采用平板滑动摩擦实验研究不同接触压力下合金化热镀锌钢板的摩擦因数.结果表明:在相同的变形条件下,低强度基板加工硬化较强烈;在相同接触压力下,镀锌板基板强度越高,摩擦因数越低;随着接触压力增大,低强度镀锌板摩擦因数由0.154降为0.136,高强度镀锌板摩擦因数由0.140降至0.135;随着接触压力的进一步增加,摩擦因数降低的趋势变缓.基于黏着理论深入分析了基板强度影响摩擦因数的原因,得出如下结论:摩擦因数主要由α值(总的实际接触面积中模具和镀层直接接触部分百分比)和基板表面显微硬度决定;基板强度是决定基板表面显微硬度和α值的主要因素;随着接触压力增大,不同的加工硬化率会使不同强度基板的表面显微硬度逐渐接近,致使α差异减小,最终使基板强度对镀锌板摩擦因数影响减弱.
参考文献
[1] | 康永林.现代汽车板工艺及成形理论与技术[M].北京:冶金工业出版社,2009:342-346. |
[2] | NAKAJIMA S;KATAGIRI T;KATO C .Inorganic dry film lubricant coated galvannealed steel sheet with excellent press formability and adhesive compatibility[R].Kawasaki,2003. |
[3] | Erik D. Szakaly;John G. Lenard .The effect of process and material parameters on the coefficient of friction in the flat-die test[J].Journal of Materials Processing Technology,2010(6/7):868-876. |
[4] | MICHAL G M;PAIK D J.The effects of forming velocity and strain path on the performance of galvannealed sheet steels[A].Brussels:Centre de Recherches Métallurgiques,2001:73-80. |
[5] | ABOTANI K;HIROHATA K;KIYASU T .Hot-dip galvanized sheet steel with excellent press formability and surface quality for the auto motive panels[R].Kawasaki,2003. |
[6] | B.H. Lee;Y.T. Keum;R.H. Wagoner .Modeling of the friction caused by lubrication and surface roughness in sheet metal forming[J].Journal of Materials Processing Technology,2002(0):60-63. |
[7] | H.Y. Gong;Z.L. Lou;Z.L. Zhang .Studies on the friction and lubrication characteristics in the sheet steel drawing process[J].Journal of Materials Processing Technology,2004(1/3):328-333. |
[8] | Matuszak A.; .Factors influencing friction in steel sheet forming[J].Journal of Materials Processing Technology,2000(1/3):250-253. |
[9] | A. Yanagida;A. Azushima .Evaluation of coefficients of friction in hot stamping by hot flat drawing test[J].CIRP Annals,2009(1 CD/ROM):247-250. |
[10] | L. G. Garza;C. J. Van Tyne .Friction and formability of galvannealed interstitial free sheet steel[J].Journal of Materials Processing Technology,2007(0):164-168. |
[11] | 张理扬,左良,李俊,俞宁峰,季思凯.汽车用合金化热镀锌IF钢表面摩擦系数[J].特殊钢,2005(04):9-12. |
[12] | 刘正林.摩擦学原理[M].北京:高等教育出版社,2009:158-160. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%