本文首先对拉挤模具内热传导和固化反应动力学理论进行了分析研究,在合理假设的基础上,建立了适合碳纤维抽油杆拉挤模具内温度和固化度分布的数学模型.使用第三方软件PulModel对开发的计算机程序进行了验证,模拟结果与第三方软件的计算值吻合较好.
参考文献
[1] | Xiao Lin Liu;I. G. Crouch;Y. C. Lam .Simulation of heat transfer and cure in pultrusion with a general-purpose finite element package[J].Composites science and technology,2000(6):857-864. |
[2] | 张芳.碳纤维/热固性树脂拉挤成型工艺探讨[J].塑料工业,1995(05):18-21. |
[3] | 张健伟;孔义.环氧复合材料拉挤工艺研究[J].玻璃钢/复合材料,1998(03):41-47. |
[4] | 卞忠义.拉挤成型固化工艺探索[J].热固性树脂,2002(01):24-26. |
[5] | Price H L .Curing and flow of thermosetting resins for composite material pultrusion[D].Old Dominion University,1979. |
[6] | M Valliappan;J A Roux;J G Vaughan .Die and post-die temperature and cure in graphite/ epoxy composites[J].Composites Part B:Engineering,1996,27B:1-9. |
[7] | Chen CH.;Yen CC. .Mathematical model for the pultrusion of blocked PU-UP matrix composites[J].Journal of Applied Polymer Science,2003(7):1996-2002. |
[8] | Basuki R Suratno;Lin Ye;Yiu-Wing Mai .Simulation of temperature and curing profiles in pultruded composite rods[J].Composites Science and Technology,1998,58:191-197. |
[9] | R S 戴夫;A C 卢斯.高分子复合材料工程[M].北京:化学工业出版社,2004 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%