Ti-Al系金属间化合物、陶瓷和陶瓷基复合材料这两大类轻质高温结构材料在航空、航天领域具有很好的应用前景,本文在分析大量文献的基础上,评述了国内外焊接技术主要研究进展,包括材料的可焊性研究进展、不同焊接方法和不同材料组合焊接接头对应的性能以及焊接技术应用研究进展,指出耐高温焊接材料的研制、两大类轻质高温结构材料与异种材料组合的连接技术以及实际焊接接头的考核应用研究应该是今后本领域的重点研究方向.
参考文献
[1] | DAVID S A;HORTON J A;GOODWIN G M et al.Weldability and microstructure of a titanium aluminide[J].Welding Journal,1990,69(04):133-140. |
[2] | BAESLACK Ⅲ W A;BRODERICK T .Effect of cooling rate on the structure and hardness of a Ti-26Al-10Nb-3V-1Mo titanium aluminide[J].Scripta Metallurgica at Materialia,1990,24(02):319-324. |
[3] | Threadgill PL. .THE PROSPECTS FOR JOINING TITANIUM ALUMINIDES[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1995(0):640-646. |
[4] | MARTIN G S;ALBRIGHT C E;ONEST A J .An evaluation of CO2 laser beam welding on a Ti3Al-Nb alloy[J].Welding Journal,1995,74(02):77-82. |
[5] | WU A P;ZOU G S;REN J L .Microstructures and mechanical properties of Ti-24Al-17Nb (at.%) laser beam welding joints[J].INTERMETALLICS,2002,10(07):647-652. |
[6] | ACOFF V L;THOMPSON R G;GRIFFIN R D et al.Effect of heat treatment on microstructure and microhardness of spot welds in Ti 26Al 11Nb[J].MATERIALS SCIENCE & ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,1992,152(1-2):304-309. |
[7] | 刘博;武英;周朝霞 等.Ti-23Al-14Nb-3V合金氩弧焊接头的显微组织及其力学性能[J].材料科学与工艺,1997,5(01):45-49. |
[8] | 刘卫红,曹春晓,李艳,毛唯,李晓红.热工艺对Ti3Al基合金力学性能和焊接性影响[J].航空材料学报,2008(03):62-65. |
[9] | WANG Guo-qing,WU Ai-ping,ZHAO Yue,ZOU Gui-sheng,CHEN Qiang,REN Jia-lie.Effect of post-weld heat treatment on microstructure and properties of Ti-23Al-17Nb alloy laser beam welding joints[J].中国有色金属学报(英文版),2010(05):732-739. |
[10] | 刘卫红,李艳,毛唯,李晓红,曹春晓.Ti-24Al-15Nb-1Mo合金氩弧焊[J].航空材料学报,2006(03):111-115. |
[11] | Microstructure and properties of electron beam welded joint of Ti-22Al-25Nb/TC11[J].Aerospace science and technology,2010(5):P.302. |
[12] | CADDEN C H;YANG N Y C;HEDALEY T H .Microstructural evolution and mechanical properties of brazed joints in Ti13.4Al-21.2Nb[J].Welding Journal Welding Research Supplement,1997,8(02):316-325. |
[13] | 陈波,熊华平,毛唯,程耀永,吴欣,叶雷,周媛.AgCu基钎料钎焊Ti3Al基合金的接头组织与性能[J].焊接,2010(10):29-32. |
[14] | HE P;FENG J C;ZHOU H .Microstructure and strength of brazed joints of TiaAl-based alloy with NiCrSiB[J].Materials Characterization,2004,52(4-5):309-318. |
[15] | 熊华平;陈波;毛唯 等.Ti-Al基合金的扩散焊研究[J].材料科学与工艺,2009,17(01):16-20. |
[16] | THEADGILL P L.Metallurgical aspects of joining titanium aluminide-alloys[J].Proc Int Symp on Intermetallic Compounds (JIMIS-6)JIM,1991(10):1021-1025. |
[17] | MALLORY L;BAESLACK Ⅲ W A;PHILLIPS D .Evolution of the weld heat affected zone microstructure in a Ti-48Al-2Cr-2Nb gamma titanium aluminide[J].Journal of Materials Science Letters,1994,13(14):1061-1065. |
[18] | M. F. Arenas;V. L. Acoff .Analysis of gamma titanium aluminide welds produced by gas tungsten arc welding[J].Welding Journal,2003(5):110-S--115-S-0. |
[19] | Hirose A.;Kobayashi KF.;Arita Y. .MICROSTRUCTURE AND CRACK SENSITIVITY OF LASER-FUSION ZONES OF TI-46 MOL-PERCENT AL-2 MOL-PERCENT MO ALLOY[J].Journal of Materials Science,1995(4):970-979. |
