通过定量金相方法系统研究了热等静压温度、时间、压力等工艺参量对ZTC4钛合金显微组织的影响规律.结果表明:相对于ZTC4钛合金原始铸态组织,经过热等静压处理后试样的β晶粒尺寸和α片层厚度均明显长大.随着热等静压温度的升高和保温时间的延长,β晶粒尺寸和α片层厚度分别增长了40~70μm和0.6~1μm,并且增长趋势呈近线性;而随着热等静压压力的增加,β晶粒尺寸和α片层厚度则呈现出先增加后减小的规律.相对原始铸态组织,热等静压处理后ZTC4钛合金组织β晶粒尺寸和α片层厚度分别增长12%~25%和57%~100%.
参考文献
[1] | CHRISTOPH LEYENS;MANFRED PERERS.Titanium and Titanium Alloys:Fundamentals and Applications[M].WILEYVCH:Verlag GmbH & Co,2003:8-12. |
[2] | 张喜燕;赵永庆;白晨光.钛合金及其应用[M].北京:化学工业出版社,2005:68-69. |
[3] | LUTIERING G .Influence of processing on microstructure and mechanical properties of (α+β) titanium alloys[J].Materials Science and Engineering,1998,243(01):32-45. |
[4] | XIAO Shu-long;CHEN Yu-yong;ZHU Hong-yan et al.Recent avances on precision casting of large thin wall complex castings of titanium alloys[J].Rare Metal Materials and Engineering,2006,35(05):678-681. |
[5] | SAMAROV;SELIVERSTOV.HIP modeling of complex shape parts:experience,trends and perspectives[A].Paris:European Powder Metallurgy Association,1994:771-774. |
[6] | HEBESUEN J C.HIP casting densification[A].New York:ASME,1999:125-138. |
[7] | 《中国航空材料手册》编辑委员会.中国航空材料手册第4卷:钛合金铜合金[M].北京:中国标准出版社,2001:193-202. |
[8] | Ulrike Habel;Brian J. McTiernan .HIP temperature and properties of a gas-atomized gamma-titanium aluminide alloy[J].Intermetallics,2004(1):63-68. |
[9] | JOVANOVIC M T;TADIC S;ZEC S .The effect of annealing temperatures and cooling rates on microstructure and mechanical properties of investment cast Ti-6A1-4V alloy[J].Materials & Design,2006,27(03):192-199. |
[10] | Gentzbittel JM.;Chu I.;Burlet H. .The effect of hot isostatic pressing parameters on microstructure and mechanical properties of Eurofer powder HIPed material[J].Journal of Nuclear Materials: Materials Aspects of Fission and Fusion,2002(Pt.a):540-543. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%