鉴于目前冷喷涂技术制备复合材料涂层受到国内外越来越多学者的关注,本文在大量文献分析的基础上对冷喷涂制备复合材料涂层进行了分类和总结.首先,探讨了喷涂前粉末准备和喷涂工艺参数对复合材料涂层的影响;其次,归纳了冷喷涂制备的金属-金属、金属-陶瓷、金属-金属间化合物以及纳米复合材料涂层等研究成果;最后,分析了冷喷涂制备复合材料涂层的应用前景和当前存在的主要问题.
参考文献
| [1] | Anatolii Papyrin .COLD SPRAY TECHNOLOGY[J].Advanced Materials & Processes,2001(9):49-51. |
| [2] | ALKIMOV A P;KOSAREV V F;PAPYRIN A N .A method of cold gas dynamic deposition[J].Dold Akad Nauk SSSR,1990,315(05):1062-1065. |
| [3] | LI C J;LI W Y .Optimal design of a novel cold spray gun nozzle at a limited space[J].Journal of Thermal Spray Technology,2005,14(03):391-395. |
| [4] | Wen-Ya Li;Hanlin Liao;G. Douchy .Optimal design of a cold spray nozzle by numerical analysis of particle velocity and experimental validation with 316L stainless steel powder[J].Materials & Design,2007(7):2129-2137. |
| [5] | Klinkov SV;Kosarev VF;Sova AA;Smurov I .Deposition of multicomponent coatings by Cold Spray[J].Surface & Coatings Technology,2008(24):5858-5862. |
| [6] | MIL-STD-3021.Department of defense manufacturing process standard materials deposition of cold spray[S]. |
| [7] | Wang HT;Li CJ;Yang GJ;Li CX .Effect of heat treatment on the microstructure and property of cold-sprayed nanostructured FeAl/Al2O3 intermetallic composite coating[J].Vacuum: Technology Applications & Ion Physics: The International Journal & Abstracting Service for Vacuum Science & Technology,2008(1):146-152. |
| [8] | Xiao-Tao Luo;Guan-Jun Yang;Chang-Jiu Li .High strain rate induced localized amorphization in cubic BN/NiCrAl nanocomposite through high velocity impact[J].Scripta materialia,2011(7):581-584. |
| [9] | Phani PS;Vishnukanthan V;Sundararajan G .Effect of heat treatment on properties of cold sprayed nanocrystalline copper alumina coatings[J].Acta materialia,2007(14):4741-4751. |
| [10] | 黄春杰,李文亚,余敏,廖汉林.冷喷涂制备颗粒增强钛基复合材料涂层研究[J].材料工程,2013(04):1-5,11. |
| [11] | Lima RS.;Karthikeyan J.;Kay CM.;Lindemann J.;Berndt CC. .Microstructural characteristics of cold-sprayed nanostructured WC-Co coatings[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,2002(1/2):129-135. |
| [12] | STOLTENHOFF T;KREYE H;RICHTER H J .An analysis of the cold spray process and its coatings[J].Journal of Thermal Spray Technology,2002,11(04):542-550. |
| [13] | Gary L. Eesley;Alaa Elmoursi;Nilesh Patel .Thermal properties of kinetic spray Al-SiC metal-matrix composite[J].Journal of Materials Research,2003(4):855-860. |
| [14] | LI W Y;ZHANG G;LIAO H et al.Characterizations of cold sprayed TiN particle reinforced Al2319 composite coating[J].Journal of Materials Processing Technology,2008,202(1-3):508-513. |
| [15] | X.L Zhou;S.J. Mou;X.K. Wu;J.S. Zhang .Deposition behavior of mixed binary metallic powders in cold spraying process[J].Applied Surface Science,2011(24):10628-10633. |
| [16] | T. S. Price;P. H. Shipway;D. G. McCartney;E. Calla;D. Zhang .A Method for Characterizing the Degree of Inter-particle Bond Formation in Cold Sprayed Coatings[J].Journal of Thermal Spray Technology,2007(4):566-570. |
