简要介绍了钢液RH喷粉脱硫的有关方法,分析和综述了相应的粉剂、传质研究及动力学模型等.指出:以冶金反应工程学的观点、原理和方法深入研究钢液RH精炼喷粉脱硫过程无疑具有理论意义和实践价值.
参考文献
| [1] | Y Mizukami.RH-Injection Process Combines Degassing and Powder Injection[J].Steel Times International,1986:142. |
| [2] | Y.Takemura.The Development of RH-Injection Technology[A].AAchen,1987:245-255. |
| [3] | T Hatakeyama;Y.Mizukami;K.Azuma et al.Development of a New Secondary Refining Process Using an RH Vacuum Degasser[J].Ironmaking and Steelmaking,1989,15:23. |
| [4] | R K Hanna;R I Blake;M S Millman .Water Modelling to Aid Improvement of Degasser Performance for Production of Ultralow Carbon Interstitial Free Steels[J].Ironmaking and Steelmaking,1994,21(01):37. |
| [5] | Y Kato;H.Nakato;T.Fuji et al.Fluid Flow in Ladle and Its Effect on Decarburization Rate in RH Degasser[J].ISIJ International,1993,33(10):1088. |
| [6] | Xu Kuangdi.The Circulation Characteristic and Stirring Efficiency in RH Injection Ladle[A].Tokyo.Japan.ISIJ,1982 |
| [7] | J.-H. Wei;M. Wang;N.-W. Yu .Mass transfer characteristics between molten steel and particles in RH-PTB refining[J].Ironmaking & Steelmaking: Products and applications,2001(6):455-464. |
| [8] | 冈田泰和;真屋敬一 .RH粉体上吹精炼法の开发[J].铁と钢(日本),1994,80:9. |
| [9] | 远藤公一 .多功能二次精炼技术RH喷粉法的开发[J].制铁研究(日本),1989,335:20. |
| [10] | K Endoh et al.The Development of Multifunction Secondary Refining Techlonogy[J].Nippon Steel Technical Report,1990,4:45. |
| [11] | 冈田泰和;深川信;家田幸冶 等.RH粉体上吹硫法の开发[J].CAMP-ISIJ,1992,5:1238. |
| [12] | Y Sano;N Yamaguchi;T Adachi.Mass Transfer Coefficient for Suspending Particles in Agitated Vessel and Bubble Columns[J].Journal of Chemical Engineering of Japan,1974(07):255-261. |
| [13] | J Y Davis.Turbulence Phenomena[M].New York.Academic Press,1972:148. |
| [14] | J -H Wei;S J Zhu;N -W Yu .Kinetic model of desulphurization by powder injection and blowing in RH refining of molten steel[J].Ironmaking and Steelmaking,2000,27(02):129-137. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%