GH4169合金在850℃、950℃和1040℃条件下氧化符合抛物线动力学规律.氧化物层为Ti0.95Nb0.95O4+Cr2O3+(Cr.Fe)2O3的复杂结构,高温下氧元素扩散导致氧化层为岛状结构,在一定氧化时间,氧化层深度与温度是对数函数关系,氧化反应激活能为143.52 kJ/mol.温度高于1040℃氧化物剥落.
参考文献
[1] | 工程材料实用手册编辑委员会.工程材料实用手册[M].北京:中国标准出版社,1989.332. |
[2] | 王春生,倪海桥,于峰.Inconel 718和GH169合金的低周疲劳性能[J].金属学报,1995,31增刊:45. |
[3] | 鲁风鸣,金槿秀.GH169合金涡轮盘件长期时效组织稳定性的研究[J].金属学报,1995,31增刊:14. |
[4] | T Sims, S Stoloff, C Magel. SupperalloysⅡ[M].New York John wiley: 1987, 293. |
[5] | 赵公台,赵克清.金属高温氧化导论[M].北京:冶金工业出版社,1989,67. |
[6] | 黄乾尧,李汉康.高温合金[M].北京:冶金工业出版社,2000,101. |
[7] | Lalit Kumar, R Venkataramani, M Sundaraman, et al. Studies on the oxidation behavior of inconel 625 between 873 and 1523K [J]. Oxidation of Metals, 1996, 45(1/2) :221. |
[8] | J H Chen, P M Rogers, J A Little. Oxidation behavior of several chromia- forming commerical nickel-base superalloys[ J ]. Oxidation of Metals, 1997, 47(5/6) :381. |
[9] | B Ahmad, P Fox. STEM analysis of the transient oxidation of a Ni - 20Cr alloy at high temperature [J]. Oxidation of Metals,1999, 51(1/2): 113. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%