板坯结晶器内钢液流动会影响铸坯的质量,控制和优化结晶器内钢液流动对于提高铸坯质量具有重要意义.电磁控制技术已经成为控制和优化结晶器内钢液流动的重要技术.论述了结晶器内钢液流动对铸坯质量的影响,并介绍了结晶器内钢液流动的电磁场控制技术和特点,以及在钢厂的应用.
参考文献
| [1] | Hintikka S;Konttinen J;Leiviska K.Optimization of Molten Steel Flow in Continuous Casting Mold[A].Toronto,Ontario;Canada,1992:887-891. |
| [2] | 干勇;仇圣桃;萧泽强.连续铸钢过程数学物理模拟[M].北京:冶金工业出版社,2001:4. |
| [3] | Gupta D;Lahiri A K .Water-Modeling St udy of the Surface Disturbances in Continuous Slab Caster[J].Metallurgical and Materials Transactions B:Process Metallurgy and Materials Processing Science,1994,25(02):227-233. |
| [4] | Thomas Honeyands;Joe Herbertson .Flow dynamics in thin slab caster moulds[J].Steel Research,1995(7):287-293. |
| [5] | 于会香,张炯明,王万军,王新华,杨振亚,杨立新.板坯连铸浸入式水口出口速度对结晶器流场影响的数值模拟[J].北京科技大学学报,2002(05):492-496. |
| [6] | 贾光霖;庞维成.电磁冶金原理和工艺[M].沈阳:东北大学出版社,2003:143-182. |
| [7] | 韩至成.电磁冶金学[M].北京:冶金工业出版社,2001:99-155. |
| [8] | Kittaka S;Watanabe K;Kanki T et al.Nippon Steel In-Mold Electromagnetic Stirrer "M-EMS” for Slab Cater[J].NIPPON STEEL TECHNICAL REPORT,2002,86(07):68-72. |
| [9] | Junji NAKASHIMA;Akihito KIYOSE;Yasuhiko OHTANI .Improvement of Slab Surface Quality with In-mold Electromagnetic Stirring[J].NIPPON STEEL TECHNICAL REPORT,2002(86):61-67. |
| [10] | Kensuke OKAZawa;takehiko toh;Jun Fukuda .Fluid Flow in a Continuous Casting Mold Driven by Linear induction Motors[J].ISIJ International,2001(8):851-858. |
| [11] | 朱诚意,李光强,饶江平,彭其春.连铸薄板坯的质量缺陷及其改善措施研究[J].上海金属,2006(02):15-20. |
| [12] | 钟云波,孟宪俭,倪丹,任忠鸣,邓康,徐匡迪.旋转磁场净化钢液的实验研究[J].上海金属,2006(02):9-14. |
| [13] | Nagai J;Suzuki K I;Kojima S et al.Steel Flow Control in a High Speed Continuous Slab Caster Using an Electromagnetic Brake[J].Iron & Steel Engineers,1984,61(05):41-47. |
| [14] | LEI Hong,ZHU Miao-yong,HE Ji-cheng.Optimum Position of Electromagnetic Brake on Slab Caster[J].钢铁研究学报(英文版),2003(02):21-26. |
| [15] | 毛斌 .连铸电磁冶金技术,第四讲:板坯连铸结晶器电磁制动技术[J].连铸,1999,12:37-42. |
| [16] | Lehman A;Tallback G;Rullgard A .Electromagnetic Braking Improves Steel Quality in Continuous Casting[J].Continuous Casting,1996,1:4-9. |
| [17] | Takatani K;Nakai K;Kasai N et al.Analysis of Heat Transfer and Fluid Flow in the Continuous Casting Mold with Electromagnetic Brake[J].ISIJ International,1989,29(12):1063-1068. |
| [18] | Idogawa A;Sugizawa M;Takeuchi S et al.Control of molten steel flow in continuous casting mold by two static magnetic fields imposed on whole width[J].Materials Science and Engineering,1993,173(20):293-297. |
| [19] | Lehman A F;Tallback G R;Rollberg S G.Fluid Flow Control in Continuous Casting Using Various Configuration of Static Magnetic Fields[A].Nagoya,ISIJ,1994:372. |
| [20] | Kubota J;Kubo N;Ishii T.Steel flow control in continuous slab caster mold by traveling magnetic field[J].NKK Technical Review,2001 |
| [21] | Noriko KUBO;Jun KUBOTA;Makoto SUZUKI;Toshio ISHII .Molten Steel Flow Control under Electromagnetic Level Accelerator in Continuous Casting Mold[J].ISIJ International,2007(7):988-995. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%