本文综述了聚醚醚酮(Polyetheretherketone,PEEK)的特性及其应用,重点探讨了PEEK复合改性中的无机填料填充、纤维增强、聚合物共混及表面改性四个方面对PEEK复合材料性能的影响,简述了PEEK复合材料在航空航天领域、汽车工业及涂料工业中的应用研究进展,并指出PEEK改性过程中纳米材料的团聚以及无机有机物的相容性仍是目前亟待解决的重要问题,寻求更多的增强体和简便复合工艺以实现材料更优性价比是今后的研究重点.
参考文献
[1] | G.Y. Xie;G.X. Sui;R. Yang .Effects of potassium titanate whiskers and carbon fibers on the wear behavior of polyetheretherketone composite under water lubricated condition[J].Composites science and technology,2011(6):828-835. |
[2] | 田爱国,郭强.聚醚醚酮及其复合材料的特性与应用研究进展[J].工程塑料应用,2002(02):47-49. |
[3] | 郭强;田爱国;罗唯力 .PEEK在气体压缩机阀片上的应用研究[J].上海化工,1997,22(06):12-16. |
[4] | 付国太,刘洪军,张柏,韩光鹤.PEEK的特性及应用[J].工程塑料应用,2006(10):69-71. |
[5] | 王喜梅,齐贵亮,蔡江涛,张玉龙.PEEK改性研究进展[J].工程塑料应用,2009(02):80-83. |
[6] | 刘焕彬;陈小泉.纳米科学与技术导论[M].北京:化学工业出版社,2006 |
[7] | KELSALL ROBERT;HAMLEY IAN;GERGHENGAN MARK.纳米科学与技术[M].北京:科学出版社,2007 |
[8] | Kuo MC;Tsai CM;Huang JC;Chen M .PEEK composites reinforced by nano-sized SiO2 and Al2O3 particulates[J].Materials Chemistry and Physics,2005(1):185-195. |
[9] | Christian J. Schwartz;Shyam Bahadur .Studies on the tribological behavior and transfer film-counterface bond strength for polyphenylene sulfide filled with nanoscale alumina[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2000(2):261-273. |
[10] | YU LAIGUI .Action of Transfer Film in Improving Friction and Wear Behaviors of Iron- and Copper-Filled Poly(ether ether ketone) Composites[J].Journal of Applied Polymer Science,2000(2):179-184. |
[11] | 彭旭东,马红玉,雷毅.纳米Al2O3和聚四氟乙烯填充聚醚醚酮基复合材料摩擦学特性研究[J].石油大学学报(自然科学版),2004(02):68-70,74. |
[12] | 王齐华;薛群基;沈维长 .纳米SiC和微米SiC填充聚醚醚酮的磨损机理研究[J].功能材料,1999,29(05):558-560. |
[13] | 刘玲玲 .颗粒填充聚醚醚酮复合材料的生物摩擦学性能研究[D].南京理工大学,2006. |
[14] | Hong-Bin Qiao;Qiang Guo;Ai-Guo Tian;Guo-Liang Pan;Le-Bo Xu .A study on friction and wear characteristics of nanometer Al{sub}2O{sub}3/PEEK composites under the dry sliding condition[J].Tribology International,2007(1):105-110. |
[15] | FLOCK J;FRIEDRICH K;YUAN Q .On the friction and wear behavior of PAN and pitch-carbon fiber reinforced PEEK composites[J].Wear,1999,225-229(04):304-311. |
[16] | DAVIM J P;CARDOSO R .Effect of the reinforcement (carbon or glass fibres) on friction and wear behaviour of the PEEK against steel surface at a long dry sliding[J].Wear,2009,266(7-8):795-799. |
[17] | Z. Zhang;C. Breidt;L. Chang;K. Friedrich .Wear of PEEK composites related to their mechanical performances[J].Tribology International,2004(3):271-277. |
[18] | BIJWE J;NIDHI .Potential of fibres and solid lubricants to en hance the tribo-utility of PEEK in adverse operating conditions[J].Industrial Lubrication Tribology,2007,59(04):156-165. |
[19] | 贾均红,陈建敏,周惠娣,张定军,顾玉寰.炭纤维增强聚醚醚酮复合材料在水润滑下的摩擦学行为[J].高分子材料科学与工程,2005(02):208-212. |
[20] | HANCHI J;EISS Jr N S .Dry sliding friction and wear of short carbon-fiber-reinforced polyetheretherketone (PEEK) at elevated temperatures[J].Wear,1997,203-204(03):380-386. |
[21] | Xu LiuJie;J. Paulo Davim;Rosaria Cardoso .Prediction on tribological behaviour of composite PEEK-CF30 using artificial neural networks[J].Journal of Materials Processing Technology,2007(1/3):374-378. |
[22] | 李志方 .碳酸钙晶须增强PEEK复合材料的摩擦学性能研究[D].福州:福州大学,2005. |
[23] | 李恩重,徐滨士,王海斗,郭伟玲.玻璃纤维增强PEEK复合材料的高速干摩擦性能[J].工程塑料应用,2012(05):62-65. |
[24] | Jayashree Bijwe;Sukanta Sen;Anup Ghosh .Influence of PTFE content in PEEK-PTFE blends on mechanical properties and tribo-performance in various wear modes[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2005(10):1536-1542. |
[25] | Yuji Yamamoto;Masaaki Hashimoto .Friction and wear of water lubricated PEEK and PPS sliding contacts Part 2. Composites with carbon or glass fibre[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2004(1/2):181-189. |
[26] | 颜红侠,宁荣昌,黄英.PEEK复合材料的性能研究[J].塑料工业,2002(04):44-45. |
[27] | 龙春光,吴茵,华熳煜,戴春霞.不同载荷下Ekonol/G/MoS2/PEEK复合材料的摩擦学性能[J].机械工程材料,2005(07):53-55. |
[28] | 赵纯;张玉龙.聚醚醚酮[M].北京:化学工业出版社,2008 |
[29] | LAURENSA P;SADRASA B;DECOBERTB F et al.Enhancement of the adhesive bonding properties of PEEK by excimer laser treatment[J].International Journal of Adhesion and Adhesives,1998,18(01):19-27. |
[30] | CHANTAL G LAMONTAGNEA;GERALD N MANUELPILLAIA;EMMA A TAYLORB et al.Normal and oblique hypervelocity impacts on carbon fibre/PEEK composites[J].International Journal of Impact Engineering,1999,23(01):519-532. |
[31] | 陈亚莉.高性能热塑性复合材料在飞机上的应用[J].航空维修与工程,2003(3):28-30. |
[32] | 张人佶,冯显灿.聚醚醚酮及其复合材料的摩擦学研究进展[J].材料研究学报,2002(01):1-8. |
[33] | SBB Tech选择VICTREX@PEEK@聚合物制造机器人减速装置[J].电子工业专用设备,2009,179(12):55. |
[34] | SKF用VICTREX(R) PEEK(R)聚合材料制造出高性能汽车滚动轴承保持架[J].国外塑料,2008(03):77. |
[35] | 林有希,高诚辉.汽车用聚醚醚酮复合材料研究[J].汽车技术,2005(12):37-40. |
[36] | 唐磊,何杰.改性聚醚醚酮复合材料在齿轮上的应用[J].工程塑料应用,2002(05):24-26. |
[37] | 李玉芳,伍小明.特种工程塑料聚醚醚酮的生产应用及发展前景[J].化学推进剂与高分子材料,2005(03):7-11. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%