[20] | THREADGILL P L;DANCE B G I .Joining of intermetallic alloys further studies[J].The TWI Journal,1997,6(02):257-316. |
[21] | 张秉刚,冯吉才,吴林,卢振.TiAl/TiAl和TiAl/TC4真空电子束焊接头组织结构及焊接性[J].焊接,2004(05):14-16,31. |
[22] | J. Ding;J. N. Wang;Z. H. Hu;D. Y. Ding .Joining of γ-TiAl to low alloy steel by electron beam welding[J].Materials Science and Technology: MST: A publication of the Institute of Metals,2002(8):908-912. |
[23] | UENISHI K;HROYUKI S;KOJIRO F K .Joining of intermetallic compound TiAl by using Al filler metal[J].Zeitschrift für Metallkunde,1995,86(04):270-274. |
[24] | R.K. SHIUE;S.K. WU;S.Y. CHEN .Infrared brazing of TiAl intermetallic using pure silver[J].Intermetallics,2004(7/9):929-936. |
[25] | Toshimitsu Tetsui .Effects of brazing filler on properties of brazed joints between TiAl and metallic materials[J].Intermetallics,2001(3):253-260. |
[26] | 叶雷,熊华平,陈波,毛唯,程耀永,李晓红.CoFe基和Fe基高温钎料钎焊TiAl合金接头微观组织[J].材料工程,2010(10):61-64,68. |
[27] | J. Cao;P. He;M. Wang .Mechanical milling of Ti-Ni-Si filler metal for brazing TiAl intermetallics[J].Intermetallics,2011(7):855-859. |
[28] | NODA T;SHIMIZU T;OKABE M et al.Joining of TiAl and steels by inducting brazing[J].Material Science and Engineering,1997,A239-240:613-618. |
[29] | 陈波,熊华平,毛唯,程耀永,叶雷,吴欣.采用Ti-15Cu-15Ni钎料的TiAl/42CrMo钢接头组织及形成机理[J].航空材料学报,2006(03):317-318. |
[30] | 李海新,何鹏,林铁松,潘峰,冯吉才,黄玉东.TiAl/Ni基合金反应钎焊接头的微观组织及剪切强度[J].中国有色金属学报(英文版),2012(02):324-329. |
[31] | 刘会杰.SiC陶瓷与TiAl合金的真空钎焊[J].焊接,1999(03):7. |
[32] | 陈波,熊华平,毛唯,程耀永.SiO2f/SiO2复合材料与TC4,Ti3Al和TiAl的钎焊[J].材料工程,2012(02):41-44,90. |
[33] | G. Cam;H. Clemens .Diffusion bonding of γ-TiAl sheets[J].Intermetallics,1999(9):1025-1031. |
[34] | GL ATZ W;CLEMENS H .Diffusion bonding of intermetallic Ti-47Al-2Cr-0.2Si sheet material and mechanical properties of joints at room temperature and elevated temperatures[J].INTERMETALLICS,1997,5(06):415-423. |
[35] | Cam G;Ipekoglu G;Bohm KH;Kocak M .Investigation into the microstructure and mechanical properties of diffusion bonded TiAl alloys[J].Journal of Materials Science,2006(16):5273-5282. |
[36] | 段辉平,罗俊,张涛,Mustafa Kocak.TiAl/IN718合金过渡液相连接[J].北京航空航天大学学报,2004(10):984-988. |
[37] | 何鹏,李海新,林铁松,黄玉东,刘羽,钱国统.TiAl合金与镍基高温合金的扩散连接[J].焊接学报,2012(01):17-20. |
[38] | TAUGHI K;AYADA M;ISHIHARA K N.Near-net shape processing of TiAl intermetallic compound by Pseudo-HIP-SHS[A].Nevada,USA:TMS,1995:619-626. |
[39] | UENISHI K;SUNI H;KOBAYASHI K F .Joining of the intermetallic compound using SHS reaction[J].Zeitschrift für Metallkunde,1995,86(01):64-68. |
[40] | 宫下(卓);日野春树 .TiAl金属间化合物の摩擦压接特性[J].日本金属学会志,1994,58(02):215-220. |
[41] | Won-Bae Lee;Young-Jig Kim;Seung-Boo Jung .Effects of copper insert layer on the properties of friction welded joints between TiAl and AISI 4140 structural steel[J].Intermetallics,2004(6):671-678. |
[42] | HOUKN;JUHASMC;BAESLACKIIIWA.Anelectron microscope study of inertia friction welds in Ti-48Al-2Cr-2Nb gamma titanium aluminide[A].Tennesseen,USA,1992:1135-1137. |
