interfacial modification[J].Journal of Materials Engineering and Performance,1993,2(03):323-331. |
| [10] | T.Etter;P.J.Uggowitzer;M.Papakyriacou;P.Schulz .Physical properties of graphite/aluminium composites produced by gas pressure infiltration method[J].Carbon: An International Journal Sponsored by the American Carbon Society,2003(5):1017-1024. |
| [11] | Rodriguez-Guerrero A;Sanchez SA;Narciso J;Louis E;Rodriguez-Reinoso F .Pressure infiltration of Al-12 wt.% Si-X (X = Cu, Ti, Mg) alloys into graphite particle preforms[J].Acta materialia,2006(7):1821-1831. |
| [12] | 冉丽萍,易茂中,王朝胜,杨琳,易振华.C/C-Cu复合材料的组织和摩擦磨损性能[J].中国有色金属学报,2007(04):530-535. |
| [13] | RAMBO C R .Synthesis of TiC/Ti-Cu composites by pressureless reactive infiltration of TiCu alloy into carbon performs fabricated by 3D-printing[J].Materials Letters,2005,59(8-9):1028-1031. |
| [14] | YANG L;SHEN P .Wetting of porous graphite by Cu-Ti alloys at 1373K[J].Materials Chemistry and Physics,2010,124(01):499-503. |
| [15] | 梁英教;车荫昌.无机物热力学数据手册[M].沈阳:东北大学出版社,1996 |
| [16] | R. Arroyave;T.W. Eagar;L. Kaufman .Thermodynamic assessment of the Cu-Ti-Zr system[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2003(1/2):158-170. |
| [17] | Y.H. Liang;H.Y. Wang;Y.F. Yang .Evolution process of the synthesis of TiC in the Cu-Ti-C system[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2008(2):298-303. |
| [18] | 胡锐,李海涛,薛祥义,李金山,寇宏超,常辉.Ti对C/Cu复合材料界面润湿及浸渗组织的影响[J].中国有色金属学报,2008(05):840-844. |
| [19] | 赵振国.界面化学基础[M].北京:化学工业出版社,1996 |
| [20] | 班永华,黄继华,张华,赵兴科,张志远.Cu-Ti-C反应复合.扩散连接Cf/SiC复合材料和TC4钛合金接头的组织结构[J].稀有金属材料与工程,2009(04):713-716. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%