利用球盘式摩擦磨损试验机考察了玻璃纤维(GF)增强聚醚醚酮(PEEK)复合材料在干摩擦和水润滑条件下的摩擦磨损性能,并探讨了其磨损机理.结果表明:在干摩擦和水润滑条件下,PEEK和GF/PEEK的摩擦因数和磨损率均随载荷和对磨时间的增加逐渐增大并趋于稳定,GF的加入可以显著降低GF/PEEK复合材料的摩擦因数和磨损率;在水润滑条件下,PEEK和GF/PEEK的摩擦因数和磨损率比干摩擦下显著降低.干摩擦下,PEEK以黏着磨损和磨粒磨损的混合磨损形式为主,水润滑条件下,磨损方式主要是以轻微的黏着磨损为主;干摩擦下,GF/PEEK磨损表面有大量的微观断裂裂纹和破碎,以磨粒磨损和疲劳磨损为主,水润滑条件下,磨损表面仅有微观切削的痕迹,磨损方式以轻微磨粒磨损为主.由于水的冷却和润滑作用,使得复合材料向对偶钢球的黏着转移明显减弱,同时阻止了对偶钢球上的Fe向复合材料磨损表面转移,从而减轻摩擦、降低摩擦表面温升,显著改善复合材料的摩擦磨损性能.
参考文献
| [1] | STEINING T C;SMITH C P;KIMBER P J.Polyetheretherketone:high performance in a new thermoplastic[J].Modern Plastics International,1982(03):54-56. |
| [2] | M. Harrass;K. Friedrich;A. A. Almajid .Tribological behavior of selected engineering polymers under rolling contact[J].Tribology International,2010(3):635-646. |
| [3] | BIJWE J.Potential of fibres and solid lubricants to enhance the triboutility of PEEK in adverse operating conditions[J].INDUSTRIAL LUBRICATION AND TRIBOLOGY,2007(04):156-165. |
| [4] | Z. Zhang;C. Breidt;L. Chang;K. Friedrich .Wear of PEEK composites related to their mechanical performances[J].Tribology International,2004(3):271-277. |
| [5] | FRANCISCO M;GAITONDE V N;KAMIK S R.Influence of cutting condition on machinability aspects of PEEK,PEEK CF 30 and PEEK GF 30 composites using PCD tools[J].Journal of Materials Processing Technology,2009(04):1980-1987. |
| [6] | THOMASON J L;VLUG M A .Influence of fiber length and concentration on the properties of glass fiber reinforced polypropylene impact properties[J].COMPOSITES,1997,28:277-288. |
| [7] | SCHULEDJEWSKI R;FRIEDRICH K .Tensile properties of filled liquid crystal polymer systems[J].Journal of Materials Science Letters,1992,11:840-842. |
| [8] | STOLARSKI T A .External lubrication of high temperature termoplastic polymers[J].Journal of Applied Polymer Science,1993,48(05):897-904. |
| [9] | COGSWELL F N.Thermoplastic Aromatic Polymer Composites[M].Oxford:Butterworth-Heinemann,1992 |
| [10] | DAVIM J P;CARDOSO R .Effect of the reinforcement (carbon or glass fibres) on friction and wear behaviour of the PEEK against steel surface at a long dry sliding[J].WEAR,2009,266(7-8):795-779. |
| [11] | David L. Burris;W. Gregory Sawyer .Tribological behavior of PEEK components with compositionally graded PEEK/PTFE surfaces[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2007(1/2):220-224. |
| [12] | XX Chu;Z.X. Wu;R.J. Huang .Mechanical and thermal expansion properties of glass fibers reinforced PEEK composites at cryogenic temperatures[J].Cryogenics,2010(2):84-88. |
| [13] | B. H. Stuart .Tribological studies of poly(ether ether ketone) blends[J].Tribology International,1998(11):647-651. |
| [14] | FRIEDRICH K;KARGER-KOCSIS J;LU Z .Effect of steel counterface roughness and temperature on the friction and wear of PEEK composites under dry sliding conditions[J].WEAR,1991,148:235-247. |
| [15] | Xiong DS.;Ge SR. .Friction and wear properties of UHMWPE/Al2O3 ceramic under different lubricating conditions[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2001(1):242-245. |
| [16] | CAHN R W.Materials Science and Technology[M].London:Cambridge University Press,1993 |
| [17] | G.Y. Xie;G.X. Sui;R. Yang .Effects of potassium titanate whiskers and carbon fibers on the wear behavior of polyetheretherketone composite under water lubricated condition[J].Composites science and technology,2011(6):828-835. |
| [18] | PETER J B.Friction Science and Technology:From Concepts to Applications[M].Florida,Boca Raton:CRC Press,2009 |
| [19] | 温诗铸;黄平.摩擦学原理[M].北京:清华大学出版社,2002 |
| [20] | The application of PEEK in stainless steel fiber and carbon fiber reinforced composites[J].Composites, Part B. Engineering,2008(4):p.585-591. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%