从喷涂方法、粉末特性和工艺参数三个方面介绍了金属陶瓷复合涂层制备、组织结构及综合性能的最新研究进展.同时认为这三个方面综合控制着热喷涂过程中陶瓷相的分解、氧化以及复合粉末的沉积行为,并由此对复合涂层的组织结构、力学性能和摩擦磨损性能具有重要影响.在此基础上,选择合适的喷涂方法和复合粉末,优化喷涂工艺是获得优良性能的金属陶瓷复合涂层的关键.
参考文献
[1] | STEHR G C H;VERSCHLEIBFESTER .Werkstoffe und beschichtungen fir verschleilbauteile in hochlei-stungs-formmaschinen[J].Mo Metalloberfl(a)che,2003,57(09):24-27. |
[2] | BERGER L M .Hardmetals as thermal spray coatings[J].Powder Metallurgy,2007,50(03):205-214. |
[3] | Giovanni Di Girolamo;Luciano Pilloni;Giovanni Pulci .Tribological Characterization of WC-Co Plasma Sprayed Coatings[J].Journal of the American Ceramic Society,2009(5):1118-1124. |
[4] | J. A. Picas;A. Forn;G. Matthaus .HVOF coatings as an alternative to hard chrome for pistons and valves[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2006(5/6):477-484. |
[5] | BERGER L M;ZIMMERMANN S;KELLER H.Microstructure and properties of HVOF-sprayed TiC-based coatings[A].Orlando,Florida,USA:ASM International,2003:793-799. |
[6] | Horlock AJ.;McCartney DG.;Shipway PH.;Wood JV. .Thermally sprayed Ni(Cr)-TiB2 coatings using powder produced by self-propagating high temperature synthesis: microstructure and abrasive wear behaviour[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(1/2):88-98. |
[7] | FINCKE J R;SWANK W D;HAGGARD D C.Comparison of the characteristics of HVOF and plasma thermal spray[A].Boston,Massachusetts,USA:ASM International,1994:325-330. |
[8] | DORFMAN M R;KUSHNER B A;NERZ J.A technical assessment of high velocity oxygen-fuel versus high energy plasma tungsten carbide-cobalt coatings for wear resistance[A].London,UK:ASM Internatioual,1989:108,1-108,12. |
[9] | MANTYLA T A;NIEMI K J;VUOR1STO P.Abrasion wear resistance of tungsten carbide coatings prepared by various thermal spraying techniques[A].Lucerne,Switzerland:Plasma Technik,1991:287-297. |
[10] | OTSUBO F;ERA H;UCHIDA T et al.Properties of Cr3C2 NiCr cermet coating sprayed by high power plasma and high velocity oxy-fuel processes[J].Journal of Thermal Spray Technology,2000,9(04):499-504. |
[11] | Chen H.;Hutchings IM. .Abrasive wear resistance of plasma-sprayed tungsten carbide cobalt coatings[J].Surface & Coatings Technology,1998(2/3):106-114. |
[12] | 鲍君峰,于月光,刘海飞,曾克里,任先京.三种热喷涂工艺制备WC/Co涂层性能比较[J].有色金属(冶炼部分),2006(04):46-49. |
[13] | MATTHEWS S J .Erosion-corrosion of Cr3 C2-NiCr high velocity thermal spray coatings[D].Auckland:The University of Auckland,2001. |
[14] | LIAO H;NORMAND B;CODDET C .Influence of coating microstructure on the abrasive wear resistance of WC/Co cermet coating[J].Surface and Coatings Technology,2000,124(2-3):235-242. |
[15] | WAYNE S F;SAMPATH S J .Structure/property relationships in sintered and thermally sprayed WC-Co[J].Journal of Thermal Spray Technology,1992,1(04):307-315. |
[16] | LI X M;YANG Y Y;SHAO T M .Impact wear performance of Cr3C2-NiCr coating by plasma and HVOF spraying[J].Wear,1997,202(02):208-214. |
[17] | Zorawski W;Kozerski S .Scuffing resistance of plasma and HVOF sprayed WC12Co and Cr3C2-25(Ni20Cr) coatings[J].Surface & Coatings Technology,2008(18):4453-4457. |
[18] | Wirojanupatump S.;McCartney DG.;Shipway PH. .The influence of HVOF powder feedstock characteristics on the abrasive wear behaviour of CrxCy-NiCr coatings[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2001(9):829-837. |
[19] | Huang, CB;Du, LZ;Zhang, WG .Preparation and characterization of atmospheric plasma-sprayed NiCr/Cr3C2-BaF2 center dot CaF2 composite coating[J].Surface & Coatings Technology,2009(20/21):3058-3065. |
[20] | 张长军,纪刚昌.Cr3C2-NiCr涂层磨料磨损行为[J].长安大学学报(自然科学版),2003(03):97-100. |
[21] | Li CJ.;Ji GC.;Wang YY.;Sonoya K. .Dominant effect of carbide rebounding on the carbon loss during high velocity oxy-fuel spraying of Cr3C2-NiCr[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,2002(1/2):137-143. |