[43] | 李晓红;熊华平;张学军.先进航空材料焊接技术[M].北京:国防工业出版社,2012 |
[44] | BRATOLOTTA P A;DAVID L K.Titanium aluminide applications in the high speed civil transport[J].The Minerals Metals & Materials Society,1999(05):3-10. |
[45] | CLEMENS H;LORICH A;EBERHARDT N et al.Technology,properties and applications of intermetallic γ-TiAl based alloys[J].Zeitschrift fiir Metallkd,1999,90(08):569-580. |
[46] | XUAN N D .Friction welding interlayer and method for joining gamma titanium aluminide to steel,and turbocharger components thereof[P].USApatent:6291086 B1,2001-09-18. |
[47] | J. A. Fernie;R. A. L. Drew;K. M. Knowles .Joining of engineering ceramics[J].International Materials Reviews,2009(5):283-331. |
[48] | ARAVINDAN S;KRISHNAMURTHY R .Joining of ceramic composites by microwave heating[J].Materials Letters,1998,38(04):245-249. |
[49] | ESPOSITO L;BELLOSI A .Joining of ceramic oxides by liquid wetting and capillarity[J].Scripta Materialia,2001,45(07):759-766. |
[50] | MAILLIART O;CHAUMAT V;HODAJ F.Wetting and joining of silicon carbide with a molten glass in air[A].Aachen,Germany:DVS Berichte,2010:76-80. |
[51] | CHANG L S;HUANG C F .Transient liquid phase bonding of alumina to alumina via boron oxide interlayer[J].CERAMICS INTERNATIONAL,2004,30(08):2121-2127. |
[52] | S. M. Gross-Barsnick;B. Cela Greven;P. Batfalsky;T. Koppitz;G. Natour;L. Blum;R. Conradt .Recent results in SOFC glass-ceramic sealant technology development[J].DVS-Berichte,2013(TN.293):50-53. |
[53] | ZHOU F .Joining of silicon nitride ceramic composites with Y2O3-Al2O3-SiO2 mixtures[J].Journal of Materials Processing Technology,2002,127(03):293-297. |
[54] | Mani Gopal;Mark Sixta;Lutgard De Jonghe;Gareth Thomas .Seamless joining of silicon nitride ceramics[J].Journal of the American Ceramic Society,2001(4):708-712. |
[55] | Dominguez-Rodriguez A.;Jimenez-Melendo M.;Guiberteau F. .Heterogeneous junction of yttria partially stabilized zirconia by superplastic flow[J].Journal of Materials Research,1998(6):1631-1636. |
[56] | J. -D. Mun;B. Derby;A. P. Sutton .Texture change in Ni and Cu foils on diffusion bonding to zirconia[J].Scripta materialia,1997(1):1-6. |
[57] | Esposito L.;Guicciardi S.;de Portu G.;Bellosi A. .Solid state bonding of Al2O3 with Cu, Ni and Fe: characteristics and properties[J].Journal of Materials Science,1998(7):1827-1836. |
[58] | Polanco R;De Pablos A;Miranzo P;Osendi MI .Metal-ceramic interfaces: joining silicon nitride-stainless steel[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2004(1/4):506-512. |
[59] | Wei P.;Li JQ.;Chen J. .Titanium metallization of Si3N4 ceramics by molten salt reaction: coating microstructure and brazing property[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,2002(1/2):126-129. |
[60] | OKAMURA H .Brazing ceramics and metals[J].Welding International,1993,7(03):236-239. |
[61] | KANG S;KIM H J .Design of high temperature brazing alloys for ceramic-metal joints[J].Welding Journal,1995,74(09):289-295. |