| [17] | Wang, Q.;Spencer, K.;Birbilis, N.;Zhang, M.-X. .The influence of ceramic particles on bond strength of cold spray composite coatings on AZ91 alloy substrate[J].Surface & Coatings Technology,2010(1):50-56. |
| [18] | Yongshan Tao;Tianying Xiong;Chao Sun;Huazi Jin;Hao Du;Tiefan Li .Effect of α-Al_2O_3 on the properties of cold sprayed Al/α-Al_2O_3 composite coatings on AZ91D magnesium alloy[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2009(1):261. |
| [19] | T. Novoselova;S. Celotto;R. Morgan .Formation of TiAl intermetallics by heat treatment of cold-sprayed precursor deposits[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2007(1/2):69-77. |
| [20] | Yu, M.;Li, W.-Y.;Suo, X.K.;Liao, H.L..Effects of gas temperature and ceramic particle content on microstructure and microhardness of cold sprayed SiC_p/Al 5056 composite coatings[J].Surface & Coatings Technology,2013:102-106. |
| [21] | POIRIER D;LEGOUX J G;DREW R A L et al.Consolidation of Al2O3/A1 nanocomposite powder by cold spray[J].Journal of Thermal Spray Technology,2011,20(1-2):275-284. |
| [22] | Hong-Tao Wang;Chang-Jiu Li;Guan-Jun Yang;Cheng-Xing Li .Cold Spraying Of Fe/al Powder Mixture: Coating Characteristics And Influence Of Heat Treatment On The Phase Structure[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2008(5P1):2538-2544. |
| [23] | Cho, S.;Takagi, K.;Kwon, H.;Seo, D.;Ogawa, K.;Kikuchi, K.;Kawasaki, A. .Multi-walled carbon nanotube-reinforced copper nanocomposite coating fabricated by low-pressure cold spray process[J].Surface & Coatings Technology,2012(16):3488-3494. |
| [24] | S. Tria;O. Eikedim;W.Y. Li .Ball milled Ni-Ti powder deposited by cold spraying[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2009(1/2):334-336. |
| [25] | W.-Y. Li;G. Zhang;C. Zhang;O. Elkedim;H. Liao;C. Coddet .Effect of Ball Milling of Feedstock Powder on Microstructure and Properties of TiN Particle-Reinforced Al Alloy-Based Composites Fabricated by Cold Spraying[J].Journal of Thermal Spray Technology,2008(3):316-322. |
| [26] | Li WY;Zhang C;Liao HL;Li JL;Coddet C .Characterizations of cold-sprayed Nickel-Alumina composite coating with relatively large Nickel-coated Alumina powder[J].Surface & Coatings Technology,2008(19):4855-4860. |
| [27] | Bakshi SR;Singh V;Balani K;McCartney DG;Seal S;Agarwal A .Carbon nanotube reinforced aluminum composite coating via cold spraying[J].Surface & Coatings Technology,2008(21):5162-5169. |
| [28] | C. Feng;V. Guipont;M. Jeandin;O. Amsellem;F. Pauchet;R. Saenger;S. Bucher;C. Iacob .B_4C/Ni Composite Coatings Prepared by Cold Spray of Blended or CVD-Coated Powders[J].Journal of Thermal Spray Technology,2012(3/4):561-570. |
| [29] | Brian S. DeForce;Timothy J. Eden;John K. Potter .Cold Spray Al-5% Mg Coatings for the Corrosion Protection of Magnesium Alloys[J].Journal of Thermal Spray Technology,2011(6):1352-1358. |
| [30] | J.S. Kim;Y.S. Kwon;O.I. Lomovsky .Cold spraying of in situ produced TiB_2-Cu nanocomposite powders[J].Composites science and technology,2007(11/12):2292-2296. |
