欢迎登录材料期刊网

材料期刊网

高级检索

采用 SEM、AFM、FT-IR、XRD 和 TGA 对新型芳纶材料对位芳纶沉析纤维的表面形貌、化学结构、结晶程度和热学特性4个方面进行了分析检测,为研究对位芳纶沉析纤维的结构性能奠定实验基础,有利于其作为复合增强材料的广泛应用。结果表明,对位芳纶沉析纤维是非粒状且尺寸较小,外形上既像纤维又像薄膜,表面粗糙,形态柔顺;纤维具有仲酰胺结构特征;纤维结晶度为28.55%,非晶化的成分较多,且晶粒尺寸较小;纤维初始分解温度为490℃, TG10%为550℃,分子链结构稳定,热学性能优异。

The surface morphology,chemical structure,degree of crystallinity and thermal properties of Para-aramid fibrid were studied by using SEM,AFM,FT-IR,XRD and TGA.This paper was used to offer an ex-perimental foundation for promoting its extensive use as one kind of composite reinforced materials.Results in-dicated that Para-aramid fibrid was non-granular and small-sized,it had a fiber or film looking,roughness sur-face,supple shape.The fiber had a secondary amide structure,and its crystallinity was 28.55 percent.As a re-sult,it contained amounts of amorphous compositions,and the crystalline size in fibers was tiny.The initial de-composition temperature of fiber was 490 ℃,TG10% was 550 ℃,thus demonstrated its stable molecular chain structure and excellent thermal properties.

参考文献

[1] Long Han .Study of the rheological properties of Nomex fibrids[D].WSA:College of Engineering and Mineral Re-sources at West Virginia University,2001.
[2] Li Jinbao;Zhang Meiyun;Wu Yangyu .Structure and shaps of PPTA fiber and its papermaking performance[J].China Pulp & Paper,2004,23(10):56-59.
[3] Wang J;Chen P;Li H;Li W;Wang BC;Zhang CS;Ren N .Surface characteristic of poly(p-phenylene terephthalamide) fibers with oxygen plasma treatment[J].Surface and Interface Analysis: SIA: An International Journal Devoted to the Development and Application of Techniques for the Analysis of Surfaces, Interfaces and Thin Films,2008(9):1299-1303.
[4] 梁晶晶,邹新国,邵勤思,孙晋良,唐志勇.镀银导电芳纶纤维的制备及其性能研究[J].功能材料,2012(20):2757-2762.
[5] Zhang Sufeng .Correlation between the interface and structure characteristics of aramid fiber and properties for sheetmaking[D].Xi'an:Shaanxi University of Science & Technology,2010.
[6] 王启芬,王成国,王延相,杨茂伟,于美杰.PAN纤维的结构对纤维强度的影响[J].功能材料,2006(11):1787-1789.
[7] Mei Yunzhang;Rui Huang;Bin Yang et al.Effect of PP-TA fiber morphology on the performance of paper-based functional materials[J].Advanced Materials Research,2011,236-238:1453-1456.
[8] Yan Bin .Characterization and research of PPTA-pulp proper-ties and structure and sheet forming performance[D].Xi'an:Shaanxi University of Science &Technology,2013.
[9] Lee K G;Barton R J;Schultz J M .Structure and property development in poly(p-phenylene terephthalamide)dur-ingheat treatment under tension[J].JOURNAL OF POLYMER SCIENCE PART B:POLYMER PHYSICS,1995,33(01):1-14.
[10] 陈涛,曾庆轩,冯长根.弱酸离子交换纤维的结构表征与性能研究[J].功能材料,2007(10):1605-1609.
[11] Zhang Shuhui;Yan Milin;Liang Guozheng et al.Com-parative study on body performance of two para-aramid fiber[J].Plastics Technology,2010,38(12):52-56.
[12] Anthony P Gies;Michal Kliman .Characterization of branching in aramid polymers studied by MALDI-ion mobility/mass spectrometry[J].MACROMOLECULES,2008,41:8299-8301.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%