[62] | 万传庚;PARITSALIS;EUSTATHOPULOS N .高温钎料Pd-CuTi在氧化铝上润湿及界面反应[J].焊接学报,1994,15(04):209-213. |
[63] | NAKA M;TANAKA T;OKAMOTO I.Joining of silicon nitride using amorphous Cu-Ti filler metal[J].Transactions of JWRI,1987(01):83. |
[64] | XIONG H P;WAN C G;ZHOU Z F .Development of a new CuNiTiB brazing alloy for joining Si3 N4 to Si3N4[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1998,29(10):2591-2596. |
[65] | Hadian AM.;Drew RAL. .STRENGTH AND MICROSTRUCTURE OF SILICON NITRIDE CERAMICS BRAZED WITH NICKEL-CHROMIUM-SILICON ALLOYS[J].Journal of the American Ceramic Society,1996(3):659-665. |
[66] | CHEN J H;WANG G Z .Segregation of chromium at the interface between Ni-Cr-Si-Ti brazing filler metal and Si3N4 ceramics[J].Journal of Materials Science Letters,1993,12(01):87-90. |
[67] | REICHEL U;WARLIMONT H Z .Rapidly solidified CoTi alloys as brazing foils for high temperature joining of silicon nitride ceramic[J].Zeitschrift für Metallkude,1999,90(09):699-704. |
[68] | PAULASTO M;CECCONE G;PETEVES S D .Joining of silicon nitride via a transient liquid[J].Scripta Materialia,1997,10:1167-1173. |
[69] | OKAMURA H .Brazing ceramics and metals[J].Welding International,1993,7(03):236-242. |
[70] | R.E. Loehman .Recent Progress in Ceramic Joining[J].Key engineering materials,1999(161/163):657-662. |
[71] | H. P. Xiong;B. Chen;W. Mao;L. Ye;X. H. Li .Wettability of V-active Pd-based alloys on Si_3N_4 ceramic and the strength of Si_3N_4/Si_3N_4 Joints[J].DVS-Berichte,2010(TN.263):98-102. |
[72] | Y. Sun;J. Zhang;Y.P. Geng .Microstructure and mechanical properties of an Si_3N_4/Si_3N_4 joint brazed with Au-Ni-Pd-V filler alloy[J].Scripta materialia,2011(5):414-417. |
[73] | NAKA M;TANIGUCHI H;OKAMOTO I .Heat-resistant brazing of ceramics (report Ⅰ)[J].Transactions of JWRI,1990,19(01):25-29. |
[74] | XIONG H P;CHEN B;KANG Y S et al.Wettability of CoV,and PdNi-Cr V system brazing alloys on SiC ceramic and in terfacial reactions[J].Scripta Materialia,2007,56(02):173-176. |
[75] | MCDERMID J R;PUGH M D;DREW R A L .The interaction of reaction-bonded silicon carbide and Inconel600 with a nickelbased brazing alloy[J].Metallurgical Transactions A,1989,20(09):1803-1810. |
[76] | Xiong HP;Mao W;Xie YH;Chen B;Guo WL;Li XH;Cheng YY .Control of interfacial reactions and strength of the SiC/SiC joints brazed with newly-developed Co-based brazing alloy[J].Journal of Materials Research,2007(10):2727-2736. |
[77] | Hua-Ping Xiong;Wei Mao;Yong-Hui Xie .Brazing of SiC to a wrought nickel-based superalloy using CoFeNi(Si, B)CrTi filler metal[J].Materials Letters,2007(25):4662-4665. |
[78] | H. P. Martin;A. Triebert;B. Matthey .Ta-Ni-braze for high temperature stable ceramic - ceramic junctions[J].DVS-Berichte,2013(TN.293):54-58. |
[79] | KAPPALOV B K;VEIS M M;KADUN Y I et al.Brazing C/C composite materials with metal-containing brazing alloys[J].Welding International,1992,6(09):562-566. |
