综述连铸坯初始凝固行为研究现状,分析常规连铸过程中初始坯壳形成的影响因素及电磁连铸过程中控制初始坯壳形成的理论和实验的研究特点,提出了该研究中尚需解决的问题,为改善连铸坯质量提供参考.
参考文献
[1] | E Takeuchi;J.K.Brimacombe .The formation of oscillation marks in the continuous casting of steel slabs[J].Metallurgical and Materials Transactions B:Process Metallurgy and Materials Processing Science,1984,3:493-509. |
[2] | 杨文改 等.连铸初生坯壳凝固传热的模拟[J].中国有色金属学报,1997,7(07):92-95. |
[3] | Ismael G.Saucedo.Early Solidification During The Continuous Casting of Steel[A].,1991:79-89. |
[4] | I V Samarasekera;J.K.Brimacombe.Thermal and mechanical behaviour of continuous-casting billet mould[J].Ironmaking and Steelmaking,1982(01):1-15. |
[5] | Edward S. Szekeres .Overview of mold oscillation in continuous casting[J].Iron and Steel Engineer,1996(7):29-37. |
[6] | 陈栋梁.连铸弯月面区域凝固传热的数值模拟[J].钢铁,1997(08):26-29. |
[7] | Tsutomu Takamoto et al.Initial solidification analysis in the vicinity of menisus in continuous casting mold[J].Transactions of the Iron and Steel Institute of Japan,1986,26:s132-136. |
[8] | Delhalle A.Control of the first shell formation during continuous casting of steel[J].Rev,Met,Cah Inf Tech,1989(06):483-489. |
[9] | S.Itoyama .Control of Early Solidification in Continuous Casting by Horizontal Oscillation in Synchronization with Vertical Oscillation of the Mold[J].ISIJ International,1998(5):461-468. |
[10] | M.Kawamoto .Improvement of the Initial Stage of Solidification by Using Mild Cooling Mold Powder[J].ISIJ International,1997(2):134-139. |
[11] | J.Cho .Thermal Resistance at the Interface between Mold Flux Film and Mold for Continuous Casting of Steels[J].ISIJ International,1998(5):440-446. |
[12] | Hideo MIZUKAIMI .Initial Solidification Behavior of Ultra Low, Low and Middle Carbon Steel[J].ISIJ International,1999(12):1262-1269. |
[13] | R B Mahapatra;J.K.Brimacombe et al.Mold behavior and its influence on quality in the continuous casting of steel slabs:part Ⅱ[J].Metallurgical and Materials Transactions B:Process Metallurgy and Materials Processing Science,1991,22:875-888. |
[14] | S Chandra;J K Brimacombe et al.Mould-strand interaction in continuous casting of steel billets part Ⅲ[J].Ironmaking and Steelmaking,1993,20(02):104-112. |
[15] | 任忠鸣 等.软接触结晶器电磁连铸中初始凝固的基础研究[J].金属学报,1999,35(08):851-855. |
[16] | Takehiko TOH;Eiichi TAKEUCHI;Masatake HOJO .Electromagnetic Control of Initial Solidification in Continuous Casting of Steel by Low Frequency Alternating Magnetic Field[J].ISIJ International,1997(11):1112-1119. |
[17] | Takehiko TOH.Control of Initial Solidification in Continuous Casting by Use of Electromagnetic Shaping Effect[A].Nagoya,ISIJ,1994:254-259. |
[18] | Ikuto MIYOSHINO .Influence of Electromagnetic Pressure on the Early Solidification in a Continuous Casting Mold[J].ISIJ International,1989,29(12):1040-1047. |
[19] | Hitoshi Nakata etc.Improvement of Surface Quality of Steel by Electromagnetic Mold[C].International Symposium on Electromagnetic Processing of Materials,1994,ISIJ:166-171. |
[20] | Masayuki Nakada etc.Control of Initial Solidification in Continuous Casting Mold by Application of High Frequency Magnetic Field.Edited by J.Szekely[Z].Magnetohydrodynamics in Process Metallurgy,1991. |
[21] | Tsutomu Tanaka.Solidification Control Making Use of High Frequency Electromagnetic Field In a Mould Connected With Tundish[A].Nagoya,ISIJ,1994:248-253. |
[22] | 中田正之 等.高周波磁场によ钢の初期凝固抑制[J].铁と钢(日本),1996,82(12):1005-1010. |
[23] | Masahiro Tani .Electromagnetic Shaping For the Control of Initial Solidification in Continuous Casting[Z].Edited by J Szekely Magnetohydrodynamics in Process Metallurgy,1991. |
[24] | 古桥诚治 等.高周波电磁场を利用した钢の连续铸造におけゐ初期凝固抑制[J].铁と钢(日本),1998,84(09):625-631. |
[25] | R Moreau.Solidification Under Magnetic Field:Mechanisms,Expected Results[M].Challenges.Edited by J.Szekely.Magnetohydrodynamics in Process Metallurgy,1991:15-20. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%