采用喷射成形技术制备Al-Si系合金可以明显细化初生Si相和显微组织,得到低偏析、高致密度、低含氧量且具有高性能的合金材料.主要介绍喷射成形技术的基本原理及其在Al-Si系合金的应用与研究现状,分析了目前存在的问题并提出了今后的发展方向.
参考文献
| [1] | Deuls R L;Subramanian C;Yellop J M .Abrasive wear of aluminium composites-A review[J].Wear,1996,201(1-2):132-144. |
| [2] | Hogg SC;Lambourne A;Ogilvy A;Grant PS .Microstructural characterisation of spray formed Si-30Al for thermal management applications[J].Scripta materialia,2006(1):111-114. |
| [3] | Cui, CS;Schulz, A;Matthaei-Schulz, E;Zoch, HW .Characterization of silicon phases in spray-formed and extruded hypereutectic Al-Si alloys by image analysis[J].Journal of Materials Science,2009(18):4814-4826. |
| [4] | YUE WU;WILLIAM A. CASSADA;ENRIQUE J. LAVERNIA .Microstructure and Mechanical Properties of Spray-Deposited Al-17Si-4.5Cu-0.6Mg Wrought Alloy[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,1995(5):1235-1247. |
| [5] | 向学渊,何国求,莫德锋,胡正飞,刘兵.Al-Si系铸造合金微观结构对疲劳寿命影响的研究进展[J].上海金属,2009(03):49-53. |
| [6] | Alan Leatham .Commercial Spray Forming: exploiting the metallurgical benefits[J].Materials World,1996(6):317-320. |
| [7] | Ha T K;Park W J;Ahn S et al.Fabrication of spray-formed hypereutectic Al-25Si alloy and its deformation behaviour[J].Journal of Materials Processing Technology,2002,130-131:691-695. |
| [8] | Chiang CH;Tsao CYA .Si coarsening of spray-formed high loading hypereutectic Al-Si alloys in the semisolid state[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2005(1/2):263-270. |
| [9] | 张济山;熊柏青;崔华.喷射成形快速凝固技术:原理与应用[M].北京:科学出版社,2008:333-336,346-348. |
| [10] | C. Cui;A. Schulz;K. Schimanski;H.-W. Zoch .Spray forming of hypereutectic Al-Si alloys[J].Journal of Materials Processing Technology,2009(11):5220-5228. |
| [11] | 霍光,匡星,况春江,邓德国.喷射成形工艺的理论研究进展[J].粉末冶金技术,2008(05):382-389. |
| [12] | 张济山;熊柏青;崔华.喷射成形快速凝固技术:原理与应用[M].北京:科学出版社,2008:29-39. |
| [13] | Xiong Baiqing;Zhang Yongan;Wei Qiang;Shi Likai;Xie Changan;Shang Chengjia;He Xinlai .The study of primary Si phase in spray forming hypereutectic Al-Si alloy[J].Journal of Materials Processing Technology,2003(1/3):183-186. |
| [14] | 张永安,刘红伟,朱宝宏,熊柏青,石力开,张济山,陈美英.新型60Si40Al合金封装材料的喷射成形制备[J].中国有色金属学报,2004(01):23-27. |
| [15] | 李超,彭超群,余琨,王日初,杨军,刘溶.喷射沉积70%Si-Al合金电子封装材料的组织与性能[J].中国有色金属学报,2009(02):303-307. |
| [16] | Hu H M;Lee Z H;White D R et al.On the evolution of porosity in spray-deposited tool steels[J].Metallurgical and Materials Transactions,2000,A31:725-735. |
| [17] | Liu H M;Lavernia E J;Rangel R H .Modeling of molten droplet impingement on a non-flat surface[J].Acta Metallurgica Et Materialia,1995,43:2053-2072. |
| [18] | Cai W D;Lavernia E J .Modeling of porosity during spray forming[J].Materials Science and Engineering,1997,A226-228:8-12. |
| [19] | Srivastava V C;Mandal R K;Ojha S N .Evolution of microstructure in spray formed Al-18%Si alloy[J].Materials Science and Engineering A,2004,383:14-20. |