| [31] | P. Richer;B. Jodoin;L. Ajdelsztajn;E. J. Lavernia .Substrate Roughness and Thickness Effects on Cold Spray Nanocrystalline Al-Mg Coatings[J].Journal of Thermal Spray Technology,2006(2):246-254. |
| [32] | Hyun-Ki Kang;Suk Bong Kang .Tungsten/copper composite deposits produced by a cold spray[J].Scripta materialia,2003(12):1169-1174. |
| [33] | 高培虎,杨冠军,李毅功,李长久.粉末结构对冷喷涂纳米结构WC-Co沉积行为的影响[J].中国表面工程,2009(05):56-61. |
| [34] | Chang-Jiu Li;Guan-Jun Yang;Pei-Hu Gao;Jian Ma;Yu-Yue Wang;Cheng-Xin Li .Characterization of Nanostructured WC-Co Deposited by Cold Spraying[J].Journal of Thermal Spray Technology,2007(5/6):1011-1020. |
| [35] | Kim HJ;Lee CH;Hwang SY .Fabrication of WC-Co coatings by cold spray deposition[J].Surface & Coatings Technology,2005(2/3):335-340. |
| [36] | KIM H J;LEE C H;HWANG S Y .Superhard nano WC-12%Co coating by cold spray deposition[J].Mat Sci Eng:A,2005,391(1-2):243-248. |
| [37] | Shin S;Yoon S;Kim Y;Lee C .Effect of particle parameters on the deposition characteristics of a hard/soft-particles composite in kinetic spraying[J].Surface & Coatings Technology,2006(6):3457-3461. |
| [38] | S. V. Klinkov;V. F. Kosarev;A. A. Sova;I. Smurov .Calculation of Particle Parameters for Cold Spraying of Metal-Ceramic Mixtures[J].Journal of Thermal Spray Technology,2009(5/6):944-956. |
| [39] | Yu, M.;Li, W.-Y.;Wang, F.F.;Suo, X.K.;Liao, H.L..Effect of particle and substrate preheating on particle deformation behavior in cold spraying[J].Surface & Coatings Technology,2013:174-178. |
| [40] | Shin, SM;Xiong, YM;Ji, YW;Kim, HJ;Lee, CH .The influence of process parameters on deposition characteristics of a soft/hard composite coating in kinetic spray process[J].Applied Surface Science,2008(8):2269-2275. |
| [41] | Zhao ZB;Gillispie BA;Smith JR .Coating deposition by the kinetic spray process[J].Surface & Coatings Technology,2006(16/17):4746-4754. |
| [42] | 李海祥,李相波,孙明先,王洪仁,黄国胜.冷喷涂Zn-50Al复合涂层在海水中的耐蚀性能[J].中国腐蚀与防护学报,2010(01):62-66. |
| [43] | KOIVULUOTO H;LAGERBOM J;VUORISTO P .Microstructural studies of cold sprayed copper,nickel,and nickel-30%copper coatings[J].Journal of Thermal Spray Technology,2007,16(04):488-497. |
| [44] | 李海祥,孙明先,李相波,王洪仁,黄国胜.冷喷涂65%Zn-Al复合涂层的沉积特性[J].中国有色金属学报,2010(07):1353-1359. |
| [45] | Lee HY;Jung SH;Lee SY;Ko KH .Alloying of cold-sprayed Al-Ni composite coatings by post-annealing[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2007(7):3496-3502. |
| [46] | Lee HY;Jung SH;Lee SY;Ko KH .Fabrication of cold sprayed Al-intermetallic compounds coatings by post annealing[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2006(1-2):139-143. |
| [47] | Spencer, K;Zhang, MX .The use of kinetic metallization to form intermetallic reinforced composite coatings by post-spray heat treatment[J].Surface & Coatings Technology,2009(20/21):3019-3025. |
| [48] | Xiang-kun Wu;Xiang-lin Zhou;Hua Cui;Xiong Zheng;Ji-shan Zhang .Deposition Behavior and Characteristics of Cold-Sprayed Cu-Cr Composite Deposits[J].Journal of Thermal Spray Technology,2012(5):792-799. |
