欢迎登录材料期刊网

材料期刊网

高级检索

以 Fe73.5 Cu1 Nb3 Si13.5 B9粉体为复合相,硅橡胶为基体,制得粉体含量为83%(质量分数)、厚度200μm的复合薄膜;采用 TH2816LCR 数字电桥测试频率1kHz下薄膜的阻抗Z 随压应力σ的变化情况,用LYYL-500N高档型微机控制压力试验机对薄膜体系进行程序控制加载;薄膜采用电容方式连接。研究了复合薄膜在压应力连续加载/卸载和压应力保持加载/卸载状况下的力敏特性。研究表明,复合薄膜在连续加载/卸载速度≤0.5mm/min 和保压加载/卸载条件下,当测试频率1kHz、压应力0.2~1.0MPa 时,具有良好的力敏稳定性和灵敏性。随着应力σ增大,阻抗Z 呈非线性下降,SI%值为6%~23%,灵敏精度k值为2~0.2,测试标准偏差稳定在0.02~0.05,薄膜对于<0.3MPa应力更加灵敏。增加测试频率可以提高薄膜体系的力敏灵敏度。在压应力0.2~1.0MPa范围内,薄膜弹性后效现象显著,导致薄膜加载Z-σ曲线与卸载曲线不重合。

Composite film was prepared by Fe73.5 Cu1 Nb3 Si13.5 B9 powder as compound phase and silicone rubber as matrix phase.The content of powder was 83% and the thickness of film was 200μm.Impedance-Z and stress-σof film were tested by TH2816LCR digital bridge when frequency was 1kHz.LYYL-500N high-grade type microcomputer control pressure testing machine was used to program control loading.Film system was con-nected by capacitance way,the force-sensitive properties were studied when stress loading and unloading was continuous or retentive.The results show that when frequency was 1kHz and stress was 0.2-1.0MPa,compos-ite film has excellent force-sensitive stability and sensitivity in condition that the speed of continuous loading and unloading was low 0.5mm/mim and loading and unloading was retentive.The impedance was declining nonlin-ear with the stress was increasing.The value of SI% was 6%-23%,the value of sensitivity-k was 2-0.2,the standard deviation was stability in 0.02-0.05.The film was more sensitive when stress was low to 0.3MPa.In-creasing test frequency can improve the sensitivity of film.When stress was between 0.2-1.0MPa the elastic af-tereffect phenomenon was obvious,which leads to the loading Z-σcurve and unloading was not coincident.

参考文献

[1] 郭沛飞,贾振元,杨兴,齐薇.压磁效应及其在传感器中的应用[J].压电与声光,2001(01):26-29.
[2] 李塘华 .橡胶基软磁复合材料薄膜的制备及其压磁性能研究[D].南昌大学,2007.
[3] 马广斌,朱正吼,李塘华,夏小鸽.FeCuNbSiB/硅橡胶磁性复合薄膜制备及压磁性能研究[J].功能材料,2007(05):737-739.
[4] 李塘华,朱正吼,马广斌,夏小鸽.一种新型压磁薄膜[J].功能材料,2007(11):1787-1789.
[5] 夏小鸽,朱正吼,马广斌.退火工艺对FeCuNbSiB非晶带材压磁效应的影响[J].功能材料,2006(12):1881-1883.
[6] 石延平,周庆贵,臧勇.一种基于铁基非晶态合金压磁效应的膜盒式压力传感器[J].传感技术学报,2011(04):503-507.
[7] 石延平,臧勇,周庆贵.基于铁基非晶态合金的非接触半套环式扭矩传感器的研究[J].机械工程学报,2012(12):13-17.
[8] 万珍珍 .铁基非晶合金压磁性能研究[D].南昌大学,2008.
[9] 马广斌,朱正吼,黄渝鸿,夏小鸽,李塘华.非晶FeCuNbSiB带材压磁性能的特点[J].稀有金属材料与工程,2008(02):286-288.
[10] 周佳,朱正吼,李晓敏,黄渝鸿,乔宝英.多角形非晶粉/硅橡胶复合薄膜压磁性能研究[J].功能材料,2012(18):2519-2522.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%