本文讨论了注塑成型黄麻纤维增强聚丙烯的制备方法和力学性能.将纤维重量含量分别为10%、20%和30%的复合材料进行比较,分析纤维含量对复合材料拉伸、弯曲和冲击性能的影响;将纤维分别切成约3mm、5mm和10mm长制成复合材料进行比较,分析纤维长度对复合材料拉伸、弯曲和冲击性能的影响.掺入黄麻纤维能使聚丙烯的拉伸和弯曲性能提高,但使其冲击强度降低;随纤维含量的增加或纤维长度的增加,复合材料的强度和模量是递增的,而冲击强度是递减的.
参考文献
[1] | 余权英 .黄麻塑料复合材料[J].高分子通报,1991,2:72-76. |
[2] | A C Karmaker;J A Youngquist .Injection molding polypropylene reinforced with short jute fibers[J].Journal of Applied Polymer Science,1996,62(08):1142-1151. |
[3] | A. C. Karmaker;J. P. Schneider .Mechanical performance of short jute fibre reinforced polypropylene[J].Journal of Materials Science Letters,1996(3):201-202. |
[4] | A K Rana;A Mandal;B C Mitra;R Jacobson .Short jute fiber reinforced polypropylene composites: effect of compatibiliar[J].Journal of Applied Polymer Science,1998,69(03):329-338. |
[5] | A K Rana;B C Mitra;A N Banerjee .Short jute fiber reinforced polypropylene composites: dynamic mechanical study[J].Journal of Applied Polymer Science,1999,71(04):531-539. |
[6] | J G Andrzej;K Bledzki .Influence of fiber surface treatment on the creep behavior of jute fiber reinforced polypropylene[J].Journal of thermoplastic composite materials,1999,12(08):388-398. |
[7] | 杨桂成;曾汉民 .剑麻纤维树脂基复合材料研究和展望[J].工程塑料应用,1997,25(05):56-58. |
[8] | 张长安,张一甫,曾竟成.苎麻落麻纤维增强聚丙烯复合材料研究[J].玻璃钢/复合材料,2001(06):16-17,27. |
[9] | 王惠民 .亚麻纤维加强复合材料的纤维性能研究[J].麻纺织技术,1998,21(05):19-21. |
[10] | 李欣欣;普萨那 .天然椰壳纤维及其增强复合材料[J].上海化工,1999,24(14):28-30. |
[11] | 王俊勃,赵川,高晓丁,郑水蓉,孙曼灵.苎麻纤维增强酚醛复合材料的研究[J].纤维复合材料,2001(01):13-15. |
[12] | 郑融;冼杏娟;叶颖薇 等.黄麻纤维/环氧复合材料及其性能分析[J].复合材料学报,1995,12(01):18-25. |
[13] | 曾竟成,肖加余,梁重云,张长安,张纯禹.黄麻纤维增强聚合物复合材料工艺与性能研究[J].玻璃钢/复合材料,2001(02):30-33. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%