IC-218合金在不同变形量冷轧后,表现出不同的退火行为.在500℃以下退火时,60%冷轧试样表现出时效硬化,而20%冷轧试样则呈现单调软化.结合热分析和X光衍射峰展宽量分析,发现这种硬化与软化与有序恢复进程相关.在600℃以上,两种变形试样都表现出回复软化,但在温度不太高时,60%冷轧试样的回复程度远低于20%冷轧试样,随着温度进一步升高,两种试样的回复程度趋于相同.实验结果定性地支持Cahn关于有序合金时效硬化的半有序判据和相关的机理模型.
参考文献
[1] | B Roessler;D. T. Novick;M. B. Bever .Annealing of the ordered and disordered alloy Cu3Au after the cold work[J].Transactions of the Metallurgical Society of AIME,1963,227:985. |
[2] | R W Cahn;M Takeyama;J A Horton;C. T, Liu .Recovery and recrystallization of the deformed orderable alloy (Co 72Fe22) 3V.J[J].Materials Research,1991,6(06):57. |
[3] | C T Liu;V. K. Sikka .Nickel Aluminides for Structural Use[J].Journal of The Minerals,Metals & Materials Society,1986,38:19. |
[4] | 林一坚;R.W.Cahn .共格γ/γ界面对位错运动的单向阀门作用[J].钢铁研究学报,1994,6:47. |
[5] | J B Cohen;M. B. Bever .The effect of cold work on the alloy Cu3Au[J].Transactions of the Metallurgical Society of AIME,1960,155:218. |
[6] | J Ball;R. Mitteau;G. Gottstein.Investigation of deformation induced disorder and reordering by subsequent annealing in Ni3Al +B[A].Yavari:Elsevier applied science,1992:138. |
[7] | M Gagne;E.M.Schulson .The effect of annealing on coldworked Zr3Al[J].Metallurgical and Materials Transactions,1976,7:1775. |
[8] | R E Smallman;H. H. Westrnacott .Stacking faults in facecentered cubic metals and alloys[J].Philosophical Magazine,1957,2:669. |
[9] | J P Clark;G. P. Mohanty .anomalous recovery phenomena during annealing of cold worked Ni3Al[J].Science,1974,8:959. |
[10] | D E Mikkola;J. B. Cohen.Examples of application of line broadering[A].Gordon and Breach Science publishers,1965:289. |
[11] | C L Corey;D I Potter .Recovery process and ordering in Ni3Al[J].Journal of Applied Physics,1967,38:3894. |
[12] | M D Baro;S.Surinach;J. Malagelada;M.T. Clavaguera-mora,S.Gialanella,R. W. Cahn .Kinetics of reordering of Ni3 Al disordered by ball-milling[J].冶金材料学报,1993,41:1065. |
[13] | A R Yavari .Reordering kinetics and magnetic properties of mechanically disordered nanocrystalline L2-type Ni3Al + Fe alloys[J].Acta Materialia,1993,41:1391. |
[14] | J S C Jang C C Koch.Amorphization and disordering of the Ni3Al ordered intermetallic by mechanical milling[J].Journal of Materials Research,1990(05):498. |
[15] | 林一坚;S. Gialanella;R. W. Cahn .无序态(Co Pe)3V应变-时效硬化的微观机制[J].金属学报,1992(28):A506. |
[16] | A E Vidoz;L.M.Brown .On work-hardening in ordered alloys; Phil[J].Mag,1962,7:1167. |
[17] | R F Decker;J R Mihaliain.美国镍基高温合金[M].北京:科学出版社,1978:53. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%