| [49] | G. Rolland;P. Sallamand;V. Guipont;M. Jeandin;E. Boller;C. Bourda .Damage Study of Cold-Sprayed Composite Materials for Application to Electrical Contacts[J].Journal of Thermal Spray Technology,2012(5):758-772. |
| [50] | J.F. Li;P.A. Agyakwa;C.M. Johnson;D. Zhang;T. Hussain;D.G. McCartney .Characterization and solderability of cold sprayed Sn–Cu coatings on Al and Cu substrates[J].Surface & Coatings Technology,2010(9/10):1395-1404. |
| [51] | 周勇,杨冠军,王洪铎,李耿,李长久.热处理对机械合金化Ni/Ti冷喷涂层金属间化合物形成的影响[J].焊接学报,2010(08):45-48. |
| [52] | Novoselova T;Fox P;Morgan R;O'Neill W .Experimental study of titanium/aluminium deposits produced by cold gas dynamic spray[J].Surface & Coatings Technology,2006(8):2775-2783. |
| [53] | IRISSOU E;LEGOUX J G;ARSENAULT B et al.Investigation of Al-Al2O3 cold spray coating formation and properties[J].Journal of Thermal Spray Technology,2007,16(5-6):661-668. |
| [54] | Hodder, K.J.;Izadi, H.;McDonald, A.G.;Gerlich, A.P..Fabrication of aluminum-alumina metal matrix composites via cold gas dynamic spraying at low pressure followed by friction stir processing[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2012:114-121. |
| [55] | Wen-Ya Li;Ga Zhang;Xueping Guo;Hanlin Liao;Christian Coddet .Characterizations of Cold-sprayed TiN Particle-reinforced Al Alloy-based Composites - from Structures to Tribological Behaviour[J].Advanced Engineering Materials,2007(7):577-583. |
| [56] | Bu, H.;Yandouzi, M.;Lu, C.;MacDonald, D.;Jodoin, B..Cold spray blended Al+Mg _(17)Al _(12) coating for corrosion protection of AZ91D magnesium alloy[J].Surface & Coatings Technology,2012:155-162. |
| [57] | Spencer, K;Fabijanic, DM;Zhang, MX .The use of Al-Al2O3 cold spray coatings to improve the surface properties of magnesium alloys[J].Surface & Coatings Technology,2009(3):336-344. |
| [58] | Yandouzi, M;Richer, P;Jodoin, B .SiC particulate reinforced Al-12Si alloy composite coatings produced by the pulsed gas dynamic spray process: Microstructure and properties[J].Surface & Coatings Technology,2009(20/21):3260-3270. |
| [59] | Sansoucy E;Marcoux P;Ajdelsztajn L;Jodoin B .Properties of SiC-reinforced aluminum alloy coatings produced by the cold gas dynamic spraying process[J].Surface & Coatings Technology,2008(16):3988-3996. |
| [60] | LI C J;SUO X K;YANG G J et al.Influence of annealing on the microstructure and wear performance of diamond/NiCrA1 composite coating deposited through cold spraying[J].Materials Science Forum,2010,638-642:894-899. |
| [61] | Miguel, J.M.;Guilemany, J.M.;Dosta, S. .Effect of the spraying process on the microstructure and tribological properties of bronze-alumina composite coatings[J].Surface & Coatings Technology,2010(7):2184-2190. |
| [62] | H.X. Hu;S.L Jiang;Y.S. Tao;T.Y. Xiong;Y.G. Zheng .Cavitation erosion and jet impingement erosion mechanism of cold sprayed Ni-Al_2O_3 coating[J].Nuclear engineering and design,2011(12):4929-4937. |
