为解决不可降解的废弃塑料类包装材料对环境造成的污染,以稻草纤维、淀粉为主要原料制备了生物质缓冲包装材料,采用正交实验方法研究了生物质缓冲包装材料纤维与淀粉质量比、塑化剂、活性剂和发泡剂含量等对材料抗压强度的影响,结果表明,各因素对材料抗压强度影响的主次顺序为塑化剂＞纤维与淀粉质量比＞发泡剂＞活性剂.塑化剂含量为12％、纤维与淀粉质量比为2∶5、发泡剂含量为0.1％、活性剂含量为0.3％时其抗压强度可达0.94MPa.研究了塑化剂含量、纤维与淀粉质量比对材料缓冲性能的影响,随着塑化剂含量和纤维与淀粉质量比增大,材料缓冲系数呈现先降低后升高的趋势,在纤维与淀粉质量比为2∶5、塑化剂含量为12％时,材料的缓冲系数最小,缓冲性能最好.与EPS(发泡聚苯乙烯)和EPE(发泡聚乙烯)等包装材料缓冲性能和回弹性能的比较表明生物质缓冲包装材料完全可以替代EPS和EPE等缓冲包装材料.
参考文献
| [1] | Marechal V;Rigal L .Characterization of by-products of sunflower culture - commercial applications for stalks and heads[J].Industrial crops and products,1999(3):185-200. |
| [2] | M. O. Rutiaga;L. J. Galan;L. H. Morales;S. H. Gordon;S. H. Imam;W. J. Orts;G. M. Glenn;K. A. Nino .Mechanical Property and Biodegradability of Cast Films Prepared from Blends of Oppositely Charged Biopolymers[J].Journal of polymers and the environment,2005(2):185-191. |
| [3] | Shey, J;Imam, S H;Glenn, G M;Orts, W J .Properties of baked starch foam with natural rubber latex.[J].Industrial crops and products,2006(1):34-40. |
| [4] | C. N. Ludvik;N;Ludvik;G;M;Glenn;A;P;Klamczynski;D;F;Wood;G. M. Glenn;A. P. Klamczynski;D. F. Wood .Cellulose Fiber/bentonite Clay/biodegradable Thermoplastic Composites[J].Journal of polymers and the environment,2007(4):251-257. |
| [5] | Jia X;Li J;Li F.Biomass biodegradable food boxes and hot temperature field of structural optimization[A].广东深圳,2011 |
| [6] | Jia X;Li J;Li F.The configuration design and biodegradation test of biodegradable material dishware[A].广东深圳,2011 |
| [7] | She Binying .Study on properties of cushioning material made plant fiber with network structure[D].Fuzhou:Fujian Agriculture and Forestry University,2007. |
| [8] | 李媛媛,戴宏民.植物纤维缓冲制品的改性及发泡技术探讨[J].重庆工商大学学报（自然科学版）,2008(03):281-285. |
| [9] | 何蕊,陈太安,戈应仓.麻秆芯纤维发泡缓冲包装材料的制备工艺[J].西南林业大学学报,2011(03):73-76. |
| [10] | 王古月,时君友,叶升友.葵花秸秆髓料缓冲包装材料的制备和性能[J].东北林业大学学报,2010(08):84-86. |
| [11] | 张东辉,何春霞,刘军军.稻秸秆粉/聚丙烯复合材料力学性能[J].农业工程学报,2010(07):380-384. |
| [12] | 何春霞,顾红艳,薛盘芳.四种植物纤维粉/聚丙烯复合材料应用性能[J].农业工程学报,2010(02):381-384. |
| [13] | 郭安福,鹿海洋,李剑峰,李方义,魏宝坤,李建勇,王霞.植物纤维淀粉餐盒力学性能仿真及试验验证[J].农业工程学报,2010(07):91-95,封4. |
| [14] | 郭安福,李剑峰,李方义,魏宝坤.植物纤维淀粉餐盒的降解性能研究[J].功能材料,2009(11):1929-1932. |
| [15] | Giannoulis, A.;Mistriotis, T.;Briassoulis, D. .Experimental and numerical investigation of the airflow around a raised permeable panel[J].Journal of Wind Engineering and Industrial Aerodynamics: The Journal of the International Association for Wind Engineering,2010(12):808-817. |
| [16] | E. Rudnik;D. Briassoulis .Comparative Biodegradation in Soil Behaviour of twoBiodegradable Polymers Based on Renewable Resources[J].Journal of polymers and the environment,2011(1):18-39. |
| [17] | 鲁海宁,贾秀杰,李剑峰,李方义,王霞,李建勇.全降解餐盒成型模具热分析与优化[J].模具工业,2010(03):45-49. |
| [18] | Lu Haining .Structural analysis and optimization of biodegradable dishware mould[D].Ji' nan:Shandong University,2010. |
| [19] | Liu Gang .Research on optimization technology for simulation model of biodegradable production line[D].济南:山东大学,2010. |
| [20] | Guo Anfu;Li Jianfeng;Li Fangyi.Design of the full biodegradable and single-use dishware mold based on automatic ejection technology[A].United States,2008:456-457. |
| [21] | 郭安福,李剑峰,李方义,魏宝坤.基于模糊层次分析法的可降解包装材料绿色度评价[J].功能材料,2010(03):401-405. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%