讨论了文献中从实际高炉的研究和解剖试验得出的回旋区计算关系和数学模型.基于回旋区边界上力的平衡,并考虑理论燃烧温度和有效直径等的影响,建立了同类型竖炉风口回旋区的简化模型.
参考文献
| [1] | 可使用多种原料和燃料的节能化铁竖炉[J].上海金属,1999(02):37. |
| [2] | 舍克里J;蔡开科.金属初级加工过程的数学和物理模拟[M].北京:冶金工业出版社,1992:12. |
| [3] | Hatano M;Fukuda M;Takeuchi M .An Experimental Study of the Formation of Raceway Using a Cold Model[J].JISI,1976,62(01):25-32. |
| [4] | Hatano M;Fukuda M;Hiraoka B;Masuike T .Anslysis of the Combustion Zone in the Experimental Blast Furnace[J].JISI,1976,62(05):505-513. |
| [5] | Nakamura M;Sugiyama T;Uno T;Hara Y Kondo S. .Cortfigulation of the Raceway in the Experimental Furnace[J].JISI,1977,63(01):28-37. |
| [6] | Nomura S .A Simple Treatment on the Geometry of Raceway Zone[J].Transactions of the Iron and Steel Institute of Japan,1986,26(02):107-113. |
| [7] | Wagstaff J B;Elliot J F;Buchman R A .Physical Conditions in the Combustion and Smelting Zone of a Blas Furnace[J].Journal of Metals,1952,4(07):709. |
| [8] | Taylor J;Lonie G;Hay R.A Study of the Tuyere Combustion Zone[J].JISI,1957:330-341. |
| [9] | Gardner G C .A New Correlation of Blast Penetration in a Blast Furnace[J].Transactions AIME,1960,218:423-128. |
| [10] | 毕学工.高炉过程数学模型及计算机控制[M].北京:冶金工业出版社,1996:212. |
| [11] | 陈义胜;贺友多 .高炉风口回旋区三维数学模型[J].金属学报,1993,29(10):433-438. |
| [12] | 福武刚;杜鹤桂.高炉回旋区和炉缸工作文集[M].北京:冶金工业出版社,1986:43-53. |
| [13] | 房觉.熔融还原与直接还原[M].沈阳:东北大学出版社,1996:76. |
| [14] | 周师庸,徐君,徐万仁.高炉高喷煤水平下对回旋区内残炭的研究[J].钢铁,2000(12):9. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%