鉴于双辊薄带连铸等轴晶区半固态铸轧组织对产品性能的重要性,应用Procast软件中的CA-FE方法对工业纯铝在水冷钢辊连续铸轧中的凝固过程进行了模拟,建立了宏观温度场、浓度场和微观生长过程耦合的凝固组织模拟模型.以CA(Cellular Automaton)模型为基础,建立了晶粒生长过程的局部演变规则,在晶粒尺度上模拟了其凝固过程.应用建立的微观组织模型,研究了工艺参数对凝固组织的影响.模拟结果与实验结果基本吻合,检验了模型的正确性与适用条件.
参考文献
| [1] | 张纬栋,任三兵,杜锋,王波,张立,樊俊飞,张捷宇.双辊薄带连铸布流系统的数理模拟[J].过程工程学报,2010(z1):256-259. |
| [2] | 王波,张捷宇,张胤,贺友多,樊俊飞,方园,安胜利.双辊薄带连铸过程数学物理模拟研究[J].内蒙古科技大学学报,2008(01):67-72. |
| [3] | Yuan Fang,Zhen-min Wang,Qing-xiang Yang,Yun-kun Zhang,Li-gang Liu,Hong-yan Hu,Yue Zhang.Numerical simulation of the temperature fields of stainless steel with different roller parameters during twin-roll strip casting[J].矿物冶金与材料学报,2009(03):304-308. |
| [4] | Hu Zhao;Peijie Li;Liangju He .Coupled analysis of temperature and flow during twin-roll casting of magnesium alloy strip[J].Journal of Materials Processing Technology,2011(6):1197-1202. |
| [5] | M.C.Flemings;R.W.Cahn .Organization and trends in materials science and engineering education in the us and Europe[J].Acta materialia,2000(1):371-383. |
| [6] | W.J.Boettinger;S.R.Coriell .Solidification microstructures: recent developments, future directions[J].Acta materialia,2000(1):43-70. |
| [7] | 许庆彦,冯伟明,柳百成,熊守美.铝合金枝晶生长的数值模拟[J].金属学报,2002(08):799-803. |
| [8] | GANDIN C A;RAPPAZ M .A coupled finite element-celluar automaton model for the prediction of dentritic grain structures in solidification processes[J].Acta Materialia,1994,42(07):2233-2246. |
| [9] | 杨明波,潘复生,彭晓东,侯仕东,丁培道.双辊薄带凝固组织的数值模拟（Ⅰ）--数学模型的建立及验证[J].钢铁研究学报,2001(04):19-24. |
| [10] | 杨明波,潘复生,彭晓东,丁培道.双辊薄带凝固过程的宏观-微观耦合数学模型[J].重庆大学学报（自然科学版）,2005(05):39-44. |
| [11] | 湛利华,李晓谦,唐朝阳,钟掘.铝带坯连续铸轧过程热力耦合有限元分析[J].中国机械工程,2005(11):979-984,996. |
| [12] | 刘永刚,陈军,潘冶,孙国雄,仇春荔.Al-4.5%Cu合金凝固过程显微组织的数值模拟[J].中国有色金属学报,2002(06):1130-1135. |
| [13] | RAPPAZ M.Probabolic modelling of microstructure formation in solidification process[J].Acta Metallurgica Et Materialia,1993(02):345-360. |
| [14] | FLOOD S C;HUNT J D .Columnar and equiaxed growth:I-A model of a columnar front with a temperature dependent velocity[J].Journal of Crystal Growth,1987,82(03):543-551. |
| [15] | FLOODS C;HUNT J D .Columnar and equiaxed growth:Ⅱ-Equiaxed growth ahead of a columnar front[J].Journal of Crystal Growth,1987,82(03):552-560. |
| [16] | Wang, B.;Zhang, J.Y.;Li, X.M.;Qi, W.H. .Simulation of solidification microstructure in twin-roll casting strip[J].Computational Materials Science,2010(Suppl.1):S135-S139. |
| [17] | 王祝堂;田荣璋.铝合金及其加工手册[M].长沙:中南工业大学出版社,1989 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%