利用碳纤维编织布为增强体,采用混合粉料模压成型工艺制备 C/C-SiC 复合材料,分析了各个因素对 C/C-SiC 复合材料密度及强度影响的大小以及显著性。研究表明,树脂与石墨粉比例和纤维含量对 C/C-SiC 复合材料密度的影响比较大,而硅粉含量以及配比浓度的影响较小且基本相同；同时树脂与石墨粉比例这一因素对 C/C-SiC 复合材料强度影响也非常显著。并且随着树脂含量的减少,C/C-SiC 复合材料强度降低。
Carbon fiber woven cloth was used as strengthen body in this paper,prepared C/C-SiC composites by mixed powder molding process,various factors that can influence the density and intensity of C/C-SiC compos-ite was analyzed.Research shows influence of resin with graphite powder proportion and fiber content on the C/C-SiC composite density is significant.But impact of content of silicon powder and concentration was negligible. At the same time,the factor of resin with graphite powder proportion on strength of C/C-SiC composite is also very significant.As the resin content decreased,the strength of C/C-SiC composites decreased.
参考文献
| [1] | Hilling W B .Making ceramic composites by melt infiltra-tion[J].AMERICAN CERAMIC SOCIETY BULLETIN,1994,73(4):56-62. |
| [2] | Zbigniew .Process for Cf/SiC composites using liquid pol-ymer infiltration[J].Journal of the American Ceramic Society,2001,84(10):2235-2238. |
| [3] | Hald H;Ullmann T.Reentry flight and ground testing experience with hot structures of C/C-SiC material[A].,2003:1-10. |
| [4] | Naslain R.High temperature ceramic matrix composites[M].London:Woodhead Publications,1993:735. |
| [5] | Campbell T;Ting J;Min J et al.Dynamic properties of 3-D reinforced C/SiC for the RS-2200 liner aerospike en-gine[J].Ceramic Engineering and Society Proceedings,2000,21(3):5 1 7-524. |
| [6] | Walter Krenkel;Bernhard Heidenreich;Ralph Renz .C/C-SiC composites for advanced friction systems[J].Advanced Engineering Materials,2002(7):427-436. |
| [7] | Schulte-Fischedick J.;Zern A.;Mayer J.;Ruhle M.;Friess M.;Krenkel W. Kochendorfer R. .The morphology of silicon carbide in C/C-SiC composites[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(1/2):146-152. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%