综述阴极保护设计中模型研究领域的国内外研究动态,归纳总结模型研究内容及模型研究的各种方法,剖析阴极保护设计中应用的某些模型,讨论模型研究领域的难点和局限性,展望其发展前景.
参考文献
[1] | W V 贝克曼等著,胡士信等译.阴极保护手册.北京:人民邮电出版社, 1990,427 |
[2] | Cathodic Protection-theory and practice, editors by Ashworth V, Booker C J L, London : Ellis Horwood Limited,1986,31 |
[3] | Forsyth M, Bult A, Cherry B W: The 100 mV decay criterion; The effect of Oxygen diffusion, 13th ICC, Melbourne, Australia, 1996, 189 |
[4] | 郭兴蓬,等. 腐蚀科学与防护技术, 1989, 1(2):6 |
[5] | 张勇,阴极保护若干基础问题的研究及在评价管道涂层上的应用(硕士学位论文), 石油大学(北京) , 1997.6 |
[6] | 李相怡,翁永基. 石油学报, 1998, 19(3):98 |
[7] | H H Uhlig 等著,翁永基译.腐蚀与腐蚀控制(第三版).北京:石油工业出版社, 1985,516 |
[8] | 张鸣镝.中国腐蚀与防护学报, 1994, 14(1):77 |
[9] | Dabkowski J. Materials Performance, 1986, 25(1):17 |
[10] | DeCarlo E A. "Computer Aidede Cathodic Protection Design Techonique for Complex Offshore Structures", Corrosion/82(NACE),Houston, 1982,165 |
[11] | Strong G E, Adey R A, Rudas R S: Computer prediction of interference current corrosion, 13th ICC, Melbourne, Australia, 1996,56 |
[12] | Machczynski W. Analysis of cathodic protection of underground conductors using simulation programs, 13th ICC, Melbourne, Australia, 1996,51 |
[13] | Machczynski W. Computer simulation of cathodic protection of underground conductors of arbitrary, CORROSION ASIA '94, Singapur,1994, 1098-1 |
[14] | Emenike C O. Mathematical modelling of cathodic protection sysytems for oil and gas facilities, Anti-Corrosion Methods and Materials, 1995, 42(4):6 |
[15] | Hack H P, Janeczko R M. Verification of boundary element modeling technique for cathodic protection on large ship structures, report No TR-61-93/02, Carderock Division, Naval Surface Warfare Center, USA |
[16] | 郭兴蓬.油田地面工程, 1992,11(4): |
[17] | Lindsay M A. Cathodic Protection, New York: McGraw-Hill Book Company, Inc. 1960, 134 |
[18] | Fu J W, Chow J S K. Materials Performance, 1982, 21(10):9 |
[19] | Decarlo E A. Materials Performance, 1983, 22(7): 38 |
[20] | Gartland P O, Strommen R D, et al. Materials Performance, 1993, 32(12): 15 |
[21] | 邱枫,徐乃欣. 中国腐蚀与防护学报, 1996, 16(1): 29 |
[22] | Cochran J, Bass J T. Computer analysis/optimization of anode geometries for congested anode arrays, Corrosion/86(NACE), Houston, 1986,47 |
[23] | Waard C. Materials Performance, 1994, 33(10): 17 |
[24] | Strommen R. Materials Performance, 1985, 25(3):9 |
[25] | Sale J P. The Evaluation of Anode Configurations for the Internal Protection of Pipes, European Federation of Corrosion Conference, London, 1968 |
[26] | 李相怡,翁永基.腐蚀科学与防护技术,1998, 10(2):65 |
[27] | Grigorev V P. J. Appl. Chem. USSR, 1961, 34(1): 169 |
[28] | Tighe-Ford D J,et al. Corrosion Provention & Control, 1990, 37(2): 5 |
[29] | Thompson N G, et al. Exploring the complexity of the mechanism of cathodic protection, Corrosion/94(NACE), Baltimore,1994,580 |
[30] | 陈绍伟, HARTT W H.腐蚀科学与防护技术, 1996, 8(1): 17 |
[31] | Fessler R R, Markworth A J, Parkins R N. " Cathodic Protection Levels under Disbonded Coatings", Corrosion/82(NACE),Houston, 1982,119 |
[32] | Kenne K J, Bone L, Orazem M E. Corrosion, 1993, 49(3): 199 |
[33] | Newman J. J. Electrochem. Soc., 1991,138: 3554 |
[34] | Han M K. Seasonal variations on cathodic protection requirements, Amer Gas Ass Oper Sect Distribution/Transmission Conf, Mew Orleans, 1989, 110 |
[35] | Davis J G, et al. The influence of environmental conditions on the design of cathodic protection systems for marine structures, 3rd Annu Offshore Technol. Conf. , 1971, V2, II-425 |
[36] | Brichau F, Deconinck J. Corrosion, 1994, 50(1):39 |
[37] | Seager W H. Materials Performance, 1980 , 19(6):9 |
[38] | 张鸣镝.腐蚀科学与防护技术,1996, 8(3):219 |
[39] | 翁永基,李相怡. 油气储运, 1998, 17(1):35 |
[40] | Strommen R D. Computer Modeling in Corrosion, ASTM STP 1154, R S Munn Ed., Philadephia, 1992, 229 |
[41] | 翁永基.腐蚀科学与防护技术,1998 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%