| [20] | Seok H K;Lee J C;Lee H I .Extrusion of spray-formed Al-25Si-X composites and their evaluation[J].Journal of Materials Processing Technology,2005,160:354-360. |
| [21] | Srivastava VC.;Ojha SN.;Mandal RK. .Microstructure and mechanical properties of Al-Si alloys produced by spray forming process[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2001(0):555-558. |
| [22] | C.-H. Chiang;Chi Y.A. Tsao .Microstructures and mechanical properties of spray-formed and squeeze-cast Al-25Si-0.89Cu-1.0Ni-0.84Mg alloys in solutionized and aged conditions[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2006(1/2):90-98. |
| [23] | F. Wang;B. Yang;X.J. Duan .The microstructure and mechanical properties of spray-deposited hypereutectic Al-Si-Fe alloy[J].Journal of Materials Processing Technology,2003(1/3):191-194. |
| [24] | Feng Wang;Jishan Zhang;Baiqing Xiong .Effect of Fe and Mn additions on microstructure and mechanical properties of spray-deposited Al-20Si-3Cu-1 Mg alloy[J].Materials Characterization,2009(5):384-388. |
| [25] | Wang F;Liu H M;Ma Y J et al.Effect of Si content on the dry sliding wear properties of spray-deposited Al-Si alloy[J].Materials & Design,2004,25:163-166. |
| [26] | Srivastava, VC;Rudrakshi, GB;Uhlenwinkel, V;Ojha, SN .Wear characteristics of spray formed Al-alloys and their composites[J].Journal of Materials Science,2009(9):2288-2299. |
| [27] | Leatham A G.Spray forming:alloys,products,markets[A].Baltimore,USA,1999 |
| [28] | 马鸣图,石力开,熊柏青,张永安,唐新民.喷射沉积成型铝合金在汽车发动机缸套上的应用[J].汽车工艺与材料,2001(02):16-19. |
| [29] | 张济山.新型喷射成形轻质、高导热、低膨胀Si-Al电子封装材料[J].材料导报,2002(09):1-4. |
| [30] | WEI Yan-guang;XIONG Bai-qing;ZHANG Yong-an;LIU Hong-wei;WANG Feng;ZHU Bao-hong .Property measurements on spray formed Si-Al alloys[J].Transactions of Nonferrous Metals Society of China,2007(2):368-372. |
| [31] | 陈美英,胡敦芫,于月光,曾克里,仁先京,杨滨,张济山.雾化喷射成形制备的硅-铝合金的组织及其性能[J].热加工工艺,2005(02):29-31. |
| [32] | 王晓峰,赵九洲,田冲.喷射沉积制备新型电子封装材料70%Si-Al的研究[J].金属学报,2005(12):1277-1279. |
| [33] | Wang F;Xiong B Q;Zhang Y A.Microstructure,thermo-physical and mechanical properties of spray-deposited Si-30Al alloy for electronic packaging application[J].Materials Characterization,2008(59):1455-1457. |
| [34] | Yanguang Wei,Baiqing Xiong,Yongan Zhang,Hongwei Liu,Feng Wang,Baohong Zhu.Effect of P/M value on the preforms and microstructures of spray formed 70Si30Al alloy[J].北京科技大学学报（英文版）,2007(02):141-145. |
| [35] | Kun Yu;Chao Li;Richu Wang;Jun Yang .Production and Properties of a Spray Formed 70%Si-Al Alloy for Electronic Packaging Applications[J].Materials transactions,2008(3):685-687. |
| [36] | Yu K;Li C;Yang J et al.Production and Properties of a 90%Si-Al Alloy for Electronic Packaging Applications[J].Materials Science Forum,2009,610-613:542-545. |
| [37] | 杨根仓;刘永长;吕衣礼.制备高强度高导电材料的新途径[J].材料导报,1996(04):28-29. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%