建立涡轮导向叶片三维实体模型,采用有限元软件ProCAST对DD6单晶高温合金导向叶片凝固过程温度场进行数值模拟；测试DD6单晶高温合金导向叶片不同位置凝固过程的温度变化.结果表明:数值模拟结果与实测结果偏差小于5％,吻合良好;导向叶片叶身的温度梯度大部分保持在25～45℃/cm范围内,缘板处温度梯度约为35℃/cm,导向叶片具有较大温度梯度,其等温线倾斜分布.
参考文献
| [1] | YU K O;OTI J A;ROBINSON M.Solidification modeling of complex-shaped single crystal turbine airfoils[A].Warrendale,PA:TMS,1992:135-144. |
| [2] | YU K O;BEFFEL M J;ROBINSON M et al.Solidification modeling of single crystal investment casting[J].Transactions of the American Foundrymen's Society,1990,98(53):417-428. |
| [3] | Jiarong LI,Shizhong LIU,Hailong YUAN,Zhengang ZHONG.Solidification Simulation of Investment Castings of Single Crystal Hollow Turbine Blade[J].材料科学技术学报（英文版）,2003(06):532-534. |
| [4] | Haipeng JIN,Jiarong LI,Dong PAN.Application of inverse method to estimation of boundary conditions during investment casting simulation[J].金属学报（英文版）,2009(06):429-434. |
| [5] | 金海鹏,李嘉荣,于静,刘世忠.采用正交设计优化单晶合金定向凝固数值模拟参数[J].稀有金属材料与工程,2010(05):767-770. |
| [6] | Jiarong LI,Shizhong LIU,Zhengang ZHONG.Solidification Simulation of Single Crystal Investment Castings[J].材料科学技术学报(英文版),2002(04):315-318. |
| [7] | 刘世忠;李嘉荣;钟振钢 等.第二代单晶高温合金空心涡轮叶片凝固过程数值模拟研究[J].材料科学与工艺,1999,7(增刊):136-138. |
| [8] | LI J R;ZHONG Z G;TANG D Z.A low-cost second generation single crystal superalloy DD6[A].Warrendale,PA:TMS,2000:777-778. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%