[80] | 熊华平,毛唯,陈波,李晓红.陶瓷及陶瓷基复合材料高温钎料的研究现状与进展[J].焊接,2008(11):19-24. |
[81] | FOX C W;SLAUGHTER G M .Brazing of ceramics[J].Welding Journal,1964,43(07):591-559. |
[82] | ANDO Y;TOBITA S;FUJIMURA T.Development of bonding methods for graphite materials[M].Japan"Japanese Atomic Energy Research Institute,1964 |
[83] | DONNELLY R G D;GILLILAND R G G;FOX C W F.The development of alloys and techniques for brazing graphite[A].Hollywood,1962 |
[84] | Qiaoying Tong;Laifeng Cheng .Liquid Infiltration Joining of 2D C/SiC Composite[J].Science and Engineering of Composite Materials,2006(1):31-36. |
[85] | H. P. Xiong;B. Chen;W. Mao;X. H. Li .JOINING OF C_f/SiC COMPOSITE WITH Pd-Co-V BRAZING FILLER[J].Welding in the World: Journal of the International Institute of Welding: Journal of the International Institute of Welding,2012(1/2):76-80. |
[86] | D. Korn;G. Elssner;R.M. Cannon .Fracture properties of interfacially doped Nb-Al_2O_3 bicrystals: I, fracture characteristics[J].Acta materialia,2002(15):3881-3901. |
[87] | 陈波,熊华平,毛唯,程耀永.SiO2f/SiO2复合材料自身及其与铜、不锈钢的钎焊[J].航空材料学报,2012(01):35-40. |
[88] | CANNON R M;KORN D;ELSSNER G et al.Fracture properties of interfacially doped Nb-Al2O3 bicrystals:Ⅱ,relation of interfacial bonding,chemistry and local plasticity[J].ACTA MATERIALIA,2002,50(15):3903-3925. |
[89] | A. Ponicke;J. Schilm;M. Kusnezoff;A. Michaelis .Reactive air brazing as joining technology for SOFC[J].DVS-Berichte,2010(TN.263):70-75. |
[90] | Palit D;Meier AM .Reaction kinetics and mechanical properties in the reactive brazing of copper to aluminum nitride[J].Journal of Materials Science,2006(21):7197-7209. |
[91] | Weng WP.;Chai YH.;Chuang TH.;Wu HW. .INTERFACIAL CHARACTERISTICS FOR ACTIVE BRAZING OF ALUMINA TO SUPERALLOYS[J].Journal of advanced materials,1997(2):35-40. |
[92] | Jin Hui Xiong;Ji Hua Huang;Hua Zhang;Xing Ke Zhao .Brazing of carbon fiber reinforced SiC composite and TC4 using Ag–Cu–Ti active brazing alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2010(4/5):1096-1101. |
[93] | 熊进辉,黄继华,薛行雁,张华,赵兴科,林国标.C_f/SiC复合材料与Ti合金的AgCuTi-W复合钎焊[J].航空材料学报,2009(06):48-52. |
[94] | 梁赤勇,堵永国,张为军,郑晓慧,芦玉峰.Cf/SiC复合材料与Nb合金的连接[J].宇航材料工艺,2009(03):45-48,52. |
[95] | 张勇 .C<,f>/SiC陶瓷基复合材料与高温合金的高温钎焊研究[D].钢铁研究总院,2006. |
[96] | 熊华平,吴世彪,陈波,毛唯.缓解陶瓷/金属连接接头残余热应力的方法研究进展[J].焊接学报,2013(09):107-112. |
[97] | FERNIE J A;HANSON W B.Feasibility trials on heat sink attachment for new electronic ceramic substrates[J].Processing and Fabrication of Advanced Materials V,1996(03):743-754. |
[98] | TUCKER M C;JACOBSON C P;DE JONGHE L C .A braze system for sealing metal-supported solid oxide fuel cells[J].Journal of Power Sources,2006,160(02):1049-1057. |
[99] | P. Appendino;V. Casalegno;M. Ferraris;M. Grattarola;M. Merola;M. Salvo .Joining of C/C composites to copper[J].Fusion engineering and design,2003(0):225-229. |
[100] | 闫联生,王涛,邹武,张钢锤,刘永华.国外复合材料推力室技术研究进展[J].固体火箭技术,2003(01):64-66,70. |
[101] | 王平,张权明,李良.Cf/SiC陶瓷基复合材料车削加工工艺研究[J].火箭推进,2011(02):67-70. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%