[22] | K. H. Baik;J. H. Jang;S. Y. Hwang .Nanostructured WC-Co Coatings from Different Feedstock Powders[J].Materials Science Forum,2004(Pt.2):1293-1296. |
[23] | ATTERIDGE D G;DAVIS R;SCHOLL M et al.High energy plasma spray coating using micrometer-and nanometer-scale tungsten carbide-cobalt powder[J].Journal of Thermal Spray Technology,2001,10(01):153-155. |
[24] | Jianfeng Li;Chuanxian Ding .Improvement in the properties of plasma-sprayed chromium carbide coatings using nickel-clad powders[J].Surface & Coatings Technology,2000(1):15-19. |
[25] | LICJ;WANGYY;YANGGJ et al.Effect of solid carbide particle size on deposition behaviour,microstructure and wear performance of HVOF cermet coatings[J].Materials Science and Technology,2004,20(09):1087-1096. |
[26] | 李剑锋,黄静琪,丁传贤.等离子喷涂Cr3C2-NiCr及其表面化学镀Ni涂层的摩擦学特性[J].无机材料学报,2001(01):103-109. |
[27] | K.H. Baik;J.H. Kim;B.G. Seong .Improvements in hardness and wear resistance of thermally sprayed WC-Co nanocomposite coatings[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2007(1/2):846-849. |
[28] | USMANI S;SAMPATH S;HOUCK D L et al.Effect of carbide grain size on the sliding and abrasive wear behaviour of thermally sprayed WC-Co coatings[J].Tribology Transactions,1997,40(03):470-478. |
[29] | Qiaoqin Yang;Tetsuya Senda;Akira Ohmori .Effect of carbide grain size on microstructure and sliding wear behavior of HVOF-sprayed WC-12% Co coatings[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2003(1/2):23-34. |
[30] | Stewart D.A.;McCartney D.G.;Shipway P.H. .Abrasive wear behaviour of conventional and nanocomposite HVOF-sprayed WC-Co coatings[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,1999(2):789-798. |
[31] | 李长久.碳化钨颗粒尺寸对超音速火焰喷涂WC-Co涂层形成的影响[J].表面工程,1997(02):22. |
[32] | Qiao YF.;Fischer TE.;Dent A. .The effects of fuel chemistry and feedstock powder structure on the mechanical and tribological properties of HVOF thermal-sprayed WC-Co coatings with very fine structures[J].Surface & Coatings Technology,2003(1):24-41. |
[33] | Guilemany JM;Dosta S;Miguel JR .The enhancement of the properties of WC-CoHVOF coatings through the use of nanostructured and microstructured feedstock powders[J].Surface & Coatings Technology,2006(3/4):1180-1190. |
[34] | E. Sanchez;E. Bannier;M. D. Salvador;V. Bonache;J. C. Garcia;J. Morgiel;J. Grzonka .Microstructure and Wear Behavior of Conventional and Nanostructured Plasma-Sprayed WC-Co Coatings[J].Journal of Thermal Spray Technology,2010(5):964-974. |
[35] | Giovanni Di Girolamo;Luciano Pilloni;Giovanni Pulci .Tribological Characterization of WC-Co Plasma Sprayed Coatings[J].Journal of the American Ceramic Society,2009(5):1118-1124. |
[36] | CARTIER M;MCDONNELL L;CASHELL E M .Friction of tungsten carbide-cobalt coatings by means of plasma spraying[J].Surface and Coatings Technology,1991,48(03):241-248. |
[37] | W.Tillmann,E.Vogli,B.Krebs,A.Ferreira da Cunha,程江波,梁秀兵.大气等离子喷涂WC和Cr2C3基涂层[J].中国表面工程,2008(02):1-6. |
[38] | 范吉明,鲁玉祥,李春玲,李振.Cr_3C_2-NiCr涂层等离子喷涂工艺参数的优化[J].热加工工艺,2009(20):100-103. |
[39] | Verdon C.;Martin JL.;Karimi A. .A study of high velocity oxy-fuel thermally sprayed tungsten carbide based coatings. Part 1: Microstructures[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1998(1/2):11-24. |
[40] | MARPLE B R;VOYER J;BISSON J F et al.Thermal spraying of nanostructured cermet coating[J].Journal of Materials Processing,2001,117(03):418-423. |
[41] | Jianhong He;Julie M. Schoenung .Nanostructured coatings[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(1/2):274-319. |
[42] | 纪岗昌,王豫跃,李长久,圆田启嗣.基于正交回归实验设计方法的HVOF喷涂Cr3C2-NiCr涂层磨粒磨损性能的研究[J].兵器材料科学与工程,2001(02):12-15,29. |
[43] | 傅迎庆,郭学平,张立志,丁勇,高阳.爆炸喷涂工艺参数对WC-Co涂层结构和硬度的影响[J].大连海事大学学报,2004(04):60-62. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%