对高温时效条件下Fe-12.4Cr-0.13C(wt%)合金中碳化物的析出行为进行了计算与研究.研究中采用Thermo-Calc(R)软件对碳化物的析出行为进行了热力学与动力学计算,而后采用HRTEM结合Image J图像分析软件表征了组织中碳化物的类型及粒径分布.结果表明:Fe-12.4Cr-0.13C合金经780℃长时间时效处理后,组织中析出M23C6型碳化物,当时效时间由10 h增加到100 h后,其平均等效粒径由361 nm增大到495 nm,具有明显的粗化行为.
参考文献
[1] | 雍歧龙.钢铁材料中的第二相[M].北京:冶金工业出版社,2006:23-25. |
[2] | Qing Chen;Johan Jeppsson;John Agren .Analytical treatment of diffusion during precipitate growth in multicomponent systems[J].Acta Materialia,2008(8):1890-1896. |
[3] | Lu Xiangang;Strandlund Henrik;Chen Qing.Simulation of Precipitation in Alloys[A].Jeju Island,Korea,2007 |
[4] | Svoboda J;Fischer FD;Fratzl P;Kozeschnik E .Modelling of kinetics in multi-component multi-phase systems with spherical precipitates - I: Theory[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2004(1/2):166-174. |
[5] | Liu Zikui;H(o)glund Lars;J(o)nsson Bj(o)rn et al.Experimental and theoretical study of cementite dissolution in an Fe-Cr-C alloy[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1991,22A:1745-1752. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%