Fe-3.2%Si合金通过真空退火发生二次再结晶,最终可形成立方织构电工钢.其中初次再结晶后的晶粒是发生二次再结晶的晶核.通过电子背散射衍射(EBSD)技术和取向成像显微(OIM)技术研究了硅钢初次再结晶对最终立方织构形成的影响.通过冷轧压下量70%和不同退火温度的工艺处理,研究了退火温度对初次再结晶的影响;发现在低温650 ℃下初次再结晶,形成的初次再结晶晶核有利于最终形成立方织构.
参考文献
| [1] | Walter J L;Hibbard W R;Fiedler H C et al.Magnetic properties of cube textured silicon-iron magnetic sheet[J].Journal of Applied Physics,1985,29(03):363-365. |
| [2] | 周邦新.铁硅合金中形成立方织构的有关问题[J].宝钢技术,2000(05):53-58. |
| [3] | Assmus F;Boll R;Ganz D et al.Ueber eisen-silizium mit wuerfeltexture[J].Zeitschrift fur Metallkunde,1957,48(06):341-349. |
| [4] | 罗阳;吕其春 .电工钢研究中蚀坑技术的运用[J].金属学报,1979,15(02):235. |
| [5] | 吴学亮,刘立华,史文,李莉娟,贾金龙,翟启杰.取向硅钢初次再结晶组织结构的研究[J].上海金属,2010(03):28-33. |
| [6] | T. Tomida;S. Uenoya .Cube oriented 3%Si-1%Mn soft magnetic steel sheets with fine grain structure[J].IEEE Transactions on Magnetics,2001(4 Pt.1):2318-2320. |
| [7] | Tomida T;Uenoya S;Sano N .Doubly oriented magnetic steel sheet and method for manufacturing the same[P].US,5,948,180,1999-09-07. |
| [8] | Mao W.Evolution of microstructure and {001}《110》 texture in electrical steel sheet[A].上海,2003:109-114. |
| [9] | Dumn C G;Walter J L .Suface Energies and Other Surface Effects Relating to Secondary Recrystallization Textures in High-Purity Iron,Zone-Refined Iron,and 0.6 Pct Si-Fe[J].Transactions of the Metallurgical Society of AIME,1962,224:518. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%