本文采用漏嘴中套芯管的特殊结构的拉丝坩埚,在稳定拉丝工艺参数的条件下研究了空心高强玻璃纤维的空心度K与芯管内径Фxn、漏嘴内径Фzn等结构参数的关系,归纳总结出如下关系式K=3.83фXN6.62фZN-3.19.经过验证,此式可作为设计不同空心度的空心高强玻璃纤维拉丝坩埚漏嘴结构的参考依据.
参考文献
[1] | D R Hartman.Owens-corning science and technology center[A].,1993 |
[2] | A J Burreson.Boeing commercial airplane group[A].,1992 |
[3] | G Niederstadt.Investigation of hollow glassfiber for the development of reinforced plastics.Institute for Aircraft Construction,Plastic Materials Department,Brunswick[J].West Germany,1976 |
[4] | 梁中全.空心玻璃纤维拉丝坩埚的漏嘴结构参数研究[J].硅酸盐通报,1997(05) |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%