采用超声波辅助脉冲电沉积复合镀技术在铜基表面制备Ni-SiC纳米复合镀层.研究了超声波的施加和不同电极摆放方式对镀层显微组织和性能的影响.结果表明:超声波和第二相颗粒共同作用可以显著细化复合镀层显微组织,显微硬度可达到HV760；复合镀层镍衍射品面(200)和(220)峰位的变化,说明晶粒生长过程中的择优取向得到了抑制；在其他施镀条件相同时,与电极垂直摆放相比较,电极水平放置时复合镀层厚度减至为12.0μm,且显微硬度下降为HV343.分析原因是,电极水平摆放时第二相颗粒的自沉降作用覆盖阴极表面,阻碍镍的沉积,从而降低了复合镀层中SiC的含量.
参考文献
| [1] | 张艳丽,罗胜铁,刘大成.金属镍-碳化硅纳米复合电镀工艺研究[J].兵器材料科学与工程,2007(04):58-61. |
| [2] | Srivastava, M;Grips, VKW;Rajam, KS .Structure and properties of electrodeposited Ni-Co-YZA composite coatings[J].Journal of Applied Electrochemistry,2008(5):669-677. |
| [3] | Ewa Rudnik;Lidia Burzynska;Lukasz Dolasinski;Maciej Misiak .Electrodeposition of nickel/SiC composites in the presence of cetyltrimethylammonium bromide[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2010(24):7414-7420. |
| [4] | L. Benea;F. Wenger;P. Ponthiaux;J. P. Celis .Tribocorrosion behaviour of Ni-SiC nano-structured composite coatings obtained by electrodeposition[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2009(3/4):398-405. |
| [5] | P. Gyftou;E.A. Pavlatou;N. Spyrellis .Effect Of Pulse Electrodeposition Parameters On The Properties Of Ni/nano-sic Composites[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2008(18):5910-5916. |
| [6] | 李雪松,江中浩,吴化,王金波,杜立辉.脉冲电镀Ni-SiC纳米复合镀层工艺与微观形貌[J].金属热处理,2007(08):21-24. |
| [7] | F. Hu;K. C. Chan;J. E. Zhou .Effects of duty cycle on electrodeposition behaviour of Ni-SiC_p composite coatings[J].Surface Engineering,2008(3):204-208. |
| [8] | L.M. Chang;H.F. Guo;M.Z. An .Electrodeposition of Ni-Co/Al_2O_3 composite coating by pulse reverse method under ultrasonic condition[J].Materials Letters,2008(19):3313-3315. |
| [9] | 薛玉君,刘红彬,兰明明,库祥臣,李济顺.超声条件下脉冲电沉积Ni-CeO2纳米复合镀层的高温抗氧化性[J].中国有色金属学报,2010(08):1599-1604. |
| [10] | 张振华,郭忠诚.复合镀中纳米粉体分散的研究[J].精细与专用化学品,2007(02):9-13. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%