将超声波和复合电沉积技术相结合制备了Cu-SiC复合电极材料，利用 SiC 颗粒高熔点、高导电性的特点探索对烧结 NdFeB 永磁体电火花的可加工性。研究了 Cu-SiC 电极对 NdFeB 永磁体加工效率、加工效果的影响规律。结果表明 SiC颗粒在火花放电中使电场产生畸变，降低了击穿电压，火花痕迹大而浅，表面粗糙度降低；同时提高了加工效率，降低了电极损耗。
Cu-SiC composition electrode was made by using electrodepositing method.Electrical discharge ma-chining of sintered NdFeB magnet was studied by using high melting point and good conductivity of SiC.Machi-ning efficiency,quality and electrode erosion resistance were studied.Results show that Cu-SiC electrode could increase material removal rate,improve surface quality and decrease surface roughness and erosion resistance.
参考文献
| [1] | Sagawa M;Fujimura S;Togawa N et al.New material for permanent magnets on a base of Nd and Fe[J].Jour-nal of Applied Physics,1983,55(06):2083-2087. |
| [2] | Croat J J;Herbst J F;Lee R W et al.Pr-Fe and Nd-Fe-based materials:a new class of high-performance perma-nent magnets[J].Journal of Applied Physics,1983,55(06):2078-2082. |
| [3] | Vial F.;Joly F.;Nevalainen E.;Sagawa M.;Hiraga K.;Park KT. .Improvement of coercivity of sintered NdFeB permanent magnets by heat treatment[J].Journal of Magnetism and Magnetic Materials,2002(2):1329-1334. |
| [4] | 倪俊杰 .高抗蚀性烧结钕铁硼制备与性能研究[D].浙江大学,2011. |
| [5] | 任升峰,张建华.Nd-Fe-B烧结永磁材料的车削加工研究[J].中国机械工程,2006(06):555-558. |
| [6] | Fu Xiuzhuo;Zhang Qinhe;Bao Guanghua .MRR analysis on technology of piezoelectric self-adaptive micro-EDM[J].Procedia Engineering,2011,16:477-485. |
| [7] | Jayakumar Narasimhan;Zuyuan Yu;Kamlakar P. Rajurkar .Tool Wear Compensation and Path Generation in Micro and Macro EDM[J].Journal of manufacturing processes,2005(1):75-82. |
| [8] | Xiaodong Yang;Chunwei Xu;Masanori Kunieda .Miniaturization of WEDM using electrostatic induction feeding method[J].Precision Engineering,2010(2):279-285. |
| [9] | Lin Gu;Lei Li;Wansheng Zhao;K. P. Rajurkar .Electrical discharge machining of Ti6Al4V with a bundled electrode[J].International Journal of Machine Tools & Manufacture: Design, research and application,2012(1):100-106. |
| [10] | Kuen-Ming Shu;G. C. Tu .FABRICATION AND CHARACTERIZATION OF Cu-SiC_p COMPOSITES FOR ELECTRICAL DISCHARGE MACHINING APPLICATIONS[J].Materials and Manufacturing Processes,2001(4):483-502. |
| [11] | 吴蒙华,李智,夏法锋,陈丽燕.超声电沉积制备纳米金属陶瓷复合镀层工艺[J].机械工程材料,2005(08):58-61. |
| [12] | 李丽,王东,牛宗伟,李志永.一种提高烧结NdFeB永磁体耐蚀性的加工方法的研究[J].功能材料,2007(08):1273-1275. |
| [13] | 李丽,殷凤仕,牛宗伟,袁光明.电沉积Cu基SiC复合电极材料[J].功能材料,2013(08):1188-1190. |
| [14] | 张龙,赵福令,吕战竹,杨连文,郭东明.NAK80模具钢混粉电火花加工的实验研究[J].电加工与模具,2003(01):17-19. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%