| [63] | VanSteenkiste TH;Elmoursi A;Gorkiewicz D;Gillispie B .Fracture study of aluminum composite coatings produced by the kinetic spray method[J].Surface & Coatings Technology,2005(1):103-110. |
| [64] | A. Shkodkin;A. Kashirin;O. Klyuev;T. Buzdygar .Metal Particle Deposition Stimulation by Surface Abrasive Treatment in Gas Dynamic Spraying[J].Journal of Thermal Spray Technology,2006(3):382-386. |
| [65] | Spencer, K.;Fabijanic, D.M.;Zhang, M.-X. .The influence of Al _2O _3 reinforcement on the properties of stainless steel cold spray coatings[J].Surface & Coatings Technology,2012(14):3275-3282. |
| [66] | Wen-Ya Li;Changlin Yang;Hanlin Liao .Effect of vacuum heat treatment on microstructure and microhardness of cold-sprayed TiN particle-reinforced Al alloy-based composites[J].Materials & design,2011(1):388-394. |
| [67] | V.C. Srivastava;A. Schneider;V. Uhlenwinkel;K. Bauckhage .Spray processing of 2014-Al + SiCp composites and their property evaluation[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2005(1/2):19-26. |
| [68] | 刘卫,余敏,李文亚.真空热处理对冷喷涂Ni-Al2O3复合涂层组织与显微硬度的影响[J].热加工工艺,2010(24):196-198,203. |
| [69] | 所新坤,杨冠军,李长久.镍基金刚石复合涂层的冷喷涂制备[J].材料研究与应用,2009(01):32-36. |
| [70] | 肖正涛,李相波,王佳,黄国胜,周雄.热处理对冷喷涂Cu-20％Al2O3复合涂层耐磨损性能的影响研究[J].材料导报,2012(06):76-80. |
| [71] | 王锋,漆波,陈清华,崔文智,李隆键,梁大镁.超音速冷喷涂Cu-Al2O3复合涂层特性[J].材料导报,2009(12):47-50. |
| [72] | Hyuntaek Na;Gyuyeol Bae;Sumin Shin;S. Kumar;Hyungjun Kim;Changhee Lee .Advanced Deposition Characteristics Of Kinetic Sprayed Bronze/diamond Composite By Tailoring Feedstock Properties[J].Composites science and technology,2009(3/4):463-468. |
| [73] | X. Zhou;Pravansu Mohanty.Electrochemical behavior of cold sprayed hydroxyapatite/titanium composite in Hanks' solution[J].Electrochimica Acta,2012:134-140. |
| [74] | Morimoto J;Onoda T;Sasaki Y;Abe N .Improvement of solid cold sprayed TiO2-Zn coating with direct diode laser[J].Vacuum: Technology Applications & Ion Physics: The International Journal & Abstracting Service for Vacuum Science & Technology,2004(3/4):527-532. |
| [75] | Cherigui M;Li W;Hamzaoui R;Ji V;Fenineche N;Coddet C .Microstructure and magnetic properties of FeSiBNbCu-Al cold spray coatings[J].The European physical journal. Applied physics,2008(1):79-86. |
| [76] | T. Van Steenkiste .Kinetic Sprayed Rare Earth Iron Alloy Composite Coatings[J].Journal of Thermal Spray Technology,2006(4):501-506. |
| [77] | DOSTA S;COUTO M;GUILEMANY J M .Cold spray deposi tion of a WC-25Co cermet onto Al7075-T6 and carbon steel substrates[J].Acta Materialia,2013,61(02):643-652. |
| [78] | WATANABE M;KOMATSU M;KURODA S et al.WC-Co/Al multilayer coatings by warm spray deposition[J].Journal of Thermal Spray Technology,2012,21(3-4):597-560. |
| [79] | Yandouzi M;Sansoucy E;Ajdelsztajn L;Jodoin B .WC-based cermet coatings produced by cold gas dynamic and pulsed gas dynamic spraying processes[J].Surface & Coatings Technology,2007(2):382-390. |
| [80] | 陈利修,陈铭.冷喷涂Cu-Zn-Al2O3修复斯太尔发动机水道腐蚀区域的涂层性能分析[J].机械设计与研究,2013(01):69-74. |
| [81] | 张建设.美空军研究冷喷涂技术维修UH-60直升机[J].表面工程资讯,2012(01):18. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%