综合评述了关于不锈钢AOD精炼过程的物理模型研究和取得的进展,阐明了AOD过程的一些重要特征,认为过去一些模拟研究因考虑运动相似性不够,影响了模拟结果的准确性,魏季和等的工作充分考虑了运动相似性,所得模拟结果与实际更为吻合.
参考文献
[1] | 郭家祺,刘明生.AOD精炼不锈钢工艺发展[J].炼钢,2002(02):52-58. |
[2] | J C C Leach;A. Rodgers;G. Sheehan .Operation of the AOD Process in BSC[J].Ironmaking and Steelmaking,1978,5:107-120. |
[3] | J Szekely;N. El-kaddah.Turbulence and Agitation in Ladle Metallurgical Operations[J].Ironmaking and Steelmaking,1984(01):22-29. |
[4] | R M Figueira;J.Szekely .Turbulent Fluid Flow Phenomena in a Water Model of an AOD System[J].Metallurgical and Materials Transactions,1985,16:67-75. |
[5] | Ji-He Wei;Jin-Chang Ma;Yang-Yi Fan .Water Modelling Study of Fluid Flow and Mixing Characteristics in Bath during AOD Process[J].Ironmaking and Steelmaking,1999,26(05):363-371. |
[6] | G Carlsson;E. Burstrom .Aspects on Tuyere Design[J].Scandinavian Journal of Metallurgy,1986,15:298-304. |
[7] | Ji-He Wei;Jin-Chang MA;Yang-Yi FAN.Water Modelling Study of Fluid Flow and Mixing in an AOD Bath with Rotating Jets[J].ISS Transactions Iron and Steelmaker,2001(04):59-67. |
[8] | Aoki T;Masuda S;Hatono A et al.Characteristics of Submerged Gas Jets and a New Type Bottom Blowing Tuyere[J].Conf on Injection Phenomena in Extraction and Refining,1982,1:1-36. |
[9] | Aoki T .The Mechanism of the Back-attack Phenomenon on a Bottom Blowing Tuyere Investigated in Model Experiments[J].Tetsu To Hagane-Journal of The Iron and Steel Institute of Japan,1990,76(11):1996-2003. |
[10] | Aoki T Elimination of the Back-attack Phenomenon on a Bottom Blowing Tuyere Investigated in Model Experiments[J].Tetsu To Hagane-Journal of The Iron and Steel Institute of Japan,1990,76(11):2004-2010. |
[11] | Ji-He WEI .Back-attack Phenomena of Gas Jets with Submerged Horizontally Blowing and Effects an Erosion and Wear of Refractory Lining[J].ISIJ International,1999(8):779-786. |
[12] | Timo Fabritius;Pentti Kupari;Jouko Harkki .Physical modelling of a sidewall-blowing converter[J].Scandinavian Journal of Metallurgy,2001(2):57-64. |
[13] | Timo Matti Juhani Fabritius;Petri Tapani Mure;Pentti Antero Kupari .Combined blowing with three - hole lance in a sidewall blowing converter[J].Steel Research,2001(7):237-244. |
[14] | S.K. Sharma .Criteria for Predicting Penetration of Molten Steel in Tuyeres During Inert Gas Injection[J].I and 8S Steelmaking Conf Proc,1986,69:653-668. |
[15] | L Farmer;D. Lach;M. Lanyi.Gas Injection Tuyere Design and Experiebce. 72nd Steelmaking Conference Proceedings[C].ISS, AIME,1989:487-495. |
[16] | S C Koria;S.Singh .Experimental Investigations on the Desigh of Gas Injection Lances[J].ISIJ International,1989,29(08):650-657. |
[17] | H Gorges;W. Pulvemacher;W. Rubens;H.Diersten .Development and Advantages of Top Blowing in Combination with the AOD Process at Fried[M].Proc. 3rd Int. Iron Steel Congr., Chicago, IL, Apr,1978,16-21:161-167. |
[18] | Ji-He Wei;Shun-Hua Xiang;Yang-Yi Fan;Neng-Wen Yu;Jing-Chang Ma;Sen-Long Yang .Design and Calculations of Gas Property Parameters for Constant Area Lance under Conditions of Friction Flow with Heating[J].Ironmaking Conference Proceedings,2000(0):571-582. |
[19] | M Sano;K. Mori .Fluid Flow and Mixing Characteristics in a Gas-stirred Molten Metal Bath[J].Transactions of the Iron and Steel Institute of Japan,1983,23(02):169-175. |
[20] | M P Schwarz .Buoyancy and Expansion Power in Gas-agitated Baths[J].IgIJ Int,1991,30:947-951. |
[21] | Hirohiko TOKUNAGA;Manabu IGUCHI;Hideo TATEMICHI .Heat Transfer between Bubbles and Molten Wood's Metal[J].ISIJ International,1995(1):21-25. |
[22] | Y Ozawa;K. Mori .Characteristics of Jetting Observed in Gas Injection into Liquid, Trans[J].ISIJ International,1983,23:764-768. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%