分析讨论了烘烤硬化钢板的BH值与预应变量关系的不同观点,研究了成分为0.11C-1.67Mn-1.19Si的DP和TRIP钢板的BH值与预应变量的关系,并尝试做出合理的解释.
参考文献
| [1] | Cottrell A H;Bilby B A .Dislocation theory of yielding and strain ageing of iron[J].Proceedings of the Physical Society,1949,A62(01):49-62. |
| [2] | Zhao J.Z.;Cooman B.C. .Kinetics of Cottrell atmosphere formation during strain aging of ultra-low carbon steels[J].Materials Letters,2000(6):374-378. |
| [3] | 赵九洲,B.C.De Cooman.低碳钢应变时效过程模拟[J].金属学报,2002(01):27-30. |
| [4] | 焦轶民;傅玉生;杨宝森.国产烘烤硬化钢板BH值的检测与探讨[J].天津汽车,1994(04):36-40. |
| [5] | 李东升,李雪峰,周贤宾.汽车板材烘烤硬化特性的研究[J].金属成形工艺,2001(02):14-17. |
| [6] | 关小军;王先进;刘月乔 .预变形和烘烤条件对ELC-BH钢板性能的影响[J].钢铁,1994,29(07):41-44. |
| [7] | De A.K.;Blauwe K.D. .Effect of dislocation density on the low temperature aging behavior of an ultra low carbon bake hardening steel[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2000(1/2):405-410. |
| [8] | De A K;Vandeputte S;De Cooman B C .Static strain aging behavior of ultra Iow carbon bake hardening steel[J].Scripta Materialia,1999,41(08):831-837. |
| [9] | 江海涛,康永林,王全礼,熊爱明.高强度汽车板的烘烤硬化特性[J].钢铁研究,2006(01):54-57. |
| [10] | Aleksy A.Konieczny,徐宏伟.汽车用双相钢成形性能评价[J].世界钢铁,2003(01):34-38. |
| [11] | 朱晓东,王利,俞宁峰,季思凯,王聪.过时效和平整对冷轧双相钢板强度、塑性及烘烤硬化性的影响[J].钢铁研究学报,2003(06):47-50. |
| [12] | 马鸣图.双相钢的时效和回火[J].国外金属材料,1985(02):1-9. |
| [13] | 马鸣图;吴宝榕.双相钢-物理和力学冶金[M].北京:冶金工业出版社,1988 |
| [14] | 刘天模;何泽福;马鸣图 .双相钢双屈服特性研究[J].重庆大学学报(自然科学版),1992,15(03):50-55. |
| [15] | 冯峰;张丙;万晓景 .合金元素对双相钢(F+M)时效行为的影响[J].金属热处理学报,1993,14(04):12-16. |
| [16] | Z.C. Wang;S.J. Kim;C.G. Lee .Bake-hardening behavior of cold-rolled CMnSi and CMnSiCu TRIP-aided steel sheets[J].Journal of Materials Processing Technology,2004(1/3):141-145. |
| [17] | 王利,金蕾,夏启,徐祖耀.冷轧TRIP钢的特性及应用[J].汽车工艺与材料,2004(06):72-74. |
| [18] | Furnemont Q;Kempf M;Jacques P J et al.On the Measurment of Nanohardness of the Constitutive Phases of TRIP-assisted Multiphase Steels[J].Materials Science and Engineering,2002,A328:26-32. |
| [19] | 赵金福;明旭光;欧立晋 等.控轧工艺对TRIP薄板组织与性能的影响[J].钢铁,1992,27(11):24-27. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%