玻璃纤维是一种性能优越的增强材料,广泛应用于制造业.本实验采用手工制备的高强玻璃纤维布层合板,平均厚度为20mm,并使用普通的高速钢(HSS)钻头,较真实地反应了一般钻削加工过程,使实验结果更具有实际意义.实验中利用现有设备,自制的传感器用于测定轴向力,对不同切削参数下的状况进行分析,最后使用显微镜观察微观状态下的分层状态,对得到的结论加以佐证.
参考文献
| [1] | W Koenig;P Grab .Quality definitions and assessment in drilling of fiher reinforced thermoses[J].Ann CIRP,1989,38(01):119-124. |
| [2] | E. Ugo. Enemuoh;A. Sherif El-Gizawy;A. Chukwujekwu Okafor .An approach for development of damage-free drilling of carbon fiber reinforced thermosets[J].International Journal of Machine Tools & Manufacture: Design, research and application,2001(12):1795-1814. |
| [3] | Paulo Davim;Pedro Reis .Drilling carbon fiber reinforced plastics manufactured by autoclave-experimental and statistical study[J].Materials & Design,2003,24:315-324. |
| [4] | W Chen .Some experimental investigations in the drilling of carbon fibre reinforced plastic(CFRP)composite laminates[J].International Journal of Machine Tools and Manufacture,1997,37(08):1097-1108. |
| [5] | R.Piquet;B.Ferret;F.Lachaud;P.Swider .Experimental analysis fo drilling damage in thin carbon/epoxy plate using special drills[J].Composites, Part A. Applied science and manufacturing,2000(10):1107-1115. |
| [6] | Houjiang Zhang;Wuyi Chen;Dingchang Chen .Assessment of the Exit Defects in Carbon Fibre-Reinforced Plastic Plates Caused by Drilling[J].Key engineering materials,2001(196):43-52. |
| [7] | Edoardo Capello .Workpiece damping and its effect on delamination damage in drilling thin composite laminates[J].Journal of Materials Processing Technology,2004(2):186-195. |
| [8] | J Paulo Davima;Pedro Reisa C .Conceicao Antoniob 1.Drilling fiber reinforced plastics(FRPs)manufactured by hand lay-up:influence of matrix(Viapal VUP 9731 and ATLAC 382-05)[J].Journal of Materials Processing Technology,2004,155-156:1828-1833. |
| [9] | H. Hocheng;C.C. Tsao .The path towards delamination-free drilling of composite materials[J].Journal of Materials Processing Technology,2005(2/3):251-264. |
| [10] | 何道清.传感器与传感器技术[M].北京:科学出版社,2004 |
| [11] | Jose Mathew;N. Ramakrishnan;N. K. Naik .Investigations into the effect of geometry of a trepanning tool on thrust and torque during drilling of GFRP composites[J].Journal of Materials Processing Technology,1999(1/3):1-11. |
| [12] | 李志强,樊锐,陈五一,陈鼎昌.纤维增强复合材料的机械加工技术[J].航空制造技术,2003(12):34-37. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%