欢迎登录材料期刊网

材料期刊网

高级检索

采用水热法制备了不同掺杂浓度的 WO 3∶Ti 纳米晶粒,并在350℃下退火1 h.采用 SEM、XRD 表征了材料的形貌与结构,并测试了用退火前后合成材料制成的薄膜气敏传感器件在200℃下对NO 2的气敏性能.结果表明,Ti 掺杂可以有效抑制WO 3晶粒的生长,减小晶粒尺寸;退火处理使材料的晶相发生了改变,晶粒尺寸进一步减小,晶粒分散性变好.薄膜传感器件的测试结果显示,适量 Ti 掺杂和退火处理均可提高器件对 NO 2的灵敏度,退火后 Ti 掺杂2%样品制成的器件的灵敏度最大,其值达到了15.38,响应恢复时间分别为2.2和1.5 min,且具有良好的可重复性和稳定性.

Ti-doped WO 3 nanocrystals with different Ti-doped concentrations are synthesized by hydrothermal method,and annealed at 350 ℃ for 1 h.Morphology and structure of these materials have been characterized by the scanning electron microscopy and X-ray diffraction instrument,the gas-sensing properties to nitrogen diox-ide at 200 ℃ of film sensors made of the unannealed and annealed materials are studied.The results show that Ti-doped can effectively inhibit the growth of nanocrystals,reduce the size of nanocrystals;the crystalline phase of these materials have changed after annealed,the size of nanocrystals is further reduced,the dispersion of nanocrystals becomes better.The tests of the film sensors show that the amount of Ti-doped and annealing can improve the sensitivity of sensors to NO 2 ,the film sensor made of the annealed Ti-doped for 2% has a maxi-mum sensitivity of 15.38 and a good reproducibility and stability,the response and recovery time is 2.2 and 1.5 min,respectively.

参考文献

[1] 杨晓红,孙彩琴,闫勇彦.热处理对WO3薄膜光学性质的影响[J].功能材料,2008(06):1047-1049.
[2] Peng, T.;Ke, D.;Xiao, J.;Wang, L.;Hu, J.;Zan, L..Hexagonal phase WO _3 nanorods: Hydrothermal preparation, formation mechanism and its photocatalytic O _2 production under visible-light irradiation[J].Journal of Solid State Chemistry,2012:250-256.
[3] Teresa Lana-Villarreal;Darnian Monllor-Satoca;Antonio Rodes .Photocatalytic behavior of suspended and supported semiconductor particles in aqueous media:Fundamental aspects using catechol as model molecule[J].Catalysis Today,2007(1/2):86-95.
[4] Kim, YS .Thermal treatment effects on the material and gas-sensing properties of room-temperature tungsten oxide nanorod sensors[J].Sensors and Actuators. B, Chemical,2009(1):297-304.
[5] Imre Miklos Szilagyi;Lisheng Wang;Pelagia-Irene Gouma;Csaba Balazsi;Janos Madarasz;Gyoergy Pokol .Preparation Of Hexagonal Wo_3 From Hexagonal Ammonium Tungsten Bronze For Sensing Nh_3[J].Materials Research Bulletin: An International Journal Reporting Research on Crystal Growth and Materials Preparation and Characterization,2009(3):505-508.
[6] Csaba Balazsi;Lisheng Wang;Esra Ozkan Zayim .Nanosize hexagonal tungsten oxide for gas sensing applications[J].Journal of the European Ceramic Society,2008(5):913-917.
[7] Julien Polleux;Alexander Gurlo;Nicolae Barsan;Udo Weimar;Markus Antonietti;Markus Niederberger .Template-Free Synthesis and Assembly of Single-Crystalline Tungsten Oxide Nanowires and their Gas-Sensing Properties[J].Angewandte Chemie,2006(2):261-265.
[8] Rout CS;Hegde M;Rao CNR .H2S sensors based on tungsten oxide nanostructures[J].Sensors and Actuators, B. Chemical,2008(2):488-493.
[9] 徐宇兴,唐子龙,张中太.氧化钨纳米线敏感膜对CO气体的气敏性能[J].功能材料,2009(06):1046-1048,1052.
[10] Zhang Shaotao;Yang Xiaohong;Ma Yong et al.Effect of annealing on gas sensing performance and microstruc-ture of Ti-WO 3 films[J].Transducer and Microsystem Technologies,2008,27(08):39-41.
[11] Paipitak K;Kahattha C;Techitdheera W et al.Charac-terization of sol-gel derived Ti-doped tungsten oxide elec-trochromic thin films[J].Energy Procedia,2011,9:446-451.
[12] Shieh J.;Feng HM.;Hon MH.;Juang HY. .WO3 and W-Ti-O thin-film gas sensors prepared by sol-gel dip-coating[J].Sensors and Actuators, B. Chemical,2002(1):75-80.
[13] Fu Hongwei;Yang Xiaohong;Ye Lijuan et al.Prepa-ration and optical hydrogen-sensing properties of WO 3:Mo nanocrystal[J].Journal of Functional Materials,2012,43(23):2881-2885.
[14] Wang Lige;Li Guoqing;Hu Yuanrong et al.Study on the structure and electrochromism of WO 3 and Ti-doped WO 3 films[J].Key Engineering Materials,2008,373:726-729.
[15] Yang Xiaohong;Wang Xinqiang;Ma Yong et al.Prep-aration,optical properties and nanocrystalline of optical hydrogen WO 3 film[J].Journal of Functional Materials,2006,37(09):40-42.
[16] 桂阳海,赵建波,王焕新,田俊峰,张永辉.水热法制备Co掺杂WO3气敏材料及其性能研究[J].电子元件与材料,2012(12):26-29.
[17] 杨晓红,马勇,康庆.退火温度对WO3薄膜结构及气敏性能的影响[J].电子元件与材料,2009(08):50-52,65.
[18] Cavicchi R E;Suehle J S;Kreder K G et al.Optimized temperature-pulse sequences for the enhancement of chemically specific response patterns from micro-hot plate gas sensor[J].Sensors and Actuators B-Chemical,1996,33(01):142-146.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%