以球/平面接触方式,进行炭纤维织物复合材料与GCr15钢球之间的扭动微动磨损实验研究,讨论纤维取向对微动磨损性能的影响.结果表明:该材料与金属材料类似,均存在3个微动运行区域,即部分滑移区、混合区以及滑移区,微动磨损机制为磨粒磨损和氧化磨损.炭纤维复合材料微动摩擦磨损性能表现出明显各向异性特征,即纤维平行且垂直于接触表面的纤维混合排布(N取向)复合材料的摩擦耗散能和磨损量均小于纤维平行于接触表面的P取向.在混合区域,磨损区半径随循环周次的增加而逐渐增大,且N取向小于P取向.
参考文献
[1] | WATERHOUSE R B.Fretting Corrosion[M].England:Pergamon press,1972 |
[2] | HILLS D A .Mechanics of fretting fatigue[J].WEAR,1994,175(01):107-113. |
[3] | BERTHIER Y;VINCENT L;GODET M .Fretting fatigue and fretting wear[J].Tribology International,1989,22(04):235-242. |
[4] | C. M. Manjunatha;Ramesh Bojja;N. Jagannathan;A. J. Kinloch;A. C. Taylor.Enhanced fatigue behavior of a glass fiber reinforced hybrid particles modified epoxy nanocomposite under WISPERX spectrum load sequence[J].International Journal of Fatigue,2013:25-31. |
[5] | M.T. Isa;A.S. Ahmed;B.O. Aderemi;R.M. Taib;I.A. Mohammed-Dabo .Effect of fiber type and combinations on the mechanical, physical and thermal stability properties of polyester hybrid composites[J].Composites, Part B. Engineering,2013(Sep.):217-223. |
[6] | TSUCHIKURA N;FAUDREE M C;NISHI Y .Charpy impact value of sandwich structural (CFRP/ABS/CFRP) composites constructed with carbon fiber reinforced epoxy polymer (CFRP) and acrylonitrile butadiene styrene (ABS) sheets separately irra diated by electron beam prior to lamination[J].Materials Transactions,2013,54(03):371-379. |
[7] | 田农,薛忠民,张佐光.纤维增强聚合物基摩擦材料的研究进展[J].润滑与密封,2009(02):98-101,105. |
[8] | 郭清兵,邢东明,陈江华,李翠金,肖乃玉.聚合物基微米复合材料的摩擦磨损性能研究进展[J].仲恺农业工程学院学报,2011(01):61-66. |
[9] | 赵荃,黄豪杰.民用飞机复合材料翼面结构设计优化研究[J].科技创新导报,2013(11):82-85,87. |
[10] | J.A. Artero-Guerrero;J. Pernas-Sanchez;J. Lopez-Puente;D. Varas .On the influence of filling level in CFRP aircraft fuel tank subjected to high velocity impacts[J].Composite structures,2014(Jan.):570-577. |
[11] | WUKT;SUNZ;JENCK.A multi point ultrasonic detection approach to fretting crack detection in an aircraft component[A].San Diego,California:SPIE,2012:834710-834715. |
[12] | Lee KJ;Cheng HZ;Jou WS;Chen GJ;Liang CW .The influence of carbon fiber orientation on the mechanical and tribological behavior of carbon fiber/LCP composites[J].Materials Chemistry and Physics,2007(2/3):187-194. |
[13] | CIRINO M;FRIEDRICH K;PIPES R .The effect of fiber orientation on the abrasive wear behavior of polymer composite ma terials[J].WEAR,1988,121(02):127-141. |
[14] | SUNG N H;SUH N P.Friction and wear of fiber reinforced polymeric composites-effect of fiber orientation on wear[A].Montreal,Canada:Society of Plastics Engineers,1977:311-314. |
[15] | NAK-HO S;SUH N P .Effect of fiber orientation on friction and wear of fiber reinforced polymeric composites[J].WEAR,1979,53(01):129-141. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%