LCM监控技术研究进展

玻璃钢/复合材料, 2004, (5): 26-30. doi: 10.3969/j.issn.1003-0999.2004.05.009

LCM监控技术研究进展

祝颖丹 ^1, , 田正刚 ^2, , 王继辉 ^3, , 孟志华 ^4,

1.武汉理工大学,武汉,430070

2.武汉理工大学,武汉,430070

3.武汉理工大学,武汉,430070

4.武汉理工大学,武汉,430070

基金项目: 国家高技术研究发展计划(863计划)(2001AA335020)

关键词： LCM , 传感器 , 监控

RESEARCH PROGRESS IN SENSING TECHNOLOGY OF LCM

本文综述了LCM工艺监控用传感技术的研究进展,分析了其传感器原理、测量信息范围、适用场合及优缺点等,重点介绍了光纤传感技术在LCM上的应用现状,并对此领域的工作进行了展望.

参考文献

[1]	Akihisa Kikuchi;Evelitsa Higuerey;John Coulter .An experimental investigation of resin flow sensing during molding processes[J].Journal of engineering materials and technology,1995(1):86-93.
[2]	T. Luthy;P. Ermanni .Linear direct current sensing system for flow monitoring in Liquid Composite Moulding[J].Composites, Part A. Applied science and manufacturing,2002(3):385-397.
[3]	Aurimas Dominauskas;Dirk Heider;John W. Gillespie Jr .Electric time-domain reflectometry sensor for online flow sensing in liquid composite molding processing[J].Composites, Part A. Applied science and manufacturing,2003(1):67-74.
[4]	D. Abraham;R. Mcllhagger .Glass fibre epoxy composite cure monitoring using parallel plate dielectric analysis in comparison with thermal and mechanical testing techniques[J].Composites, Part A. Applied science and manufacturing,1998(7):811-819.
[5]	G.M.Maistros.Dielectric cure monitoring and optimization in RTM[A].ID-1618
[6]	涂亚庆;刘兴长.光纤智能结构[M].重庆:重庆出版社,2000
[7]	WANG X et al.Experimental investigation of piezoelectric wafers in monitoring the resin transfer moulding process[J].Smart Materials and Structures,1998,7(01):121-127.
[8]	G A Barandun et al.Three-dimensional permeability measurement based on ultrasonic sensors[R].
[9]	Wu Cheng-Hsin et al.Trans-plane fluid permeability measurement and its applications in liquid composite molding[J].Polymer Composites,1994,15(04):289-305.
[10]	KUEH SYLVIA R.M. .Sensor Placement Study for Online Flow Monitoring in Liquid Composite Molding[J].Polymer Composites,2000(3):436-449.
[11]	Udd E.Overview of Fiber Optic Application to Smart Structures. Review of Progress in Quantitative Nondestructive Evaluation[M].Plenum Press,1998
[12]	Tatsuro Kosaka.Cure monitoring of FRP by FBG fiber optic sensors in RTM molding process[A].ID-1611
[13]	Sylvia R.M. Kueh;Richard S. Parnas;Suresh G. Advani .A methodology for using long-period gratings and mold-filling simulations to minimize the intrusiveness of flow sensors in liquid composite molding[J].Composites science and technology,2002(2):311-327.
[14]	Levin K;Nilsson S.Examination of reliability of fiber optic sensors embedded in carbon/epoxy composites[A].,1996:222-229.
[15]	Jenson D W;etal.Degradation of graphite/bismaleimide laminates with multiple embedded fiber optic sensors[A].,1990:228-237.

上一张下一张

上一张下一张

计量

下载量()
访问量()

作者相关

文章评分

您的评分：
1

0%
2

0%
3

0%
4

0%
5

0%